Hi who can i erase old playlist from my numark idj2

Hi arun runin, Just review the setup maybe there is something you miss,and also the setting and go this link http://www.numark.com/idj2
Regards: VOTIT

Use librarian

Not needed

www.numark.com/idj2 for all the things you need

it maybe due to protected files. some songs (files) are classified protected.. this very frustrating problem is the birth child of .... you guessed it ...apple. eg i have 2250 files on my ipod but can only play around 1900 on the idj2. i hope this helps

all i did was go to the numark librarian and used the advanced option

Which iPod model are you using? Not all iPod models support video with the iDJ2. Check the iPod compatibility matrix document at www.numark.com/idj2 to see if your model is supported.

If it is a 2nd Generation iPod Touch it is not supported for use with the idj2. Look at http://www.numark.com/idj2 and review the iPod Compatibility Matrix for further info.

The current firmware available is version v1.13 which is located at http://www.numark.com/idj2 . It also has Librarian v1.5 included with it.

Download the firmware to your PC and then unzip it to your desktop where you can retrieve it easily.

Transfer the firmware file to the handy little 128mb thumb drive that came with the idj2. (I moved all of the files from the thumb drive on to my PC so the firmware file was the only file on my thumb drive to avoid any computer related confusion)

Making sure your idj2 is powered "OFF" insert the thumb drive containing firmware v1.13 into one of the rear USB ports. Make sure this is the only thing plugged into the idj2 at this time(no keyboard, ect)

Turn on the idj2 on. You will see a message that says the machine is checking the firmware.(I don't have the system in front of me right now but that is roughly what it says) It will take a few minutes and the system will update to the new firmware.

I had the same problem. Look at the documentation site of Numark

Ipod touch isn't supported for mixing (1st gen is supported for Direct play)

Source:
http://www.numark.com/stuff/contentmgr/files/2/dd1ffd47d0ee2aec5d8ef3afa92e0992/file/ipod_compatibility_numark_v1.6.pdf

Hi,
not sure what it can be, but if you used librarian before, be sure that you are running librarian 1.50 with fw 1.09(a). If you have created a library with 1,33, then you have to create the library again with the 1.50 version. Don't use USB powered drives. Mostly they overload the USB port, with al sorts of weird problems. If you have one of these, use an USB powered hub to remove the load of the IDJ2 port. You could test with an USB stick, for a few hours..

regards,
Jack.