Question about Washing Machines

2 Answers

I have a kleenmaid KFL washing machine coming up error 5. Not in manual need help

Posted by on

  • terry_mcluca Jan 03, 2011

    my washing machine is a KFL1600

  • terry_mcluca Jan 07, 2011

    thank you so much for your help, very fast friendly service. would recommend to anyone

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,323 Answers

Hi

Error 5 in your Kleenmaid is displayed when there is no communication between electronic timer and Inverter. If the machine is washing and communication between the motor control module and main board fails, the machine will pause for one minute. The machine will try to start three more times. On the fourth attempt it will stop immediately. If the temperature of the water in the tub is higher than 60 degrees the machine will fill cold for 30 seconds then pump out for two minutes and the failure will be displayed. To solve this issue you'll have to check the motor control board and the main board, the part that is bad should be replaced. Hope this helps...please post back for further assistance.

Daniel

Posted on Jan 03, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Washing Mach... Master
  • 9,472 Answers

What is the complete model number? Should be like a KFL2000, KFL1000, KFL850, KFL800, and so on.

Posted on Jan 03, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a kleenmaid washing machine its about 30 yrs old and still runs well but it is now leaking oil from under the adjitator how do i fix it.


Sounds like the seal for the transmission is leaking oil through the seal. You will need to remove the tub or turn the machine upside down to remove the transmission and replace the seal. That is if the seal is still made.

Nov 17, 2015 | Washing Machines

1 Answer

I need opperating instructions for my kleenmaid dishwasher dw20x


http://dish-washer.download-servicemanual.com/kleenmaid-dw20w-dw20x-dishwasher-instruction-manual.htm

Nov 22, 2012 | Washing Machines

1 Answer

Kleenmaid kfl 1506 manual required


You can view and download your manual in PDF format at this address.

http://www.kleenmaid-appliances.com.au/use&care/WM/kleenmaid/KFL1506_660448en.pdf

just copy and paste it into your address bar.

Apr 30, 2011 | Washing Machines

1 Answer

What causes "Error 4" to


Hi, googled this problem myself and found this page. Doesn't help much though. Will still have to get someone out to look at it.
http://kleenmaid-appliances.com.au/TSPM/WM/Kleenmaid/KFL1600_Fault_Codes%2040220415.pdf

Good luck, we'll need it now our warranties are useless.

Dec 04, 2010 | Washing Machines

1 Answer

Can you tell us what error 6 is as displayed on Kleenmaid KFL1600 front loading washing machine. We have the manual and it is not listed. Many thanks


Hi I've got a KFL1600 with error 6 too - I fixed this once by cleaning the filter, but now it's come up again and the filter is clean. Not sure if it's related but the door has stopped unlocking too and we have to open it by pulling the little tag in the filter door. Very reticent to get it repaired as everyone says that these machines are a nightmare and costly.

Jun 20, 2009 | Washing Machines

1 Answer

Need part for electrical mother board


You can now order Kleenmaid service parts at www.edis.com.au. Login to their online shop with the user name "retail"and password as given on the login page. Search for the parts you are looking for.

I successfully purchased and received spare parts for a Kleenmaid dishwasher this way.

Apr 29, 2009 | Washing Machines

2 Answers

KleenMaid Washing Machine shop manuals/repair instructions


There are manuals available but these only tell you about the parts of the machine and the different cycles etc. Its a workshop manual that you need and these are not discussed anywhere on the net, Im not sure these were ever produced.

Oct 12, 2007 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Brad Brown

Level 3 Expert

15441 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...