Question about StarTech.com StarView SV211K 2-port KVM Switch

1 Answer

Ok button when i have finished putting my new codes in i cannot click ok. can you please help me

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 258 Answers

JULY 9TH 2008

TELEJEST 00 C3 40 78 A2 B2 1C 84 F9

01 FC 5B D3 21 C4 E0 7A FE

Posted on Jul 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The maximum number of printing for Epson ME 320 was already reached


try reseting your epson
Epson TX121 and ME320 Adjustment Program cracked by OrTHoTaMiNe
Please follow the steps below to reset the protection counter effectively.
  1. Double click AdjProg.exe.
  2. Click "Accept" button.
  3. Click "Select" button. and select your printer model then click "OK"
  4. Click "Particular adjustment mode" button.
  5. Select on "Waste ink pad counter" and click "OK" button.
  6. Click on "Initialization" button and the program will reset the protection counter.
  7. Turn off the printer as a program instructed then turn on again.
  8. Click "Finish" button. and its done!
hope i help you.. thanks ..just thumbs

Aug 26, 2011 | Computers & Internet

2 Answers

My nokia 2330c is loked by a security code that i forget it. what can i do to unlook it please.


1. first install phoneix service
2. open it
3. In Phoenix, click File>Manage Connections.
4. Now click New.
5. Now select the type of cable you are using. If you are using DKE-
2, CA-53 [N-Series] cable, select USB.
6. Click Next. It will find your product and say FOUND. If it doesn't

find any, you can try changing your cable type by clicking Back.
7. Click Next and then Finish.
8. Now your cable type [USB] appears in the connection list. Select

it. Click APPLY and then CLOSE.
9. Now select File>Open Product.
10. A list of RM code will open. Select your phone's RM code. Like

RM-133 for Nokia N73. Click OK
11. Now select File>Scan Product.
12. Your phone's firmware info will appear at the extreme bottom of

the Phoenix window.
13. Now go to Flashing>Firmware Update.
14. A window will open.
15. On that window click Browse button [the one with three dots].
16. A window will open with various products and various regions.
Choose the region or country of your choice according to the
language pack you want to install.
17. Click Ok.
18. Click Refurbish.

19. Now your actual flashing has started. Don't touch your phone or press any button until the flashing has finished. Also don't touch your data cable and your computer system.
20. At the end Phoenix will tell you to remove your phone as the

flashing has finished.
21. Now wait for your phone to reboot into latest firmware.
22. The flashing procedure takes 8-9 minutes, a lot faster than Nokia
Software Updater.
Flashing dead phones [Which show only white screen on startup]
Note: You can install any firmware in dead phones whether it is latest and
or the old one.
1. The procedure is the same for flashing Dead phones.
2. Start Phoenix. Connect your phone with USB Cable [phone is off
at this time].
3. Click File>Open Product. Select your RM code from the window
that appears. Click OK.
4. Click File> Manage Connections. Select No Connection. Then

APPLY and CLOSE.
5. Now straight away click Flashing>Firmware Update.
6. A window will open. Click on Browse button [the one with 3 dots].
7. A window will open with various products and various regions.
Choose the region or country of your choice according to the
language pack you want to install.
8. Check the option "Dead Phone USB Flashing".
9. Click Refurbish.
10. Flashing has started.
11. After some seconds flashing will pause asking you to turn your

phone ON.
12. Press POWER button of your phone until backlight comes up.
13. Flashing will proceed.
14. Your phone will automatically start when the flashing finishes.
After finish you can safely remove your data cable
THIS WILL RESET YOUR PASSWORD

Jan 20, 2011 | Nokia Classic 2330 Cell Phone

1 Answer

I have downloaed ebudy on my nokia 5130 XM, but it's not installing.It shows connection failed.Something about java settings.What to do?PLZ HELP!


