Question about Uniden BC340CRS Base Scanner
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
danval, I looked up a pic of your scanner and it is pretty straightforward. If it is the 16 channel I was looking at, here is the step by step programming.
1- Push manual button to go to the channel you want to start programming.
2- Enter the freq number in.
3- Push the E button to enter it in the memory.
4- To review what you programmed, push the Review button.
5- Use manual button to step to next channel and start over from #2
That should get you started with the scanning hobby.
The scanner has a Priority button that when activated will stop scanning and go immediatly to the priority channel if someone keys their mic.
If you need freq's (or more of) for your area, go here and click on your state and county and it'll give you a complete listing.
Hope this helps you out, let us know,, Mechanic
Posted on Feb 12, 2008
The BC147XLT is too old to obtain a manual from Uniden, but here's how you program it:
Turn it on & press 'Manual', then enter the number of the channel you wish to program & press 'Manual' again. Now enter the frequency you want to put in that channel, example 155.550, and press "Enter'. Then press manual to go to the next channel or repeat the first procedure to select a different channel other than the next one. Repeat the programming procedure for each channel.
Posted on Sep 26, 2008
Email me and let me know what area you live in and give me an idea of what you would like to listen to. I may be able to help.
Posted on Jan 14, 2009
SOURCE: Please help us program a
To program a known frequency into the BC340CRS:
- Power the scanner ON
- Press the E/PGM key to enter programming mode
- Enter the number of the channel that you wish to program
- Press HOLD
- Enter the frequency, including the decimal point (e.g., 156.225)
- Press E/PGM to enter the frequency into memory
Press the UP or DOWN arrow to advance to the next channel you wish to program
Press HOLD or SCAN to exit the programming mode.
More detailed programming instructions can be found in the factory operating manual which you can download and print, free of charge, here:
For a comprehensive database of active frequencies in your area, visit:
Listening in since the 60's
Posted on Oct 24, 2010
Tips for a great answer:
Feb 09, 2014 | Uniden BC340CRS Base Scanner
Jun 18, 2011 | Uniden BC340CRS Base Scanner
Mar 06, 2011 | Uniden BC340CRS Base Scanner
Feb 03, 2011 | Uniden BC340CRS Base Scanner
Dec 27, 2010 | Uniden BC340CRS Base Scanner
Oct 23, 2010 | Uniden BC340CRS Base Scanner
Oct 07, 2010 | Uniden BC340CRS Base Scanner
Dec 26, 2009 | Uniden BC340CRS Base Scanner
Apr 20, 2014 | Uniden BC340CRS Base Scanner
122 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: