Question about Logitech Harmony 1000 LCD Touchscreen Remote Control

3 Answers

Harmony 1000 Remote

Remote will not power up, will not charge, and is non functional. Is there anywhere I can get a repair estimate???

Posted by on

  • 2 more comments 
  • jjjacksons20 Feb 17, 2009

    My Harmony 1000 will not turn on at all and battery will not charge although the light is on. The screen is blank.

  • shanigans Mar 02, 2009

    my harmony 1000 will either, do as the first question, or will power on with a permant white screen, or will power all the way on, but will freeze when clicked. when fully powered on, the screen will distort when held on the lower part of it (the silver part near the activities button) and then freeze. Left unpluged and with battery out for a night, and then charged for a night as well, but to no avail.

  • Anonymous Apr 30, 2009

    Nothing happen after charging for an hour. The only signs of life is that the activty button is flashing a few times when i put in the battery. Is the remote broken?

  • Anonymous May 21, 2009

    remote does absolutely nothin except flash activity light button when i remove & replace battery

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Had the same problem.

My solution was.

  1. Boot remote into safe mode (Insert battery whilst holding down the power button)
  2. Update firmware from Logitech.
  3. Now this is the painful bit.... It will get to abou 42% then it will reboot. You wiil need to press and hols the power button down as soon as the screen goes blank. You will need to do this again at around 60%. If you select show details when updating the firmware you will see it say 'Rebooting remote'.
  4. Follow the remaining prompts.

Hope this helps.

Cheers

Jacko

Posted on Jan 06, 2010

  • Level 1:

    An expert who has achieved level 1.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Before you repair try to start in save mode.
Take out the Battery than hold the power button and put the battery back in. This should start it in save mode. It will also solve the issue with the flashing acclivity button and black screens.

Best wishes from Thomanji

Posted on Aug 22, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Harmony 1000i remote [Logitech]


Screen will not power up. No controls Function ?

Posted on Nov 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My logitech harmony 1000 doesn't work after charging overnight. I have to hook it to the computer to update it. Is this a battery issue?


When was the last time u replaced the litium battery?If 2 years or more the litium battery has not been change.Yes,it is the litium battery issue.

Apr 24, 2011 | Logitech Harmony 1000 LCD Touchscreen...

Tip

Harmony 1000 Manual Download


Download Logitech Harmony 1000 Remote Control Manual

c54fb7c.jpg

Have you misplaced your Logitech Harmony 1000 Remote Control Owners Manual?

Would you like a digital, searchable, pdf version of the Logitech Harmony 1000 Remote Control Users Guide?

Follow this link to download a pdf version of the operations manual.

I hope that helps.
__________________________________________
Logitech Harmony Firmware Update
Harmony Mac Software Download
Harmony Win Software Download
Logitech Harmony Safe Mode Fix
Harmony Remote Glow Light Fix

on Apr 30, 2010 | Logitech Harmony 1000 LCD Touchscreen...

Tip

Harmony 1000 Manual Download


Download Logitech Harmony 1000 Remote Control Manual

c54fb7c.jpg

Have you misplaced your Logitech Harmony 1000 Remote Control Owners Manual?

Would you like a digital, searchable, pdf version of the Logitech Harmony 1000 Remote Control Users Guide?

Follow this link to download a pdf version of the operations manual.

I hope that helps.
__________________________________________
Logitech Harmony Firmware Update
Harmony Mac Software Download
Harmony Win Software Download
Logitech Harmony Safe Mode Fix
Harmony Remote Glow Light Fix

on Apr 30, 2010 | Logitech Harmony 1000 Advanced Universal...