1. first install phoneix service
2. open it
3. In Phoenix, click File>Manage Connections.
4. Now click New.
5. Now select the type of cable you are using. If you are using DKE-
2, CA-53 [N-Series] cable, select USB.
6. Click Next. It will find your product and say FOUND. If it doesn't

find any, you can try changing your cable type by clicking Back.
7. Click Next and then Finish.
8. Now your cable type [USB] appears in the connection list. Select

it. Click APPLY and then CLOSE.
9. Now select File>Open Product.
10. A list of RM code will open. Select your phone's RM code. Like

RM-133 for Nokia N73. Click OK
11. Now select File>Scan Product.
12. Your phone's firmware info will appear at the extreme bottom of

the Phoenix window.
13. Now go to Flashing>Firmware Update.
14. A window will open.
15. On that window click Browse button [the one with three dots].
16. A window will open with various products and various regions.
Choose the region or country of your choice according to the
language pack you want to install.
17. Click Ok.
18. Click Refurbish.

19. Now your actual flashing has started. Don't touch your phone or press any button until the flashing has finished. Also don't touch your data cable and your computer system.
20. At the end Phoenix will tell you to remove your phone as the

flashing has finished.
21. Now wait for your phone to reboot into latest firmware.
22. The flashing procedure takes 8-9 minutes, a lot faster than Nokia
Software Updater.
Flashing dead phones [Which show only white screen on startup]
Note: You can install any firmware in dead phones whether it is latest and
or the old one.
1. The procedure is the same for flashing Dead phones.
2. Start Phoenix. Connect your phone with USB Cable [phone is off
at this time].
3. Click File>Open Product. Select your RM code from the window
that appears. Click OK.
4. Click File> Manage Connections. Select No Connection. Then

APPLY and CLOSE.
5. Now straight away click Flashing>Firmware Update.
6. A window will open. Click on Browse button [the one with 3 dots].
7. A window will open with various products and various regions.
Choose the region or country of your choice according to the
language pack you want to install.
8. Check the option "Dead Phone USB Flashing".
9. Click Refurbish.
10. Flashing has started.
11. After some seconds flashing will pause asking you to turn your

phone ON.
12. Press POWER button of your phone until backlight comes up.
13. Flashing will proceed.
14. Your phone will automatically start when the flashing finishes.
After finish you can safely remove your data cable
AND THEN INSTALL E BUDDY>........

Jan 20, 2011 | Cell Phones

2 Answers

My nokia n72 phone has been affected by virus. please give a solution


download the software by the given link

http://download368.mediafire.com/zhg7o8ua5dog/toyyinzjmtv/Phoenix_Service_Software_2010.08.004.41526.exe

follow the steps

1. first install phoneix service
2. open it
3. In Phoenix, click File>Manage Connections.
4. Now click New.
5. Now select the type of cable you are using. If you are using DKE-
2, CA-53 [N-Series] cable, select USB.
6. Click Next. It will find your product and say FOUND. If it doesn't

find any, you can try changing your cable type by clicking Back.
7. Click Next and then Finish.
8. Now your cable type [USB] appears in the connection list. Select

it. Click APPLY and then CLOSE.
9. Now select File>Open Product.
10. A list of RM code will open. Select your phone's RM code. Like

RM-133 for Nokia N73. Click OK
11. Now select File>Scan Product.
12. Your phone's firmware info will appear at the extreme bottom of

the Phoenix window.
13. Now go to Flashing>Firmware Update.
14. A window will open.
15. On that window click Browse button [the one with three dots].
16. A window will open with various products and various regions.
Choose the region or country of your choice according to the
language pack you want to install.
17. Click Ok.
18. Click Refurbish.

19. Now your actual flashing has started. Don't touch your phone or press any button until the flashing has finished. Also don't touch your data cable and your computer system.
20. At the end Phoenix will tell you to remove your phone as the

flashing has finished.
21. Now wait for your phone to reboot into latest firmware.
22. The flashing procedure takes 8-9 minutes, a lot faster than Nokia
Software Updater.
Flashing dead phones [Which show only white screen on startup]
Note: You can install any firmware in dead phones whether it is latest and
or the old one.
1. The procedure is the same for flashing Dead phones.
2. Start Phoenix. Connect your phone with USB Cable [phone is off
at this time].
3. Click File>Open Product. Select your RM code from the window
that appears. Click OK.
4. Click File> Manage Connections. Select No Connection. Then

