Question about Office Equipment & Supplies

Open Question

Dell 2135 cn printer is saying to replace phd now. where do I buy this and how do I do it?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
bunnydawg
  • 5158 Answers

SOURCE: Error Code 004-332

try unplugging it for about 10 minutes and starting it up again... that hopefully will reset it.... have you found out what that error code is

Robert

Posted on Jan 29, 2009

Ad
  • 2 Answers

SOURCE: Error light is "Orange On"

I did return to the Dell Spare Parts section and connect to someone via their Chat service. Although (at 45 minutes) the chat process took about twice as long as I expected, in the end they did have the DT574, Print Head Device which I ordered at $116 plus tax and shipping. This was less than the $168 I found at two independent web sites. I am assuming they are sending me the correct item for the printer. If not, I will follow up on this posting to let everyone know.

Posted on Jun 11, 2009

  • 1 Answer

SOURCE: Error Code 004-332

I tried this solution but wasn't quite sure how it's possible.
"Pull out the drum. Open the front door. Then close back this door then at the same time, move
the carousel around back or forth. The carousel now is able to be free to rotate. During rotating
you try to pull out the catridge. If it is locked, then adjust it to the position to be free."

Instead i pulled out the drum unit and pushed down with a bit of force on the toner carousel. I heard the gears grind which didn't sound real pleasant but the error went away. Instead I received an error message this time to remove and reseat the Cyan toner. Tried this multiple times w/o luck so i replaced the Cyan toner and it freed it up. Now I'm getting a paper jam message but there is no jam. Stuck again but making progress...

Posted on Jun 24, 2009

RyanFanMan
  • 342 Answers

SOURCE: I have a Dell 2135

is the contrast up all the way? to do that go into the settings of the printer and make sure that the black contrast is up all the way first the if not then there is a control issue with that printer

Posted on Mar 04, 2011

  • 51 Answers

SOURCE: The printer keeps saying to

I believe the PHD is also called the Imaging Drum. You'll need to buy a new one to replace.

You can find them at Dell's official site:

http://accessories.us.dell.com/sna/productdetail.aspx?c=us&l=en&s=dhs&cs=19&sku=330-1435

Posted on Mar 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error code 007 340


Hello!

This issue relates to an error with the PHD (Photoconductive) Unit. To resolve this error please try the following steps:

1. Turn the printer off.

2. Wait 10 seconds.

3. Turn the printer on.

4. Determine if the issue still occurs.

5. If 007-340 or 007-341 Restart Printer Error recurs please remove the PHD Unit and remove any packaging.

To Remove PHD Unit:-> Remove the Paper Tray

-> Open the front cover.

-> Put a piece of paper on the transfer belt to protect it from scratches and from light damage. Do not cover the left and right of the belt guards with the paper.

-> Rotate the four stoppers of the PHD counter-clockwise 90 degrees to release the locks



-> Remove the PHD unit toward you by pulling it by the left and right handles.

-> Lift up the PHD unit from the printer. Be careful to avoid scratching the transfer belt.

-> Remove the packing tape by pulling straight out


Reinsert the PHD.

-> Close the front cover.


6. If error recurs with the PHD Unit re-seated please try another PHD from a working 2130CN Laser Printer (if available).

7. If issue recurs after trying another PHD or no PHD Unit is available, please call Dell Technical Support to advise.

Oct 28, 2013 | Office Equipment & Supplies

1 Answer

Printer screen says to replace phd. what is phd?


PHD = Printer Head Device

It seems you need a new printer head.

More info. can be found here: http://support.dell.com/support/edocs/systems/prn2130cn/en/ug/sectiogd.htm#wp1189135



Hope that helps you ;)

Please Take a second to rate me! Thank You.

Apr 14, 2011 | Dell 2130cn Laser Printer

1 Answer

I have a Dell 2135 cn that is currently printing word docs in grey instead of black. Some PDF files print in a bluish black. How can I get them all to print in true black?


is the contrast up all the way? to do that go into the settings of the printer and make sure that the black contrast is up all the way first the if not then there is a control issue with that printer

Mar 04, 2011 | Dell 2135cn All-In-One Laser Printer

2 Answers

My Dell 1320c Colour Laser Printer prints black as grey. How can I get it to print black?


If you have an extra black toner cartridge, try installing that and see if it fixes the problem. If it doesn't make sure Toner Save Mode is off (in the print driver, under Preferences). If your copies still come out gray instead of black, you may need to replace the Print Head Unit (PHD).

Feb 21, 2011 | Dell 1320c Laser Printer

1 Answer

Printer says-replace PHD now- what does that mean?


Hi, The PHD unit is either missing or not fully inserted into the printer. Reinsert the PHD unit. See "Replacing the Print Head Device" in your printer manual.
thanks
Adam
please leave my feedback

Feb 18, 2011 | Dell 2135cn All-In-One Laser Printer

1 Answer

Asking to replace phd?


Hi,
The PHD unit is either missing or not fully inserted into the printer.

Reinsert the PHD unit.

See "Replacing the Print Head Device" in your printer manual.

thanks

Adam
please leave my feedback

Jan 19, 2011 | Dell 2135cn All-In-One Laser Printer

1 Answer

Dell 1320C


On page 30 of the 1320c manual it says this signifies the coming end of the PHD (print head device). I cannot find a part number or reference to the PHD on the Dell web site pages connected with this printer

Jan 30, 2009 | Dell 1320c Laser Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

348 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...