Question about Nokia X3 Cell Phone
There are two possible causes for this
1. it could be the firmware of your fone. the firmware is the application that enables the fone to startup when the power button is pressed. if the firmware is corrupt, you might have to flash your fone and this has to be done by a professional using a special software
2. it could be your flex, a flex is a set of flexible wires which carry signals among components of the fone. if it broken inside, the screen might not come on. this is a likely case because flex is usually found in flip and slide fones. if this is the case, it will have to be changed by a professional
i hope this solves the problem, remember to rate this solution, and comment for more information
Posted on Jan 03, 2011
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Nov 02, 2013 | JVC Dla X3 3d Projector
Aug 06, 2011 | Nokia X3 Cell Phone
First download and install Pheonix. Nokia Phoenix Service Software 2011 - Download secondly Download flash file from this link X3 file or Nokia flash file and install it to C / programme files/pheonix..after finished this installation open pheonix Inside the interface at the> left top <there you see "File" click there and choose "open file" and then select the approprait Product type i.e"which is written in the back banel inside the battery of every Nokia(Type RM-000).After doing this again at the left top count from "File"1..2..3..the 4th one is "Flashing" press there when you click there you'll see three icon just select the "Firmware Update" again you'll see another interface.Look at the product code there should be blank and put your "mouse tool" at the straight end from the "Product Code" there is a Botton and choose the code which is written in the back side of your phone.e.g CODE:0000000.if the same code does not found just take one.After this you can see "Dead phone USB flashing" click that box.Now this is the last stage... Connect your phone with the USB to your PC and let the driver install ...wait for a moment.(If your phone working).Lastly after just finished (In case your phone is Dead,unable to switch on in normal mode start from here) Connect the phone to pc without powering...insert good battery and Click the "Referbish" after this, a message will prompt you "press power botton" press it and wait untill the phone will Restart automaticlly in normal mode 10-15 minutes.If you cannot understand just make a Reply thanks for visiting fixya.Good luck.If you could not do please contact me.
Jul 25, 2011 | Nokia X3 Cell Phone
Nov 06, 2010 | Nokia X3 Cell Phone
Sep 03, 2009 | Nextar X3-08 Car GPS Receiver
May 30, 2008 | Dell Axim X3 Pocket PC
24 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: