Question about NetGear WGR614 Wireless Router

2 Answers

I hooked up my wireless router WGR614v9 from comp to router from router to my internet box.. it will not show were i can use internet...or its not existant. no web access and will not reconize the router, iam running windows 7

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 536 Answers

This is most likely due to the "internet box" (modem) still having the Media Access Control (MAC) address of the device that was previously connected the modem in NVRAM.

In order to clear this old MAC address, the easiest thing to do is to unplug the power cable from the modem for 15 to 20 minutes. This allows the NVRAM in the modem to clear and makes it able to accept the new MAC address of the router.


After the modem has been unplugged from the power for 15 to 20 minutes, plug the Ethernet cable of the router into the modem and plug the power cord back in to the modem. After the modem syncs back up to the network, it should add the MAC address of the WRT54GL router to its NVRAM and assign it an IP address. This should allow the router to connect your systems to the Internet.


Please be sure to rate my answer as a 3 or 4 thumbs up if you found it helpful. The 1 and 2 thumbs-up are like saying "didn't really address the problem" and "wasn't the best solution"

Thanks for using FixYa and Happy New Year!

Posted on Jan 03, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • NetGear Master
  • 27,725 Answers

Connect the modem to your computer then the router to the modem insert the disc supplied by your ISP internet service provider then enter the the user name and password you provided to your intenet service provider ISP then just follow the prompts
hope this helps

Posted on Jan 03, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a local internet connection without any modem(by ethernet cable)..i want to connect Netgear WGR614v9 router...can u help me out


You do not want to connect as a router, there is one upstream from you. You want a switch. This is similar to a splitter. Just hook your plug from the wall to it, and then plug each unit in.

If you need Wireless, you would not plug the network cable from the wall into the normal Wan or internet port, but as if it were another computer. Set your wireless security and limit free access.

Sometimes you have to "dumb down" a router to not autiomatically assign addresses, but I doubt it in your case.

Dec 11, 2010 | NetGear WGR614 Wireless Router

1 Answer

1 year old Toshiba Laptop will not connect to NETGEAR wgr614v9


1.Log into router
2. Verify wireless router name( on the computer) >>> ( on/off)
3.Note router name you are connecting to.
4.. Check the laptop do ipconfig /all to see current IP addresses.
5. Set the laptop up in the router by WEP KEY or MAC address.
6.Note router name you are connecting to.
7. Move the laptop about 20ft away and try to log on to the internet.
This is for all routers to set up wirelessly.

Jul 12, 2010 | NetGear WGR614 Wireless Router

1 Answer

Wireless router stops internet connection to modem during install


are you sure your hooking the comcast modem in the right place?

Feb 08, 2009 | Arris SURFboard SB5120 Modem

1 Answer

Getting a router signal, but no internet


Have you check if you have a valid IP address? You could run IPconfig in the DOS window to verify this. If you have a valid IP address, try pinging the default gateway (You should be able to ping it.) Then, try to ping a website. If you could ping a website or URL but still can't browse check your firewall settings and optimize your browser.

Please post here what happen.

Thanks and regards,

BeHar

Jan 18, 2009 | Linksys (WRT54GC) Router

1 Answer

I need a manual for the wgr614v9, where can I download it from?


Dear Williams,
Here is the Manual for WGR614v9 , you can download it, from this site:

http://kbserver.netgear.com/products/WGR614v9.asp

Be Happy Always

Regards


Dec 09, 2008 | NetGear WGR614 Wireless Router

2 Answers

I have a laptop comp i just got a desk top comp i have embarq broadband internet which comp do i pit the cd into to install and which comp do i hook up the embarq box to?


It sounds as though you will need to get router to allow the sharing of the Internet between the two computers. Using a router makes it much easier to share an Internet connection between multiple computers. You would connect the Embarq box to the router on the WAN port, and then connect your computers to the LAN ports of the router. You may also want to get a wireless router in the event your laptop has a Wi-Fi connection.

Oct 06, 2008 | Computers & Internet

1 Answer

Belkin54g wireless router


its a belkin
its a static packet data router only so much info gets in before it can unload so it shuts down
get a streaming netgear router basically like a hooking direct to comp

May 25, 2008 | Belkin Wireless G Plus MIMO (F5D9230-4)...

Not finding what you are looking for?
NetGear WGR614 Wireless Router Logo

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...