Question about Denon AVR-1705 Receiver

1 Answer

Denon AVR 1705-no audio on TV

The Denon AVR1705 has been setup & working for about 2 years. Suddenly, the DVD player stopped outputting audio however CD's would continue to play. I disconnected the DVD player to test at another source, DVD works fine. Reconnected to Denon and now the DVD plays audio but now I don't have audio when on TV source. Suggestions?

Posted by on

  • roneriksen Jul 28, 2008

    no audio on tv mode,picture fine. when I switch to dvd I can here the TV. Switch back to TV same problem no sound? I unplugged - switch to auto,nothing - tried the microprosser reset,nothing very frustrating



    roneriksen@sbcglobal.net

×

1 Answer

I have had the same problem and was told that it is a "board" inside. Essentially it has lost the surround sound ability and can only play things in Direct/Stereo. Mine is just over 2 years and I originally thought my kids had hit a button on the thing causing the issue...ended up paying $100 to trouble shoot it and confirm that it is internal and more expensive to fix than replace. Can't say that I will be buying a Denon again.

Posted on Jul 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, just connected a Blu Ray player to my sytem. I connected the player via HDMI direct to the TV and the audio output direct into Optical 2 on the Denon. Problem is that there is no sound. Also...


We can't make assumptions about proper and complete setup if you don't explicitly mention the steps involved, so... did you assign and select the digital inputs properly?

http://www.retrevo.com/s/Denon-AVR-2803-Receivers-review-manual/id/363bh829/t/1-2/

Page 23 etc

BTW: I concur with your decision to send the video directly to the TV from the BD even though Denon and others expect it to make a hop through the receiver first.

Get into your BD and find its audio out setup. Make sure its settings for digital audio output bit rates, speaker presence, type, size, distance and bass-handling are set correctly.

Jan 30, 2011 | Denon AVR-2803 Receiver

1 Answer

I have a Denon AVR2307 to which is connected,via optical audio and component video a DVD player/recorder and this works well but in order to take some of the work off the player part I've bought another...


HDMI signal from DVD can not be down converted to analog component signal.
Connect your new DVD to a component input 1..4. Make sure that component input assigned to desired input (dvd/vcr/sat/) (setup - input setup - input - component assign - component x etc). Connect coax output of DVD to coax x input of the receiver and assign it (setup- input setup - "input" - digital assign ..). Probably you need to setup DVD output resolution to 720i or 720p in dvd setup menu.

Sep 09, 2010 | Denon AVR-2307 Receiver

1 Answer

Denon AVR-2807 HDMI out signal


i seem to have a similar problem with my Denon AVR 4310CI . The output to my LCD TV just went green . On checking with some people , they suggested resetting . it didnt work . Any probable reasons

Feb 06, 2010 | Denon AVR-2805 Receiver

1 Answer

Video does not work All this while, I had never used the video components of my AVR 1705. Recently, i wanted to connect the component out of the cable set top box and dvd player to the avr and the output...


Hi
The settings on many DVD players and TVs may need to be set to indicate the type of input/output being used(RGB vs YUV/YPbPr, and if set wrong the image may not be properly displayed. Try Look for such settings in your TV and/or Amp!

Good luck
Bruce

Dec 07, 2009 | Denon AVR-1705 Receiver

1 Answer

How to change the video output on denon avr 486-I have 3 devices using the component video inputs (playstation 2, xbox 360 and a dvd player) but i have an analog video output going to my tv. my devices are...


under the system setup menu go to video setup, and re assign the devices, then make sure the video output is assiggned to component as well. That should give you what you need

Jul 16, 2009 | Denon AVR-687

1 Answer

HDMI output from AVR-4806


You say your connected from the DVD to the Denon with an HDMI cord and the Denon to the TV with an HDMI cord and you get no DVD video? can you get the Denon setup menu? if so change the res. output on the DVD to 480p, 720p or 1080i but not 1080p

Feb 15, 2009 | Denon AVR-4806 Receiver

2 Answers

Denon AVR-1705 Missing Video Functions?


Hello,

What you need to do is connect all your devices to the Denon Using the best connections (Yellow Video=OK, S-Video=good, Component green-red-blue=better and HDMI=best. if you do not have a DVD that upconverts to 1080i or p when using HDMI, I would use component cables where available from your devices to the Denon other wise use the next best connection available and if connecting digital audio make a chart of all connection so you can setup everything when your ready for programming the Denon

Feb 11, 2009 | Denon AVR-1705 Receiver

2 Answers

No system configration display on AVR3300 since moving.


Make sure the S-video and the composite cable are not plugged in it the same time from the Denon of at the Plasma

Jan 19, 2009 | Denon AVR-3300 Receiver

2 Answers

No HDMI video output from AVR-588 receiver to plasma TV ???


the avr-588 apparently cannot carry sound via hdmi - don't know why; just what i found out from the geek squad at best buy; solved the problem by connecting optical cable from cable box to receiver; be sure to change the input on the receiver for opt-2 (system setup >2 inputs) to correlate with tv

Feb 16, 2008 | Denon AVR588 Receiver

Not finding what you are looking for?
Denon AVR-1705 Receiver Logo

377 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon Audio & Video Receivers Experts

 Elex
Elex

Level 2 Expert

49 Answers

jonpoint

Level 1 Expert

4 Answers

Tech Leprechaun
Tech Leprechaun

Level 2 Expert

61 Answers

Are you a Denon Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...