Question about Uniden BC340CRS Base Scanner

1 Answer

Hi I just purchased auniden bc340crs and am having problem to program it I press the pgm key to find the chanel I want to put the frequency I want but the chanel stay on the waether chanel how can I get it off the weather and find the chanel I need to set me frequencies

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,761 Answers

Make sure that the slide switch marked MODE is in the far right (Scanner) position before you start programming. If you need the manual for your scanner, you can download and print it, at no cost, here:
http://www.uniden.com/pdf/BC340CRSom.pdf

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:
www.RadioReference.com

Bill B.
Listening in since the 60's

Posted on Jan 04, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to program a pro - 135200 channel hand held scanner with out charging me .


  1. 1. Press "MAN."
  2. 2. Press "ENT/PGM" to put the scanner in programming mode. You will see PGM appears.
  3. 3. Use the number keys to enter both the channel storage bank and the channel number you want to assign to a frequency.
  4. 4. Press "MAN."
  5. 5. Use the number keys to enter the frequency and don't forget decimal point.
  6. 6. Press "ENT/PGM" to store the frequency into the channel.
  7. 7. you just stored a frequency into a channel. Repeat steps above until you have your scanner programmed how you want.
  • Hope this helps...

Nov 26, 2011 | Radio Communications

1 Answer

How do i program a pro-135 200 channel hand held scanner from radio shack


  1. 1. Press "MAN."
  2. 2. Press "ENT/PGM" to put the scanner in programming mode. You will see PGM appears.
  3. 3. Use the number keys to enter both the channel storage bank and the channel number you want to assign to a frequency.
  4. 4. Press "MAN."
  5. 5. Use the number keys to enter the frequency and don't forget decimal point.
  6. 6. Press "ENT/PGM" to store the frequency into the channel.
  7. 7. you just stored a frequency into a channel. Repeat steps above until you have your scanner programmed how you want.
  • Hope this helps.

Nov 26, 2011 | Radio Shack Radio Communications

1 Answer

I basically just want to use it for Police & Fire/EMS, I can get it to scan, but when it stops, theres no words. If I understand the owners manual correctly, it is already programmed for it, so I...


Hello daveliz,
Welcome to FixYa.
My name is John, and I will be assisting you with your issue today.
Your UNIT needs to be PROGRAMED. Here is how to do it. Just follow instructions.
Step#1. Press the E/PGM button.
Step#2. Enter the frequency you want. You can get them here www.RadioReference.com .
Step#3. Press E/PGM.
Press the arrow up or down if you want to program another frequency in it.
To exit press HOLD or SCAN.
I hope this was helpful to you and your Comments and Testimony,s are always welcomed here.
Thanks for choosing FixYa.

Feb 22, 2011 | Uniden BC340CRS Base Scanner

1 Answer

How do you progam freguencies into my scanner


To program a known frequency into your scanner:
- Power the scanner ON
- Press the E/PGM key
- Enter the number of the channel to be programmed
- Press HOLD
- Enter the frequency, including decimal point
- Press E/PGM to store the data in the scanner's memory

To continue programming, press the up or down arrow to advance to the next channel.

Press HOLD or SCAN to exit the programming mode.

More detailed programming instructions are in the factory operating manual which you can download and print, at no cost, here:
http://www.radiopics.com/1.%20Manuals/Bearcat/Bearcat%20BC340CRS%20%28Manual%29.pdf

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:
www.RadioReference.com

Bill B.
Listening in since the 60's

Nov 14, 2010 | Uniden BC340CRS Base Scanner

1 Answer

Please help us program a Uniden BC340CRS scanner.


To program a known frequency into the BC340CRS:
- Power the scanner ON
- Press the E/PGM key to enter programming mode
- Enter the number of the channel that you wish to program
- Press HOLD
- Enter the frequency, including the decimal point (e.g., 156.225)
- Press E/PGM to enter the frequency into memory

Press the UP or DOWN arrow to advance to the next channel you wish to program

Press HOLD or SCAN to exit the programming mode.

