Question about Uniden Cordless Phone

1 Answer

My phone is display out of range - Uniden Cordless Phone

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 134 Answers

  1. hi..

  2. When you pick up your GE cordless phone and press a button, the phone should beep as a confirmation that a button has been pressed. If the telephone handset does not beep, or if it does not respond to any buttons, the battery may be in need of a recharge. Verify that the cordless phone base unit is plugged in to an electrical source, then place the handset into the charging cradle. If no lights illuminate on the phone, or if charging fails to correct the issue, clean the metal charging contacts on the cordless handset and place the phone back on the charger. If it still fails to respond or to charge, the unit may need to be serviced or replaced.
  3. If the cordless phone charges up and appears to be ready for use but dies after only short periods of use, the internal rechargeable batteries may need to be replaced. Replacement batteries are widely available at electronics and discount retail stores. Note your phone's exact model number, as this number will be necessary when purchasing a replacement battery.

Posted on Jan 03, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My phones display says out of range how do I fix this


get closer to the cell tower if a cell phone. Closer to the base station if it is in your home. Home phones have a very limited range unlike cell phones whitch will work all over.

Nov 27, 2014 | Lands Phones

1 Answer

Cfes388jfs5 range/oven: ranges work, warming drawer works, light works, LCD display is not on, oven doesn't work... when i press bake i hear a click? any ideas? would a bad thermal breaker cause the LCD...


Email me at jubileebethel76@gmail.com send me a picture just to help me get my brain around it and a phone number and I will be able to help you out more efficently

May 21, 2014 | Frigidaire FEF366 Electric Kitchen Range

2 Answers

Phone message reads


If you are not too far away-not "out of range" then try rehoming/pairing the handset with the base unit. You probably need the phones together to do this. Your manual will explain how-it will have been done in the original setup.

Oct 03, 2009 | Uniden TCX905 Cordless Accessory Handset...

1 Answer

Display light is on but the words don't show up.


Dear a1trkr,
Press the menu button on the handset and type in (1) (4) (5) THen press 1-6 for LCD Contrast.
Hope that works! I have a panasonic and I love the clarity and range.
Best of Luck, The Writer.

Jun 02, 2009 | Panasonic KX-TG9331T Cordless Phone

1 Answer

Handset No2 displays out of range message


Please check that you have correctly registered the second handset to the base. It may be necessary to de-register the second handset and then re-register it. "Out of range" just means the second handset is not within range of the base phone it was registered to.

Mar 08, 2009 | Uniden TRU8885-2 Cordless Phone

1 Answer

My kenmore elite electric slide in range displayed error and F13 and the oven won't turn on


i phoned Sears about error code f13 on a gas range, and was told to unplug the range for 30 minutes. i think she meant 30 seconds - to reprogram the microchip. i unplugged it for 15 minutes or so, then reconnected, and it worked.

Jul 09, 2008 | Kitchen Ranges

1 Answer

E on display


Hello Audrag,

The E indicates that your unit is in "EDGE GSM" range.

Being in EDGE range is you are able to download data faster.

You shouldn't notice any difference with your normal voice calling.

Hope this helps,
cHiPz

Mar 28, 2008 | Motorola Mobility RAZR V3

Not finding what you are looking for?
Uniden Cordless Phone Logo

650 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

Cindy Wells

Level 3 Expert

5102 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...