My epson workforce 600 printing blank pages. - Epson WorkForce 600 All-In-One InkJet Printer

The print head is plugged up. Try the nozzle check function or the clean function on the control panel.

It appears that some ink nozzles are blocked or not seated properly.

Go to the Epson support site below and enter Epson WorkForce 600 as your model. Then go to Troubleshooting Guide in the list on the right of the web page
Welcome to Epson Support

Inkjet printers need to be used frequently to prevent ink drying out and blocking the print head nozzles.
If the print head cleaning maintenance routine does not clear the blockages, then print head needs replacing, but it may be expensive.
It may be more cost effective to buy a later model and better printer than replace the print head.

Update: Blurring of every 5th line occurs in text mode but not text & image mode. Know of a way to see text & image as default for all print jobs?

have the printer being discussed in this thread.... the Epson WorkForce 610. I just encountered the same issue, many lines were missing from the page that I wanted to print. Ink levels were fine, but every time I try to print the same thing, the same lines were missing. I read through the solutions mentioned above and I decided to see what the printer had in its maintenance toolbox on the printer itself.

Here's a solution that worked for me!

1. Go to "Setup"
2. Under Setup, select "Maintenance"
3. Select "Head Cleaning"

The printer does the head cleaning automatically. Print another page, all of the lines should show up!

Simple, no need to buy another printer or clean the ribbon...

Select Basic Print Options After opening your file for printing, open the Print window to select your print options. 1. Open the File menu and select Print. 2. Click the arrow to expand the Print window, if necessary. 3. Select EPSON WorkForce 600 as the Printer setting. 4. Select the copies and pages settings for your print job. Note:
If you don't see these settings here, check for them in your application before printing. 5. Select page setup options. Use these options to select the paper size, orientation, and scale. Note:
If you don't see these settings here, check for them in your application before printing. For example, you may be able to open the File menu and select Page Setup. 6. Select any settings that are specific to the application you're using. For example, if you're printing a photo from Preview, you see the application settings shown above.

If you have any doubt in this pls click here

Hello, Rvarnett -

I see someone posted a similar question about the Epson Workforce 600 on a different repair help website in 2012. Read the solutions provided there:
https://www.fixyourownprinter.com/posts/73053

Do you know how old the printer is - how long you have owned and used it?

It MAY just be time to purchase a replacement printer and send the Epson Workforce 600 to electronics recycling. My personal experience with Epson printers, and I have owned more than one, is that they do not seem to last much past 6 years before they do not work properly.

Had the same problem with Epson WorkForce 545, seemed to print just signature lines on emails, but not the regular text. Called Epson service, they had me go through headcleanings (Setup-Maintenance-Head Cleaning) and afterwards do a "Nozzle Check". Once the Nozzle check printed 6 squares with all the lines, I then reprinted a regular page and voila, it actually printed my text. I think my black print head was totally clogged and that's why it only printed images that used color in them...

Do a nozzle check and see what comes out.It should be under a maintenance tab on the front control panel LCD.If nothing comes out it more than likely has not been used in awhile and the head needs cleaning.If this is the case and you get it to print again do a sample page at least once a week to stop this from occurring again.

GET YOUR SOLUTION FROM EPSON

HERE IS YOUR SOLUTION

http://www.epson.com/printer/prob676ijt65/solution



a17