More detailed programming instructions can be found in the factory operating manual which you can download and print, free of charge, here:

http://www.radiopics.com/1.%20Manuals/Bearcat/Bearcat%20BC340CRS%20%28Manual%29.pdf

For a comprehensive database of active frequencies in your area, visit:

www.RadioReference.com

Bill B.
Listening in since the 60's

Oct 23, 2010 | Uniden BC340CRS Base Scanner

1 Answer

Wont pick up any frequencies


Hi, my name is John. Try to program some frequency,s in it. Get them here. <a href="http://www.RadioFreq.com">www.RadioFreq.com</a> or <a href="http://www.RadioReference.com">www.RadioReference.com</a> ...instructions are #1. Press the E/PGM button. #2. Enter the frequency you want. Press the E/PGM button. #3. To program frequency, press the up- down arrow. #4. To exit, press the HOLD or SCAN button...... hope this was helpful....

Aug 27, 2010 | Uniden BC340CRS Base Scanner

1 Answer

I want to know what the mega hearts nos are for the town of zimmerman is so i can program my scanner in or the frequencies are for my scanner


You can get you frequency you want at www.RadioReference.com ...To program.. Press E/PGM, enter the channel you want, enter the frequency you want including the decimal point, then E/PGM, then SCAN....hope this helps...

May 28, 2010 | Uniden BC340CRS Base Scanner

1 Answer

How do you set up the scanner to scan police and ems channels


First you'll need a list of frequencies to program. For a comprehensive database of active frequencies in your area, visit:

www.RadioReference.com

Once you've selected your frequencies, power the scanner ON and

1. Press E/PGM to enter the program mode (the scanner turns on the
PGM icon).

2. If the current channel is not the one you want to program, enter the
memory number then press HOLD.

3. Enter the frequency including the decimal point, then press E/PGM.

4. To program the next memory, press  or  and repeat step 3. To
program a different memory, repeat from step 2.

5. To exit program mode, press HOLD or SCAN or change the scanner’s mode.

Notes:
• Any frequency you program replaces the previous memory contents.
• If you enter a frequency you have already stored in a different
memory in Step 3, the scanner beeps and displays the channel
where you have previously stored the frequency. If you want to store
the frequency anyway, press E/PGM a second time in Step 3.
• To clear the contents of a memory, enter “0” in Step 3.
• Channels you program are automatically unlocked (see
“Locking/Unlocking Memories) and have Delay turned on (See
“Setting Channel Delay”).

If you would like to download/print the operating manual for you scanner, visit:

http://uniden.com/pdf/BC340CRSom.pdf

BillB

Jan 11, 2010 | Uniden BC340CRS Base Scanner

1 Answer

HELP


If the weather band is working, the scanner should be working. To verify operation:

- Move the MODE switch to "Scanner" and power the unit ON.
- Press the SVC button (chrome button below display).
- Press POL (chrome button below display).
- Turn the SQUELCH knob towards the left until scanning stops and you hear a hissing noise.
- Turn the SQUELCH knob towards the right slowly until scanning resumes.

If the scanner stops on anything - even noise, it's working.

To Program:

- Slide the MODE key to "Scanner."
- Power the unit ON
- Turn the SQUELCH knob to the left until you hear a hissing noise, then turn it the right - slowly - until scanning resumes.
- Press HOLD.
- Press E (PGM).
- Press 0, 1.
- Press HOLD.
- Enter your first frequency, including the decimal point (EX: 156.055).
- Press the E (PGM) key.
- Press the UP arrow (above the SCAN key). Scanner will move to channel 02.
- Enter your second frequency, including the decimal point.
- Press the E (PGM) key.

You should now have two frequencies programmed. Press the SCAN key . . .

If it still will not accept programming, let me know.

BillB

Nov 07, 2009 | Uniden BC340CRS Base Scanner

1 Answer

HOW DO YOU PROGRAM A UNIDEN SCANNER, JUST PURCHASE IT. BUT DON;T UNDERSTAND HOW TO PROGRAM IT. CANNOT SET UP CLOCK CAN NOT PROGRAM CHANELS.


There is no clock function on the BC92XLT. To program a frequency, power the scanner ON, then press HOLD to stop scanning. Next, enter the channel number that you wish to program (01, 02, etc.). Push FUNC, then PGM, then enter the frequency you wish to program, including the decimal point (example, 156.075). Press the E key to complete the entry.

For an extensive database of active frequencies and systems in your area, visit
www.RadioRefernece.com
or
www.CityFreq.com

Oct 25, 2009 | Uniden BC92XLT Handheld Scanner

Not finding what you are looking for?
Uniden BC340CRS Base Scanner Logo

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Radio Communications Experts

Jason

Level 2 Expert

211 Answers

John
John

Level 2 Expert

509 Answers

AnyMHz.com
AnyMHz.com

Level 2 Expert

500 Answers

Are you an Uniden Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...