Question about Packard Bell Speaker Computer Speakers

1 Answer

Please i need a solution to my packard bell computer.....if am make calls on my system the person am calling can not hear me but i can hear they.am sure its not sound promble what can i do..

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

Go to control panel and double click on sound and audio devices.and click on audio tab
and select the sound recording.and click on volume box in that.you can see recording mixer.
you can see some controllers in that and check mic controller have in it.if not select option
and then properties. and put the tick mark in-front of mic and click on OK. after that you
can see mic controller on the recording mixer.
after that check , you can see button named as "advance" on botom in mic controller.
if cant see click on option and put the tick in-front of advance controller word. now you can see
that advance button in mic controller.
click on that button and put the tick on mic 1 boost. close all tabs and check

Posted on Jan 03, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Packard Bell Master CD


If I where looking for this, I'd hit up yellowpages.com and look for all computer shops, antique malls, pawnshops and flea markets in the area and start making calls to see if they have antiquated technology laying around.

I, personally, love tinkering around with these old machines. It's been a hobby since they where new! lol And I'm a pawn broker, so I'd be one shop that may have what you need. (I don't, unfortunately, I looked.) And you'd be shocked what all you can find for a quarter at a flea market or an antique mall.

Mar 06, 2014 | Computers & Internet

1 Answer

Error 0xc000000f while formatting hard drive


try some formating toos .. like hiran boot cd or disk or diskformater ...u can use usb bootable device to install windows, u can make ur personal pen drive to bootable pen drive.

Jun 02, 2013 | Packard Bell Computers & Internet

1 Answer

I have a Packard Bell iMedia SL 9553, The odyssey Boot Floppy has been lost, Any Way I could get a copy to restore the computer using the Master Discs I have?


YES YOU WOULD BE ABLE TO Call packard bell and show them proof of purchaase and get them sent out to you now packard bell was bought out by hewit packard and there number is or you could go to this website and get any driver you would need http://list.driverguide.com/list/company788/

Jan 14, 2011 | Packard Bell iMedia SL 9553 (P660401806)...

2 Answers

I need to factory restore my computer (packard-bell computer but dont know how to do this. can you please advise. I Have a really rubbish slow packard bell computer and need to factory restore it and i...


Hi,
The best step forward , would be to call Packard Bell Tech support and get your CDs for the same. There is no reset feature on the computer.

Thanks
proton

May 26, 2009 | Packard Bell Easy One Silver 2120 Notebook

1 Answer

I bought a packard bell laptop, i lost the cd that came with it. i need a replacement cd please, i have the product key number under the laptop


You can call packard bell and with a little of your info they should be able to send you a replacement disk.

Dec 08, 2008 | Computers & Internet

1 Answer

Computer starts but screen is black,fan is running,hocked up moniter but no signal being sent??? packard bell easy note


check the primary memory or the RAM chips as it is called...

try booting with single chip if 2 are present..it may be the problem

Aug 13, 2008 | Packard Bell Computers & Internet

2 Answers

Packard bell diamond 1200 plus scanner


Hi!-- rechecked box -- it's called :TWAIN_32 Twacker -- hope this clears any access problems .

Jul 02, 2008 | Packard Bell Packard-Bell Full Page...

1 Answer

Packard bell restore new Hdu


From parkard bell suppport website Quote

"Step 4 - Re-installing your software
Call the help desk and ask them to guide you through the
ExtHS process.
Please have your Recovery CDs to hand when you call
the Easy Repair line.

Once you have completed the ExtHS process you will
need to re-install Windows and the other software supplied
with your Packard Bell computer. To do this follow the
steps below:
1. Disconnect all peripheral devices (web cam, printer,
scanner, broadband modem etc.).
2. Insert the Packard Bell Master CD 1 / DVD in the top
CD / DVD drive and restart your computer.
3. The CD will load and display the following message:
Please refer to the section headed Packard Bell
Recovery Program in your user’s guide for instructions
on this utility. Press OK if you want to continue
or Cancel to return to DOS.
4. Press the letter O on your keyboard to continue.
5. You will see a menu with options. Please select option 1
“Standard System Restore”
by pressing the 1 key on
your keyboard.
6. A warning message about data loss will be displayed.
Press the letter O to continue.
7. The process will take around 40 minutes. Once this is
done you will need to restart your PC. Remove the CDs
and store them in a safe place.
8. If there was a Software Library DVD supplied with your
PC you can use this to install the extra software that was
supplied with your computer. Insert this into the drive
and follow the onscreen instructions.
9. Finally, you will need to install any additional devices
(web cam, printer, etc.) and software by following the
instructions supplied with them."


Jun 09, 2008 | Packard Bell Computers & Internet

1 Answer

I wish to restore my packard bell easynote back to its factory settings but when i bought it it did not have a dics. can i do this any other way? regards martin


Getting any information from Packard Bell is like pulling teeth. I recommend looking on ebay for the recovery discs. Or borrow someone's XP CD and insert the key on the bottom of your computer. If you can't get a CD you can call microsoft and purchase one for $27.

I know this is not what you want to hear. But if you have patience you can write to Packard Bell.

Packard Bell BV
Jonkerbosplein 52
6534 AB Nijmegen
Po Box 6925
6503 GK Nijmegen
The Netherlands

Mar 05, 2008 | Computers & Internet

Not finding what you are looking for?
Packard Bell Speaker Computer Speakers Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Packard Bell Audio Players & Recorders Experts

David
David

Level 3 Expert

778 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

SHIVAJI YADAV
SHIVAJI YADAV

Level 2 Expert

188 Answers

Are you a Packard Bell Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...