Question about Zanussi 24 in. DE6850 Free-standing Dishwasher

Open Question

Zanussi Aquapulse DE6850

Won't work in any programme, this started approximately one year ago. Called out Zanussi technician, when he called out it worked perfectly, he could not find any problem. Happened a couple of days later again and has been happening on and off since. Won't work one day, try the next day and it works. Now it wont work at all. Programme lights just flash but it wont start. Can anybody give any suggestions???

Posted by on

  • jnbre Jul 11, 2008

    Won't work in any programme, this started approximately one year ago.
    Called out Zanussi technician, when he called out it worked perfectly,
    he could not find any problem. Happened a couple of days later again
    and has been happening on and off since. Won't work one day, try the
    next day and it works. Now it wont work at all. Programme lights just
    flash but it wont start. Can anybody give any suggestions???

×

5 Suggested Answers

  • 883 Answers

SOURCE: Zanussi Aquapulse DE6544 not emptying

find the power source (usually at the circuit breaker panel)-then turn the breaker for the dishwasher off and return to on after 10 minutes and try restarting.

Posted on May 27, 2007

  • 1 Answer

SOURCE: Problem with dishwasher

After water is in dishwasher, as it begins to clean it makes a loud grinding sound and it deposits a fine substance on dishes especially glasses and cups

Posted on Jan 28, 2008

  • 1 Answer

SOURCE: Zanussi Aquapulse DE6544 not emptying

Zanussi Aquapulse dishwasher - is filled with water inside, is not washing and the lights keep flashing on and off - has anyone any idea what may be wrong with it?

Posted on Sep 29, 2009

SOURCE: I have a Zanussi DE6850 free-standing dishwasher.

Hello,
You seem to have a blockage,have you checked the filters lately.Also check the drain hose and the pipe that the drain hose goes into,if they are clear then the blockage is down in the bottom of the dishwasher in the pipes or the drain pump.

Hope this helps.

Posted on May 21, 2010

  • 18 Answers

SOURCE: Stopped Working

The problem is with the PCB, this is the board behind the buttons, you can buy this for £120 or you can get it fixed by QEA for about £45 link below. I am not an engineer but I replaced mine in 10 minutes.
http://www.qualityelectronicrepairs.co.uk/lists/laundrymodels-zanussi_1.html

Posted on Aug 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the heating element on a zanussi de6850 dishwasher


remove RHS panel and you will see it bottom right. looks like a round cylinder with wires going into it.

if not heating worth looking at main board as wel for a broken solder joint on heater relay. bit of solder will sort this

Oct 19, 2010 | Zanussi 24 in. DE6850 Free-standing...

1 Answer

I have a Zanussi DE6850 free-standing dishwasher. Have just put on a 65 degree programme. After approximately 1 minute the machine has stopped functioning and the top two lights are flashing and water...


Hello,
You seem to have a blockage,have you checked the filters lately.Also check the drain hose and the pipe that the drain hose goes into,if they are clear then the blockage is down in the bottom of the dishwasher in the pipes or the drain pump.

Hope this helps.

May 21, 2010 | Zanussi 24 in. DE6850 Free-standing...

1 Answer

Zanussi Aquapulse DE6854 dishwahser programe lights not working


hi
got same probleme with my aquapulse 4744 slimline

Oct 07, 2009 | Electrolux Dishwashers

3 Answers

ZANUSSI DE6855 DISHWASHER - NO HEAT FOR WASHING OR DRYING


Make sure you unplug before you start. I had the same problem with a DE6850. The heater was ok. Metered at 25.ohms. Apparently, the relay on the control board mounted in the front door behind the switches is a common fault. Remove the screws around the top part of the door and you will be able to get at the control module. Resolder the connection. Zanussi reliability has been lost. Noel P31bf5e2.jpg

Apr 12, 2009 | Zanussi 24 in. DE6850 Free-standing...

4 Answers

Wont heat or dry


hi have you tried thermostat i repaired on last week same fault

Dec 20, 2007 | Zanussi 24 in. DE6850 Free-standing...

1 Answer

Dishwasher zanussi aquapulse


this sounds lie a door interlock, in most models this is a micro switch where the handle is inside the top of the door casing, i would start there, based on the info that you have given

Sep 19, 2007 | Zanussi 24 in. DE6965 Built-in Dishwasher

2 Answers

Zanussi Aquapulse DE6544 not emptying


Zanussi Aquapulse dishwasher - is filled with water inside, is not washing and the lights keep flashing on and off - has anyone any idea what may be wrong with it?

May 27, 2007 | Zanussi 24 in. DE6544 Built-in Dishwasher

1 Answer

Dishwasher was tipped and won't run


I have the same problem if you take off the tray below the front door and set a small blow heater in there it will dry the out the anti flood switch. It usally takes about 25 mins for the machine to start working again.

Feb 21, 2007 | Zanussi 24 in. DE6850 Free-standing...

2 Answers

Stopped Working


The problem is with the PCB, this is the board behind the buttons, you can buy this for £120 or you can get it fixed by QEA for about £45 link below. I am not an engineer but I replaced mine in 10 minutes.
http://www.qualityelectronicrepairs.co.uk/lists/laundrymodels-zanussi_1.html

Sep 25, 2006 | Zanussi 24 in. DE6744S Free-standing...

Not finding what you are looking for?
Zanussi 24 in. DE6850 Free-standing Dishwasher Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

paulcarew

Level 3 Expert

1863 Answers

Are you a Zanussi Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...