Question about Syntax Olevia 226T 26 in. LCD Television
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
A lot of the " auto channel scan " etc. need a certain signal strength. you could have too meny tvs,equipment or anything connected to the "signal giver" that is sucking the signal strength.Not just turn off ALL connections to signal but disconnect the antenna 'input' to any equipment (sometimes people connect cable wires to radio receivers for stronger & better signals.)
You could have a open circuit to the input of the equipment in trouble.If you know how to get inside (with out killing yourself) connect an antenna directly to the end of the line of the intanna input INSIDE of the TV. if the signal comes in and the tv 'autoscans' and locks channels, then you have a open wire leading into the circuit.
p.s. BE CAREFUL!!, IF YOU don't know how or what you are doing.........DON'T DO DAT !! [that]
Posted on Nov 30, 2008
the only thing is to keep trying it but you might want to leave the television off over night and then try it the next day.. also try doing the firmware on a 1G or less thumb drive...if the television is still not grabbing the firmware then it sounds like the television will need to get service... this means the television's main-board will need to be flashed.
Since the Manuf. of Olevia is out of buss the only company at this time that has the tool and parts to repair the television will be the 3rd party repair center called Amergence Technology ( 866-965-3842)
Posted on Jul 30, 2009
look all around the bottom of the TV there has to be screws or clamps some around the mother board cover that should help
Posted on Aug 26, 2009
There are two places to look for the problems, the backlight inverter board and the power supply. Look at the power supply first since it is easier to get to, look for burnt parts, bad capacitors, etc.
Please post back what you find.
Posted on Nov 16, 2009
Check the Power Up setting to be sure it is starting up in HOME mode rather than SHOWROOM mode. In showroom mode, many settings cannot be changed.
Posted on Feb 15, 2010
Tips for a great answer:
Jan 26, 2016 | Olevia 37" 237-t11 1080i widescreen hdtv...
Dec 17, 2013 | Olevia 26" 226-t11 hdtv widescreen lcd tv...
Feb 26, 2013 | Olevia 26" 226-t11 hdtv widescreen lcd tv...
Jul 02, 2010 | Syntax-Brillian Olevia 242TFHD 42 in. LCD...
156 people viewed this question
Usually answered in minutes!