Question about Medion M3 Composer 5200 PC Desktop

1 Answer

I want to change my power suply,mine has got very noisey over the last year, works fine but noisey please reconmend a good up grade make and model or severial 450 to 800 watts I have the medion m3 composer 5200

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Expert
  • 49 Answers

Corsair 550VX (550watts and in my opinion the best PSU in it's class)
Or Corsair 450VX which is a 450 watt version and probably more than you need but not over-kill either. I have used a 450VX in my own system on a Quad Core 125 watt AMD Phenom Processor, 3 hard drives, 8 USB Ports, 5 case fans, 2 DVD burners, etc.. without any problems for years. They are guaranteed for five years from the manufacturer.

http://www.newegg.com/Product/Product.aspx?Item=N82E16817139004

http://www.newegg.com/Product/Product.aspx?Item=N82E16817139003

Posted on Jan 03, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 56 ford focus 1600 zetec is making an awful noise when even slightly turning the steering wheel in either direction, does this mean my power steering has had it????


Hi

No most likely the power steering needs a new belt, when they loosen off or start to decay they squel lodly, ofetn they can be tightened up but for the cost involved just buy a new one. if the steering still feels like it is working correctly but just noisey then most likely it is fine and it will just be the belt.

on a car this year the power steering rack and pump should last another few years yet.

Hope this helps, p.s a garage will not charge much to fix this.
Regards

Dan

Jan 08, 2011 | 2006 Ford Focus

1 Answer

Hello: there I just turned on my computer last night and it didn't turn on, I was thinking that the problem was my power suply so I changed it and it didn't work either. Can you please tell me if I have a...


NO!! your motherboard is great... just check your power wire i think you change it or dis locate it..

just see and insure that the wire in the power button was connect properly in *********** board..

but if its doesnt work just look at all the capacitor check all capacitor.. look at each one of them
if there was a bubble.. or blown up..

Oct 06, 2010 | Intel D865GVHZ Motherboard

1 Answer

Making noise but working good


Hello,

Either you have a noisey bearing, or the fan on top is rubbimg against the cover. My neighbor's pump has been making noise for several years now, and the pump seems to do fine. If the noise gets worse, I'd look at changing the bearings.

Best regards, --W/D--

Aug 21, 2009 | Jet Plumbing

1 Answer

I have a 95 dodge intrepid and when it get hot it shut down and i change the coil and everything and still it does it please help me wendyjelimra@aol.com


change your wires also. they only last a year maybe 2 at most. I change mine every year. cost about $70 for a good set. cheap set only last 6 months

Jun 19, 2009 | 1998 Oldsmobile Cutlass

1 Answer

Monitor does not turn on automatic


change your power cable.
also check your power suply and earthing.

Nov 19, 2008 | Princeton Digital VL2018W Monitor

1 Answer

My bauknecht washing machine is 20 years old and still works fine, except it will not shut off the water. I have to do this manually when we get to the spin cycle. It also doesn't send the water into the...


Friend,
ngfam1 At your service!


AFTER 15 YEARS AND THREE repairs.
I threw mine in the trash and bought a Speed Queen Commercial grade washer and thats the last one I will ever by!
8 loads a week for 25 years!!!!!!!

The washers and dryers today use so much less water,electricity,and detergent that they pay for them selves after a only a few years.
My advise is, do not put good money into a washer that is 20 years old! it is cheaper to buy, run, and operate a new efficient machine! You will see you water and electric bill reduced!!!!!!!!!
Speed Queen commercial grade top loader uses only 34 gallon of water compared to the others at 48-54 gallons!
Their front load washer uses, (GET THIS) ONLY 13.9 GALLONS of water and washes in 35 minutes and the clothes are cleaner and last longer cause it uses water agitation instead of a vain to wear out your clothes! How about spinning at 750 RPM and the clothes come out so dry they are only in the dryer half the time than all the other machines! Thus half the gas or electric bill!!
All my employees have replaced their laundry pairs with Speed Queen!
My Guys call it the, "No Brainer Machine!"

I hope you can utilize the good advice I so enjoy sharing with all the good people we talk to!

ngfam1
Bless You
Please give me a good rating before you sign off here at fixya.com

Discount Parts
Major Appliance & Consumer Electronic Parts. TOLL FREE 1-(888)-338-3790 8:00AM - 12:00 MIDNIGHT 7- DAYS A WEEK





Aug 30, 2008 | Washing Machines

5 Answers

FLM-2601 will not power on


I have a 2-year-old FLM2601 that all of a sudden refused to power up, total black out. I searched the web and found the power unit seems to have a lot problems one form or the other. To keep it simple I decided to replace the whole power supply assy. I got the replacement part from "Best Buy Partserach". Part number: 6LM00220C0 (or Advent 667-L27M6-20C), about $90. I swapped the power board assembly, and everything work fine now, only hope this time it last more than 2 years…

It took a while to dismount the back panel, you need to get all the screws off, including those holding the bracket for I/O ports, the RF will remain connected by wire, but you can wiggle it through the opening when back panel comes off. I Also took the TV off the stand.

f50f6b6.jpg
9057972.jpg
1a41f9a.jpg
1bbca54.jpg
Good luck!

Jun 26, 2008 | Polaroid FLM-2601 Television

4 Answers

Completely dead


Hi This is my opinion only, but I have worked on many many DVD players, and if you don't need anything fancy, then go for the $30.00 unit. Actually, I would look for something in the $50.00 range, as the $30.00 units are very cheaply made. I have often worked on a $100.00 unit, followed by a $50.00 unit, which had the exact same laser and mechanism inside, the only difference being the brand name stamped on the front. But.... You could purchase three $30.00 units, for $100.00 and if you used them one at a time until the last one died, I dare say they would very likely outlast the $100.00 unit by far. I've probably just confused you now, so I'll just end by saying that on a regular t.v., the picture will look just as good using either option, and you can have good luck or bad luck with any piece of electronics expensive or not. Good Luck!

Aug 12, 2006 | Toshiba SD-3980 DVD Player

Not finding what you are looking for?
Medion M3 Composer 5200 PC Desktop Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Medion Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

John Anderson
John Anderson

Level 2 Expert

310 Answers

Martin Murray

Level 3 Expert

1623 Answers

Are you a Medion Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...