Question about Epson EMP 835 Multimedia Projector

Open Question

Epson EMP-835 Blue dots/haze at bottom of screen. Lamp was replaced with no change in problem.

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
BILLatNASA
  • 3 Answers

SOURCE: how can i reset the lamp of epson emp 7250

EPSON PowerLite 7250


Reset the lamp counter hours in 3 steps

1. Make sure, your projector is ON


2. Hold down the Help and Menu buttons for 5 seconds.
The "A.S." screen will appear.


3. Hold down the Tracking and Tracking - buttons for 5 seconds.

Posted on Sep 20, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My projector has a blue flickering hint in the picture, is it a lamp related issue, or is it a lcd problem.....?My lamp do needs replacing because the indicator says so.......but will replacing the lamp...


blue flickering hint, means the lcd panel is break,
or polarizer is break. We supply original projector parts: lamp, bulb, Lcd

panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and

competitive price.
any questions, feel free to contact me
have a nice day!
Jerry Lampdeng Limited

Jul 12, 2013 | Epson Replacement Lamp ELPLP30 f EMP-61...

1 Answer

Red haze at bottom of screen


Shut down the projector and allow time to cool before the lamp is taken out to be examined for any dis-coloration. If so the lamp needs to be replaced, try to test using a leased lamp to confirm Also check for shift in the alignment of the lamp settings and also the Lamp alignment.

Dec 15, 2011 | Epson PowerLite Home Cinema 8500UB...

2 Answers

Little blue dots on screen and large blue haze in upper left corn


Sounds like the light engine is going bad...that's why they stopped making these rear projection sets using LCD's. Costs almost as much as a new set! But get a second opinion before trashing it.

Apr 15, 2010 | Sony Grand WEGA KF50WE610 50" Rear...

1 Answer

BLUE DOTS ON Epson EMP-62 LCD PROJECTORS


can you take some pictures of the optics and send them to me ? this could be a circuit fault or a defective run from the manufacture, you will half to identifie whether it is optic or circuit related, try and place a piece of color filter opaque paper between the optics and try to notice the changes on the screen this may give you an indication which element may be faulted, or if it is electronic

Jan 27, 2010 | Televison & Video

1 Answer

How to change the lamp


See the User's Guide (http://www.epson.co.uk/Projectors/Epson-EMP-82/Drivers-Support) starting on page 59 (Lamp Replacement Period). There is one screw on the case and 2 screws that hold the lamp in place. See document for pictures.

Apr 28, 2009 | Televison & Video

1 Answer

Epson Emp 82, No lamp problem


the ballast is defective.sometimes it is repairable , but most of the times , it is a good idea to replace it
shyam +919867355202

Feb 07, 2009 | Epson Office Equipment & Supplies

1 Answer

Blue dots in the middle of the screen


The image processor must be getting old and worn out. Call Epson or go onto their website and see if it is  a dDIY project or if you will ned to send it in.

Apr 27, 2008 | Epson EMP S1 Multimedia Projector

2 Answers

Green dot in middile of my screen


The green dot in the center sounds like a burn mark on one or more of the picture tubes inside the set, and the curved lines are telling me that you have a problem in the convergence circuits. The blue haze around everything white tells me you either have a lot of dust build up on the lens over the CRTs, or your picture tube(s) are very weak. If this set is over about 12 years old, I would replace it. I doubt if you will be able to get the green dot out of the picture without changing the tubes which would be VERY expensive.

Jan 05, 2007 | Philips 60PP9401 60" Rear Projection...

Not finding what you are looking for?
Epson EMP 835 Multimedia Projector Logo

Related Topics:

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Alun Cox

Level 3 Expert

2668 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18410 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...