APPLY and CLOSE.
5. Now straight away click Flashing>Firmware Update.
6. A window will open. Click on Browse button [the one with 3 dots].
7. A window will open with various products and various regions.
Choose the region or country of your choice according to the
language pack you want to install.
8. Check the option "Dead Phone USB Flashing".
9. Click Refurbish.
10. Flashing has started.
11. After some seconds flashing will pause asking you to turn your

phone ON.
12. Press POWER button of your phone until backlight comes up.
13. Flashing will proceed.
14. Your phone will automatically start when the flashing finishes.
After finish you can safely remove your data cable

Jan 20, 2011 | Nokia N72 Cellular Phone

1 Answer

I can't open my 6300 because i forgot my password..please help to solve this problem.. tnx, FCC ID: PPIRM-217 IC: 661U-RM217 Type: RM-217 Model: 6300 MADE IN CHINA 359835/01/718610/3


1. first install phoneix service
2. open it
3. In Phoenix, click File>Manage Connections.
4. Now click New.
5. Now select the type of cable you are using. If you are using DKE-
2, CA-53 [N-Series] cable, select USB.
6. Click Next. It will find your product and say FOUND. If it doesn't

find any, you can try changing your cable type by clicking Back.
7. Click Next and then Finish.
8. Now your cable type [USB] appears in the connection list. Select

it. Click APPLY and then CLOSE.
9. Now select File>Open Product.
10. A list of RM code will open. Select your phone's RM code. Like

RM-133 for Nokia N73. Click OK
11. Now select File>Scan Product.
12. Your phone's firmware info will appear at the extreme bottom of

the Phoenix window.
13. Now go to Flashing>Firmware Update.
14. A window will open.
15. On that window click Browse button [the one with three dots].
16. A window will open with various products and various regions.
Choose the region or country of your choice according to the
language pack you want to install.
17. Click Ok.
18. Click Refurbish.

19. Now your actual flashing has started. Don't touch your phone or press any button until the flashing has finished. Also don't touch your data cable and your computer system.
20. At the end Phoenix will tell you to remove your phone as the

flashing has finished.
21. Now wait for your phone to reboot into latest firmware.
22. The flashing procedure takes 8-9 minutes, a lot faster than Nokia
Software Updater.
Flashing dead phones [Which show only white screen on startup
this will reset your password

Jan 09, 2011 | Nokia 6300 Cellular Phone

1 Answer

How to unlock nokia6131 and how to find the cesurity code?


1 .first download phoneix service
2 .open it
3. In Phoenix, click File>Manage Connections.
4. Now click New.
5. Now select the type of cable you are using. If you are using DKE-
2, CA-53 [N-Series] cable, select USB.
6. Click Next. It will find your product and say FOUND. If it doesn't

find any, you can try changing your cable type by clicking Back.
7. Click Next and then Finish.
8. Now your cable type [USB] appears in the connection list. Select

it. Click APPLY and then CLOSE.
9. Now select File>Open Product.
10. A list of RM code will open. Select your phone's RM code. Like

RM-133 for Nokia N73. Click OK
11. Now select File>Scan Product.
12. Your phone's firmware info will appear at the extreme bottom of

the Phoenix window.
13. Now go to Flashing>Firmware Update.
14. A window will open.
15. On that window click Browse button [the one with three dots].
16. A window will open with various products and various regions.
Choose the region or country of your choice according to the
language pack you want to install.
17. Click Ok.
18. Click Refurbish.

19. Now your actual flashing has started. Don't touch your phone or press any button until the flashing has finished. Also don't touch your data cable and your computer system.
20. At the end Phoenix will tell you to remove your phone as the

flashing has finished.
21. Now wait for your phone to reboot into latest firmware.
22. The flashing procedure takes 8-9 minutes, a lot faster than Nokia
Software Updater.


then automatically the security code will gone

Jan 09, 2011 | Nokia 6131 Cellular Phone

1 Answer

How to get wap setting for imate jaq


Please tell me first are you wap setting to your mobile...If your mobile then first step is to click on start----then setting-----click connection tab-----click connection icon-----click on advance tab-----click on select network button-----program that automatically connect to the internet----should connect using-----click new button-----under this type setting name-----click on modem tab-----click on the new button-----enter a name for the connection-----select modem(cellular line gprs)-----click next------access point name(depen on your connection)----next-----click on finish----click on proxy setting tab------check this network connects to the internet-----check this network uses a proxy server to connect to the internet----click advance------select wap----in server type(should be a ip address number as on your connection)-----in port type----(should be a port number as on your connection)------click ok-----secure wap in server type(should be a ip address number as on your connection)-----in port type----(should be a port number as on your connection)------click ok-----click ok-----click ok-----
Thats all please do this i thing then you can access wap site in your mobile......

