Question about Panasonic BL-C20 Network Camera

Open Question

In the manual for the panasonic bl-c20 on page 10, do I have to have the camera already plugged into my computer to start the programming?

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 4 Answers

SOURCE: panasonic bl-c20 wireless network camera

I agree, but if it's not possible to access with cd default IP address is 192.168.0.253, you need to know default gatway information of your router, maybe is 192.168.1.1 and then you need to change default IP camera address, the best option is to use a cross over cable with your computer, change your IP addres in your computer for a new one inside CAMERA RANK for example 192.168.0.128 and plug the cable in your computer and in your camera, in this way you can acces directly to the camera from explorer only writing IP address 192.168.0.253, once inside camera you can modify the camera configuration following router configuration. good luck!

Posted on May 08, 2008

Ad
yooperbud
  • 8637 Answers

SOURCE: Panasonic BL-C20

Normal 0 Probably has corrupt driver.
Try disconnecting the Camera from the USB port and reinstall the CD or Downloaded software program. When the program asks you to connect the camera to the USB port, do so and it should work.
Hope this helps. Bud

Posted on Feb 04, 2009

SOURCE: Forgot IP address of my BL-C20 network camera

try this one? 192.168.0.253
look at link below.. http://www.networkwebcams.co.uk/blog/2007/10/22/howto-set-up-your-panasonic-camera-to-work-on-your-wireless-network/

Posted on Mar 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panasonic survelliance cameras - Need to reset


HOWTO: Factory Reset your Panasonic BL-C1/20

www.networkwebcams.co.uk/.../howto-factory-reset-your-panasonic-bl-...
Dec 12, 2007 - Howto guide for resetting Panasonic BL-C1 and BL-C20 back to factory ... CCTV camera icon ... Panasonic BL-C20 Factory Reset Aperture ...

[PDF]Operating Instructions - Panasonic

ftp://ftp.panasonic.com/.../Panasonic/.../security/.../WV-NF284...

Panasonic5. Preface. The network camera WV-NF284 is designed to operate using a PC on a network (10BASE- ... This function detects a motion in a designated surveillance area and issue an alarm signal is ..... Use this button to reset the settings of.

Quick Reference Guide for BL-C230 - Panasonic


Dec 05, 2015 | Panasonic BB-HCM311A Network Camera

1 Answer

BL-131C camera - amber light flashes every 2 sec


The good news is you can download the instruction manual from the Panasonic support website - the bad news is - its not free.

Nov 27, 2009 | Panasonic BL-C131 Network Camera

1 Answer

When i switch to wireless mode, camera stays in;privacy mode


Unfortunately the electronic operating instructions are not available from the support website and have to be purchased from Panasonic.
I think it will be a case of re-setting the camera to factory settings and re-program the webcam again

http://www2.panasonic.com/consumer-electronics/support/Computers-Networking/Network-Cameras/PetCams/model.BL-C131A

Aug 25, 2009 | Panasonic BL-C131 Network Camera

2 Answers

I bought a Panasonic BL-C10 and a BL-C111a on ebay,need set up cd


I found a site for you to download the drivers for a BL-C111. The BL-CL10A is there to I beleive.
Copy this address to your browser and o there and download the driver.
Then
Normal 0 Try disconnecting the Camera from the USB port and install the downloaded software program. When the program asks you to connect the camera to the USB port, do so and it should work.
Then to use it on the Web do this.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ ) set it up as follows:
  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Your friends and Family will now be able to see and her to you.
B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:
  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
C. Windows Live Messenger:
  1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
  2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
  3. Next go to the Menu Bar on right side, click on “ “Action.”
  4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: You audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud


Jan 26, 2009 | Panasonic BL-C131 Network Camera

1 Answer

Panasonic BL-C20


Normal 0 Probably has corrupt driver.
Try disconnecting the Camera from the USB port and reinstall the CD or Downloaded software program. When the program asks you to connect the camera to the USB port, do so and it should work.
Hope this helps. Bud

Aug 16, 2008 | Panasonic BL-C30A Network Camera

2 Answers

Panasonic bl-c20 wireless network camera


Try this - unplug the power from the camera (and the ethernet cable if it is using one). Locate the 'Factory Default Reset' button on the camera get a paperclip and straighten it out. Plug the power back into the camera and press the reset button with the paperclip until you see the indicator light flash and go out (about 10 seconds). Now attach the ethernet cable to the camera and into your router and insert the Panasonic camera utility disk into your computers CD Drive. Run the setup utility from the disk and after a few minutes it should find the camera and you can follow the instructions for a new set-up. If the camera has been on more than 20 minutes when you start the setup utility, unplug it for 10 minutes and try again. Oh, and turn off Windows firewall while you are doing this.

Oct 31, 2007 | Panasonic BL-C30A Network Camera

Not finding what you are looking for?
Panasonic BL-C20 Network Camera Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Computers & Internet Experts

micky dee

Level 3 Expert

2889 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a Panasonic Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...