- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The code for this Rover radio is 1 6 9 4 Please leave a vote to show this free solution is correct.
As I have limited capacity to share free codes - for others needing a code for a car radio - I recommend the site at this link. Cheapest on the net and I use them often for other radios that I repair so I can vouch for them as being cheap, fast and accurate.
Remove the back cover on your radio. The antenna connector is located on the right of the dock connector. Carefully resolder the connections. There are 2 pins (they lead to 3 contacts). Very easy repair, all you need it a fine tip soldering iron and some flux. You can get those for around $15 at wally world.
I brought it a while back, almost two years ago, for some $65. But it is not worth it to buy this remote to me. The reason is the power consumption of this remote. It eat up power so fast, that I get tired of replacing the batteries. Otherwise it is an OK remote. So I was lucky to have found that this remote would trigger the control amp. Not too many other universal remote will. eBay has them. Here is a link to one. http://cgi.ebay.com/Kameleon-6-in-one-Universal-Remote_W0QQitemZ320329874740QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item320329874740&_trksid=p3286.c0.m14&_trkparms=72%3A1234|66%3A2|65%3A12|39%3A1|240%3A1318|301%3A0|293%3A1|294%3A50
You should be able to go to the menu on your unit as long as there is not a plug in the audio out socket, and it should give you the FM Frequency option. If you remove the plug from the audio out, you will want to power the unit off and back on to get the FM option to appear when you push the menu button.
My Navman S50 has been working fine the other day it decided to show me the safety agreement when switched on then shows half the screen black with navman S50 printed in the black section the other half shows a picture of a pretty womans face looking backwards from a car window. I can get to the main menu and then takes me in a circle back to the safety agreement I've tried resetting by holding the on off switch down for 6 seconds when switching off the device is there any other way to reset my navman S50.