Question about Home

1 Answer

Greetings and Happy New Year, I have a Steam Shower that needs repair or replacement. The model installed is a Thermasol Reflections Steam Shower Unit which is no longer made by the manufacturer (Thermasol). Given my piping configuration and space limitations this size unit is what I need. The unit still turns on but overheats and is not working properly. Any help for replacement (used/rebuilt is great) or something new that fits in the current space would be great. I live in New York City. Thanks in Advance Frank O

Posted by on

  • harry Jan 06, 2013

    I have the same unit and its stuck on low flo. Does anyone have the manual?



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Expert
  • 1,772 Answers

Sorry to read about your problem, I hope this helps you out.

you have to try and find a good service person, steam units are easy to work on, and the units needs a good acid cleaning, to remove calcium buildup..and maybe new seals, which can be made...

I tried to help you. Please help me and Rate/Vote on my response. We take the time to answer your question's. take the time to rate us.Thanks and good luck

4 Thumbs - Very Helpful
3 Thumbs - Helpful

Posted on Jan 03, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My steam shower is dripping water when it is turned off... all water is turned off.. please contact me since my water is dripping and is costing me money! the drip is where the steam comes out.. my number...

You have to turn main water off to house, then in side shower head is a gasket / otherwise known as a 0-ring, that needs replacing. Yes, a 50 cent part is causing this. If you don't know how to replace shower head 0-ring, just take shower head to any home depot,they will put it inn for you. Just make sure you turn main water line to house off, otherwise real leak. Let me know if helps. Thanks mike

Jun 22, 2011 | Thermasol Electrical Supplies

1 Answer

Hi, I have a 2 year old Thermasol steam generator model 140 serial # 140 28543. This unit has been used 5 times in the past year. When I press the timer located in the shower room the 60 min light turns on...

This sounds like you may have some calcium build up in the water feeder or level switch. You can call our tech support at 800-776-0711 and they can help you with the next step to get this problem solved.

Jan 30, 2011 | Thermasol Steamshower Generator AF Series...

1 Answer

I have a Thermasol one touch steam shower, and recently when I turned it on, after the City shutdown the water (for installation for a new house), all I get is the lights flashing (appearing to go through...

These units sometimes have a GFI outlet behind inside wall or in a closet or even in the bathroom some where-check if you do have one it may need to be rest

Sep 08, 2017 | Thermasol Home

1 Answer

I have a Thermasol Steam unit and the wall unit is flashing a 4 blue light sequence and will not operate...even after resettting the breaker...

You can contact ThermaSol customer support either through email at or by calling one their toll-free numbers West Coast:

East Coast :

They would be happy to assist you with your steam unit.

Jan 08, 2011 | Kitchen Ranges

1 Answer

The steam shower reads ttmpl

This is a temp sensor low or disconnected contact Thermasol at 800-776-0711 and our tech support team can help you out.

Feb 02, 2010 | Thermasol Steam Bath Generators - Ambiance...

2 Answers

TTMPL code showing on my Signature series control panel. ???

I have a Thermasol steam generator which had the error code TTMPL and it had to be replaced by the manufacturer. From memory, the error code might stand for "tank temperature monitor pressure low" or something similar. As an aside, the replacement generator just started to show the same error message -- so now I'm two for two -- and not entirely happy.

Jan 16, 2010 | Thermasol Steam Bath Generators - Ambiance...

1 Answer

Hi, i have a new pro from thermasol steam gen.

Hello. Your thermasol pro is an excellent product. I am going to give you a link to the Thermasol Troubleshooters guide which will allow you to go step by step through all of the possible issues. And then, if you are still having problems with your Thermasol it will give you a direct phone number to call Thermasol.
Regards, and Happy New Year. Enjoy your steam bath! Joe

Dec 31, 2009 | Hammering

2 Answers

Thermasol Pro 150 - 25094. Doesn't work. I have a very simple controller. Just a gib gray button and four other led lights near the 15 , 30, 45, and 60 lights to set the time. I think I need to do the auto...

yes thats correct or if you have manuel flush at the genrator there is a ball valve. open for minutes then close and run generator for thirty minutes without anyone in the shower.

Mar 12, 2009 | Thermasol Steam Bath Generators - Ambiance...

Not finding what you are looking for?
Home Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Home Experts

john h

Level 3 Expert

15387 Answers

Tom Chichester

Level 3 Expert

45112 Answers

Brad Brown

Level 3 Expert

17328 Answers

Are you a Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides