Question about LG WM2016C

2 Answers

My lg Tromm front load washer had a UE error code. I know this is for an unbalanced load but I turned off the machine. Once I adjust the load balance, how do I get it back to the spin cycle

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 472 Answers

These units have had alot of problems especially if it is on a pedistal ...they won't admit this is a problem but i have been a lg servicer for over 4 years now and see it everyday ...the unit has a stator on the rear of the tub and on the stator is a device called a hall sensor that goes bad very often... it is what controls the spped and balance of the tub..if the load starts getting unbalanced the hall sensor will tell the motor controller to slow the speed down... most likely this is your problem.... good luck please vote

Posted on Jan 03, 2011

  • mike Jul 15, 2013

    So the fix for code " UE " is the same for " LE " according to other complaints.

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I have LG WASHING MACHINE 7.5K
MADLE NO; WD10409C.
the spin dosnt work ?

Posted on Feb 14, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Le and ue code is on


LE code is locked rotor which is because the UE unbalanced load occurred. If you had a small load or a load that was one large bulky item or even something like sheets or towels knotted together the machine could not balance the load after 10 attemps. So it asks you to help with error codes.

Jan 29, 2014 | LG TROMM WM2688H 4.0 cu.ft. Front Loading...

1 Answer

UE Error Code


The UE error code (Unbalanced Error) displays when you wash items that cause the machine to shake badly during the spin cycle, if possible wash and drain the items only, then open the door and stack the items evenly on both sides of the drum in order to balance it, now select the spin cycle.

Dec 26, 2013 | LG WM1812C Front Load Washer

1 Answer

UE Error Code on LG Tromm Washer


From back or underneath, check that all three shock absorbers are attached. Take top off and check if both springs are in place and un broken

Mar 22, 2017 | LG Tromm Front Load Washer And Dryer Set

1 Answer

What is the UE error code on an LG front load washer


hi,

the code UE means that the load is unbalanced,, just shift the load evenly and restart machine.

chris...

Sep 20, 2012 | Washing Machines

2 Answers

What does UE mean in the window of my washer


UE = Unbalance Error. If you are doing a large item and cannot add, reduce, or adjust the load, try adjusting the spin speed to a low spin speed setting. If the load is still too wet, you can run just a pump and spin by turning on power and then selecting the spin speed, one setting higher than the last one which ran the full cycle through without resulting in the UE code,(without selecting a cycle) and push start.

Feb 05, 2010 | LG TROMM WM2688H 4.0 cu.ft. Front Loading...

1 Answer

Error code UE


Hi,

UE Refers that the Unit is Unbalanced. Take out the clothes out of the washer and then Run the washer. Does it Spin?

If yes, then it might be Unbalanced Load. Try to Load Small Clothes. If not, or if the Error is Appearing again and Again, Control Board or the Sensor is at Fault. You cannot Test the Control Board or the Sensor but usually Sensor is the Common Problem with Most of the LG Washers.

So, First Change the Sensor. If Problem Persists, Change the Control Board. On Most Models, Sensor would be Located near the Front of the Unit on the Side of the tub.

Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Dec 26, 2009 | LG WM2496H Front Load

1 Answer

Ue error code on my LG WASHER


Hi there
hope this helps you .
UE - Unbalance switch error Unbalanced load is sensed three times during a spin operation. Open lid. Rebalance laundry load and close lid.
· Check wiring harness
· Check unbalance switch
· Check circuit board thank your for writing to fix ya.
Best regards Rich

Dec 08, 2009 | LG WD-16115FD Front Load Washer

1 Answer

LG front load washer coded UE. what does that mean?


UE means unbalanced error. when you see this, it means the clothes are unevenly distributed in washer, it's basically unbalanced.

Dec 03, 2009 | LG WM-2077C Front Load Washer

2 Answers

Error Message and Tub not spinning


UE is likely an unbalanced load or load is too large. Reduce the size of the load and your issue should be resolved.

Jul 21, 2009 | LG WM-2277HW Front Load Washer

Not finding what you are looking for?
LG WM2016C Logo

1,440 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...