The code is change, how can to reset, if we did'nt know the new code?

Sorry there is'nt a general code for the model, codes are specific to the radio, if you know the suppling dealer from new, you can contact them with the VIN number and they will normally have the original code listed, which is ok as long as the code has'nt been changed during it' life. The other alternative is to go to a local radio shop, where for a small fee can normally unlock the code and present you with a current one,

ur defalt phones codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000

Type *#06# at the mobile screen to know IMEI no of your mobile.
send the IMEI no to me and i will reply you with unlocking code.
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved

Contact emachines

go to setting and look for restore factory default, if ask for the lock code,the default is 12345

if you got a wrong code and you did'nt know,bring it to a mobile service technician or center for assistance...







hope it helps...please rate me..thanks

First did you reset the computer after replacing the EGR valve if you don't the computer doe'nt reconize the new sensor so it doe'nt reset the peremiters.Then check all passages and lines in the intake manifold there could be a clogg somewhere.Go to www.rockauto.com and you'll find EGR pressure sensor for under $30.00.

Did you reset the computer because if you don't the computer does'nt reconize the new sensor and it will run as if you did'nt even replace it.You can reset it with a scan tool,or take the ground cable off battery for 30 seconds or pull the ECM fuse then put it back.

The passcode for this and it never changes is 0000 you would input this into your handset for pairing, let me know if you still have trouble, Thanks for using fixya.com

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

You should try changing out the thermistor first. That is the likely culprit. Not too bad of a repair. The main pcb could also cause this, but i would r and r the thermistor first. HTH

Hello

Thank you for using FixYa for your problem

What version of IE8 are you running, (image is showing beta) but do a IE update and maybe a reset for IE, (tools, Internet Options, last tab and you see the reset button)

Please rate our solutions and if you still have problems please call back for more ideas to help you

Thanks
Richard Scott
Technical Support
New Zealand

i can understand the question please say clearly