Question about Asko 24 in. 1585 Built-in Dishwasher

1 Answer

All lights on panel stay lit up & pushing "stop" will not make them go off nor will opening the door make the lights go out. There is a "running/pumping" sound that does not go away. There is no water in the machine. The only way to get the running sound to stop and lights to go off is to cut off the main house breaker.

Posted by on

  • patriciastea Jan 03, 2011

    That's not much help, Dennis. You tell me it is the control panel but we are not repairmen and don't know where we get an Asko 1585 control panel. So, tell me where we get a control panel, how is it put in, etc. Thanks.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,323 Answers

Hi

The issue is with the control board that is bad and should be replaced. Opening and closing the door did not help so the door switch-lock assembly appears to be fine, and the unit won't fill at all so it is the control board that is bad. Hope this helps...please post back for further assistance.

Daniel

Posted on Jan 03, 2011

  • Daniel Scott
    Daniel Scott Jan 03, 2011

    Dennis....You can buy the part from this link and also I just checked this model is under recall....you can call Asko at 866-309-9921 & confirm with them by giving them your serial no before you start any kind of repair.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Interior light stays on when driving.goes off when I use key fob to lock


Interior lights will not turn off when door closed - VW Audi Forum

www.vwaudiforum.co.uk/.../36009-Interior-lights-will-not-turn-off-whe...
... locking when using key fob, only from the inside via the lock on the drivers door ...by key fob and manually turn off the interior lights but the door lights stay on.

close door light & interior lights - CarGurus

www.cargurus.com > Questions > Ford > Edge

CarGurusJul 24, 2010 - close door light & interior lights - close door light on my ford edge is lit up on the dash and the interior lights wont go off. all the doors, truck, and . ... are completly shut. what to do? help before my battery goes dead. ... charged Interior lights work Headlights are strong Key fob locks and ... Used Ford Escape".

Door Chimes, interior lights on when stopped, and power locks have ...

www.grandamgt.com > ... > Technical Q&A

Apr 28, 2011 - 13 posts - ‎5 authors
It really only happens when its totally stopped while in drive. ... Key Fob- It works, but no longer gives the horn sound to confirm its locked. ... The fact that the car doesn't honk when using the remote isn't a problem. ..... Currently my dome light stays lit when on the door position and my alarm goes off as soon ...

Help - Interior lights staying on / door locks going crazy ...

www.mazda3forums.com/...interior.../329450-help-interior-lights-stayin...
Feb 11, 2009 - It seems that my interior lights stay on while im driving. ... If you get into the car start up the car, and then close the door the lights shut off. ... the when youuse the key fob to lock the car at night the interior lights stay on as well.

Jan 27, 2016 | Cars & Trucks

2 Answers

Door light symbol stays on dash panel what is problem


door is partially open or switch on a door is out of position.
takes 2 people but goes fast. open each door and manually
push the switch open to break contact and stop the circuit from
working.

Feb 12, 2013 | Chevrolet Cars & Trucks

1 Answer

My dryer ran fine with my last load of only 3 towels. I haven't had any problems with my dryer before. I went to "wrinkle release" my towels and nothing happened. No lights, no 18min. showed...


Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor goingbad...

Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101

Aug 03, 2011 | Maytag Neptune MDE5500AY Electric Dryer

1 Answer

We have a LiftMaster 973LM model - the remote only opens the door, but when it starts to close, it only goes down a tiny bit, then goes back up. The "Inside" remote however, you now have to press...


Check the sensors in the doorway. They must be pointed at one another and the small light on each one must be lit and not flickering. Tweak them a bit. If you cannot get both lights to come on you have bad sensors.

Jul 07, 2011 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

We have a LiftMaster 973LM model - the remote only opens the door, but when it starts to close, it only goes down a tiny bit, then goes back up. The "Inside" remote however, you now have to press...


Check your door sensors. They must be pointed at one another and the small light on each one needs to be lit and not flickering. Tweak them a little. If you cannot get both lights to come on you have bad sensors.

Jul 07, 2011 | Sears Craftsman LiftMaster Chamberlain...

2 Answers

Dishwasher won't run. keypad buttons light when pushed, and I've locked and unlocked the keypad, which seems to be otherwise functioning normally. It has been working fine until now. I push...


Hello, welcome to FixYa. If you can provide the model number (usually on inside of door frame or tub frame around door opening) and make/brand name, I'll see what I can find for you. It does sound like a door switch, but I'll need to clarify the make & model before moving forward. Regards, Macmarkus :)

Jun 04, 2011 | Dishwashers

1 Answer

My Frigidaire Dishwasher FDB1050RES2 gets stuck in a rinse cycle. The light on the front will be lit "clean" but the bottom of the washer is full of water. Opening the door does not turn off...


by the descrition you are giving you will need to replace the main control board.Part number 154568401.you may also need to check the float switch.The part will run about 110.00 dollars from a local parts store

Dec 29, 2010 | Frigidaire 24 in. FDB1050RE Built-in...

1 Answer

The door opens when i push to open but when i push to close it starts to close until i stop pushing the button. When i release the button the garage door opens back and clicks 10 times


Check the door sensors. They must be pointed at one another and the small light on each one must be lit and not flickering. Tweak them a bit. If you cannot get both lights to come on you have either a bad sensor or the wiring to them is shorted or broken.

May 11, 2010 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

The door opens when i push to open but when i push to close it starts to close until i stop pushing the button. when i release the button the garage door opens back and clicks 10 times


Check your door sensors. The need to be pointed at one another and make sure the small light on each one is lit and not flickering. Tweak them a bit. If you can't get both lights to come on one of your sensors has failed.

Mar 18, 2010 | Sears Craftsman LiftMaster Chamberlain...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Asko Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Owen Barnes

Level 3 Expert

867 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Are you an Asko Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...