1 Answer

I have a logitech Harmony 890 remote. The battery


To check to see if your device is controlled by a RF (radio frequency) or IR (infrared) remote:

Power the device on manually

Cover the front of the original remote that came with the device with your hand

Press any button on the remote that you know the device would respond to normally

If the device responds even when your hand is covering the front of the remote, the remote is RF and the device cannot be controlled by the Harmony remote


Another test that can be performed is using digital camera:

Using any digital camera, even one on a cell phone, camcorder or webcam, look through the screen of the camera at the front of the remote

Press a few buttons on the original remote

If you see flashes of light as illustrated, the remote is IR and the Harmony can control it. If the remote does not flash, this original remote is an RF remote and the device cannot be controlled by the Harmony remote

For comparison, try the same steps with a remote control that you know is working correctly, such as the original remote for the TV, or DVD player. You should see the IR emitters flashing when performing this test.

Feb 08, 2010 | Logitech Harmony 890 LCD Remote Control

1 Answer

Wine was spilled into my Harmony 1000 remote


Have you remove battery from the remote immediately after wine spill? If not, your remote is gone and most likely not repairable.

Nov 23, 2009 | Logitech Televison & Video

Tip

Harmony 1000 Manual Download


Download Logitech Harmony 1000 Remote Control Manual

c54fb7c.jpg

Have you misplaced your Logitech Harmony 1000 Remote Control Owners Manual?

Would you like a digital, searchable, pdf version of the Logitech Harmony 1000 Remote Control Users Guide?

Follow this link to download a pdf version of the operations manual.

I hope that helps.
__________________________________________
Logitech Harmony Firmware Update
Harmony Mac Software Download
Harmony Win Software Download
Logitech Harmony Safe Mode Fix
Harmony Remote Glow Light Fix

on Apr 30, 2010 | Televison & Video

Tip

Harmony 1000 Manual Download


Download Logitech Harmony 1000 Remote Control Manual

c54fb7c.jpg

Have you misplaced your Logitech Harmony 1000 Remote Control Owners Manual?

Would you like a digital, searchable, pdf version of the Logitech Harmony 1000h Remote Control Users Guide?

Follow this link to download a pdf version of the operations manual.

I hope that helps.
__________________________________________
Logitech Harmony Firmware Update
Harmony Mac Software Download
Harmony Win Software Download
Logitech Harmony Safe Mode Fix
Harmony Remote Glow Light Fix

on Apr 30, 2010 | Logitech Harmony 1000 LCD Touchscreen...

1 Answer

My harmony 1000 remote is not recognized by my mac computer


I had the same problem today on PC with the Harmony 1000. I noticed on the USB cable that mine came with it had a warning red icon (!). 1. install software then 2. plug in USB...

I didn't see this and I installed my software whilst the device was in the charging cradle with the USB cable plugged into my PC.

Before the software was installed I noticed the USB icon next to the Help on the remote screen, this dissappeared when the software finished installing the software and drivers.

I removed the remote from the cradle, pulled the battery out, unplugged the USB from the remote and computer, restarted my PC, powered on the remote, started the software on the PC and then plugged the USB into the remote and then the PC.. it was then recognized.

Mar 14, 2009 | Logitech Harmony 1000 LCD Touchscreen...

1 Answer

Broken screen for logitech harmony 1000


I can fix your screen and replace it with a new one. My dog bit my harmony 1000 and shattered it. I have also replaced a harmony 1100 screen. I have been in electronics industry a long time and considering repairing lcd screens on harmony 1000 and 1100 remotes

Dec 19, 2008 | Logitech Harmony 550 Remote Control

1 Answer

Harmony 1000 in safe mode?


The harmony remotes have a built in safe mode, similar to a Windows XP computer. Usually you enter the safe mode on the harmony remotes by taking the battery out, then pressing the power off button and holding while putting the battery in. If you continue to press the power off button, the remote will display safe mode on the screen.

If you are not doing the above procedure and you are still getting the safe mode on the display of the remote, I would try to update the firmware on the remote. And if you have an RF Extender, update the firmware on it at the same time.

Hope this helps,
81

Dec 19, 2008 | Logitech Harmony 1000 LCD Touchscreen...

Not finding what you are looking for?
Logitech Harmony 1000 LCD Touchscreen Remote Control Logo

2,957 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Televison & Video Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

Terry Hair

Level 3 Expert

4125 Answers

Are you a Logitech Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...