Question about Emerson CR202EM9 TV

1 Answer

I cannot switch to tv/video imput with my dish network remote on my emerson tv and there is no button on the tv itself. What channel does it have to be on so I can use my xbox

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 185 Answers

Have you tried the cheannel down button to cycle inputs? If that's not helping try this link it has the usual troubleshooting steps.
http://www.dishnetwork.com/SupportSection/video


Daniel Busa
DISH Network Customer Service

Posted on Jan 18, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have Dish Network with the Hopper. My reviver has a HDMI slot and hooked mt Roku but cannot find how to switch the "input" to what Netflicks. Ugh, been at it for hours!!


Use your TV remote "input" "source" or "tv video" input button. If using the.Dish remote press the clear tv button then input. Repeat to go back to HDMI. Make sure you press sat to change channels once you get back on the HDMI input for dish

Oct 05, 2014 | DISH Network Televison & Video

1 Answer

What is the code to go whith the spongebob tv on the dish network


I would suggest using a Power Scan to program the remote to this TV, if this doesn't work there is a compatibility issue.
Power Scan
1.) Hold down the clear "TV" button on the remote for four seconds, then press 500 pound ( #)
2.) Hold down the clear "TV" button on the remote for four seconds, press the big power button once.
3.) Press the channel up button once per second until the TV turns off then press pound (#).

Daniel Busa
DISH Network
Customer Service

Mar 27, 2011 | Emerson SpongeBob SquarePants TV

1 Answer

Cannot enter correct code for dish network remote control


Try these steps:

Power Scan
1.) Hold down the clear "TV" button on the remote for four seconds, then press 500 pound ( #)
2.) Hold down the clear "TV" button on the remote for four seconds, press the big power button once.
3.) Press the channel up button once per second until the TV turns off then press pound (#).
When you finish several functions to make sure the remote works. Hope this helps!!

Daniel Busa
DISH Network Customer Service

Feb 26, 2011 | Emerson EWC27T3 27 in. TV/VCR/DVD Combo

1 Answer

TV Stuck on 1 channel


We would be happy to help get that fixed right away. The first thing we want to ensure is that all connected equipment is on. We want to then check what type of cable was used to connect the TV to the receiver. If you are using a Coax Cable to connect the receiver to TV1, check the receiver's back panel for the output name. If your receiver has a "TV CH 3/4 out": Tune TV to channel 3 or channel 4, back if it is labeled "Home Distribution": Tune TV to channel 62 or 75. If using non-Coax (RCA, Component, or HDMI) to connect receiver to TV1, cycle through the inputs until picture appears; Most TVs have a "TV/Video", "Input", or "Source" button. If we are still not getting a picture then unplug receiver for 10 seconds then plug it back in, this will reset the receiver, then try cycling the inputs again.


We hope these steps resolve the issue. We want to thank you for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Jan 22, 2010 | Emerson EWF2004 20" TV

1 Answer

Cant program my emerson flay screen tv wiyh dish


Hi tbombertigermy name is Mike Houston of DISH Network and I was going over your post and Isee where your Emerson TV needs to be programmed to your DISH Network remote. Ihave the codes 569, 632, 505, 516 and 004. What you will want to do is holddown the clear TV button for 6 seconds and then press in the three digit codeand the # button. If these keys don't work we do have a step called Power Scanand I will send the link to help with the setup. http://www.dishnetwork.com/SupportSection/power-scan-instructions

Jan 06, 2010 | DISH Network IR Remote Control

1 Answer

Cannot find code for dish network remote to control emerson 32 in


Phillip with DISH Network here. We would be happy to help with that.

Step 1:
Press and hold the TV Mode button until all mode button back lights come on, then release.

Step 2:
Use the number buttons to enter the device code corresponding to the equipment. In your case we are going to use the Emerson codes: 764, 632, 648, 670, 699, 194, 537, 537. Then press the pound (#) button.

You should be able to control the volume and turn the TV on and off, if not try another code. Although we try to facilitate you in controlling both devices with one remote we cannot guarantee that we have codes for all the different brands and models of TV's.


Phillip Chang
DISH Network Customer Service Representative

Dec 12, 2009 | DISH Network IR Remote Control

1 Answer

Get to Video 2 on emerson tv without remote


Go to channel 3 and press the channel button down. It should only take 2-4 times to get to that channel. Hope this helps. Let me know if I can help you further.
JimmyC

Sep 28, 2009 | DISH Network IR Remote Control

1 Answer

Need an Input to hook up Dish network/xbox 360


Sometimes its tricky with those buttons on the front but with most tv's you can get to the menu and change inputs.
One you figure that out you will want to go back in and add that input as a channel in the add/remove channel section then you will be able to get to that input by just changing the channel down below 2
( another way to do this would be to run the auto program with the devices on and see if it adds them that way)

Sep 18, 2009 | Emerson EWF2004 20" TV

1 Answer

Changing channel to imput manually


if you have dish network then all you have to do is press the button that says TV then press the button that says TV Video.

Nov 08, 2008 | Sylvania 6427TE 27" TV

Not finding what you are looking for?
Emerson CR202EM9 TV Logo

613 people viewed this question

Ask a Question

Usually answered in minutes!

Top Emerson Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74245 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

 Grubhead
Grubhead

Level 3 Expert

5126 Answers

Are you an Emerson Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...