Question about Televison & Video

1 Answer

LTV-19W3 hi james, i need to reset my parental control on this tv. you suggeted this code to another person. where would you input this code? if you just hit 2882 it will just change the channel. under what screen would you do it? or do you have any other suggestions? westinghouse customer support says that once the parental control is set if you forget the code there is no way to reset it. i find that hard to believe, any help would be greatly appreciated. i bought this tv refurbished and the code was already set and i can't return it. thanks,kevin "use the remote and reset the tv to the factory setting if I remember correctly its 2882 on the remote you might look it up in your manual to make sure"

Posted by on

  • bud914 Jul 23, 2008

    hey james, were you able to figure out anything on this westinghouse? thanks,kevin

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 362 Answers

I will have to look the code up again i might have remembered it wrong give me a few hours to locate it thank you james it will reset the tv back to factory settings with no codes in the set, then you can set them your self.

Posted on Jul 13, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

'no signal input'


D-Sub is usually used for input from a computer, make sure the TV's input source is set to Analogue or Digital (or DTV) as it seems to be set to accept input from a computer, if you do not have a computer connected, then this is why it is complaining of no signal. It will not automatically defer to normal TV without being told to do so, have a look in the manual, or guess around the remote control to change the source of the signal.

Sep 14, 2007 | Westinghouse LTV-19W3 19 in. LCD...

1 Answer

Where can I find a store in Las Vegas to purchase Remote Control for LTV-19w3


You can buy it from most of the electronics spare part selling shops. Buy one universal remote control, which have setup codes for Westinghouse Brand TVs. You can get this detail for its attached code list.

Jun 23, 2012 | Westinghouse LTV-19W3 19 in. LCD...

1 Answer

Westinghouse LTV-19w3: Blue power light is on in the front, but no picture, even the menu wont come up, its just blank.


My TV is doing the exact same thing... were you able to find a solution? If so could you let me know?

Thanks
Mark

Jul 17, 2009 | Westinghouse LTV-19W3 19 in. LCD...

1 Answer

Reset Parental Control


There you go:
1) Hit [MENU]. Press [CH up / down] to select ?V-CHIP SET UP?, then hit [VOL up].
2) Enter 4-digit access code with the Number buttons. If you have not set up your personal access code, enter 0000 (default access code).

Jan 09, 2009 | Emerson EWF2004 20" TV

1 Answer

Parental Control Lock password Spectra KT2313


default passwords are often 1234 or all zeros that would be a good starting point

Sep 08, 2017 | Spectra KT2313 Combo

1 Answer

Westinghouse ltv-19w6 source won't change


Have you tried to click the source button on the tv? It is the second button from the bottom on the right hand side of the screen.

I doubt your tv/monitor is turning off, it just isn't getting any input. D-Sub is the "pc monitor part".

Try clicking that button, give it sec, the hit it again. It will go through all of it inputs. If TV is what you are trying to find, it is directly after the Video input (green letters, top right hand side of the screen.) Keep hitting the button until TV shows up.

Good Luck!

Oct 23, 2007 | Westinghouse LTV-19W3 19 in. LCD...

2 Answers

Tv source


pull the back off the tv and plug in the cable for the input board. Its either not seated or came lose

Oct 02, 2007 | Westinghouse LTV-19W3 19 in. LCD...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

250 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5337 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...