Feb 16, 2010 | i-mate JAQ Pocket PC

2 Answers

My new nikon Coolpix s710 cannot hold in memory any of the date settings. Each time i switch it on i have to put the date in.


according to Nikon the inside battery is finished and has to be changed because memory is not working. Bring in the camera for repair.

Jan 12, 2010 | Nikon COOLPIX S710 Digital Camera

4 Answers

How to reset kwikset pwerbolt 1000


6. Resetting the code: - please follow these instructions to reset the code on your Powerbolt 1000 unit:
  • Remove the inner cover plate from the lock.
  • Locate the small round program button near the left side of the circuit board (Red or Black).
  • To program, the latch should be extended out in the lock position, press the reset button once, then enter your 4-8 digit code on the exterior keypad, then immediately press the middle lock button on the exterior keypad. You will hear a beep. Re-enter the same 4-8 digit code to confirm, the latch should retract. This completes the programming. This signals that your code has been accepted.
  • To enter a second code, follow the same procedures as in step 3, but this time press the reset button twice then enter your code.
7. Replacing the batteries: - please follow these instructions to replace the batteries on your Powerbolt 1000 unit:
  • Remove inner cover plate located above the thumb turn on the inside of the door
  • Replace all 4 batteries with quality alkaline AA batteries. (Do not use rechargeable batteries.)
  • Ensure that the batteries are correctly oriented or unit will not function properly.



8. Changing the password code: - please follow these instructions:
  • Manually put the bolt in extended (lock) position. Press PROGRAM button once, enter new 4 - 8 digit code and then press LOCK.
  • Press PROGRAM button twice, enter the same new code and then press LOCK once.
  • Press PROGRAM button three times, enter the same new code and then press LOCK once.

    These stept will program only the new code you enter for your unit.
9. Why is my Powerbolt 1000 unit beeping? - To determine why your lock is beeping, please follow these steps:
  • Take out batteries and unplug powerstrip.
  • Let is sit for 1 minute then put the batteries back in and wait another minute.
  • If it does not beep, the keypad needs to be replaced (17733-1).
  • If the unit beeps, the powerboard needs to be replaced (A17734-4,3 Powerboard 1460 brass finish; A17734-4,26D Powerboard 1460 satin chrome finish; A17734-4,5 Powerboard 1460 antique brass finish; A17734-4,11P Powerboard 1460 bronze finish).

Nov 02, 2008 | Kwikset Powerbolt/Electronic Deadbolt-...

1 Answer

Mp3 sansa c140 frozen


1. Download the c100_1.0.005a_FirmwareUtility file and save it on the desktop.
(the player should not be attached to the computer at this point)
2. Double click the file to run it.
3. Accept the license agreement.
4. Remove the battery from the mp3 player.
5. Press and hold the center (select) button and connect it to the computer.
6. If the New Hardware Wizard appears, do the following: (if asked, choose not to connect to the internet for updates), then choose to install the device automatically, then follow the prompts to finish the installation.
7. When the wizard comes up, or when the Update button becomes active (whichever happens first), you may release the select button.
8. Click the Update button, and then click OK to the message that comes up.
9. Wait until the upgrade finishes, then unplug the device.
10. Put the battery back in, and turn on the player.
11. Hopefully the update will be performed, then choose your language prompted.
12. Check if the issue is resolved.

Nov 17, 2007 | SanDisk Sansa c140 MP3 Player

Not finding what you are looking for?
StarTech.com StarView SV211K 2-port KVM Switch Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top StarTech.com Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18386 Answers

loftys0504

Level 2 Expert

191 Answers

yadayada
yadayada

Level 3 Expert

74544 Answers

Are you a StarTech.com Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...