Question about Disney 13" TV

1 Answer

Same problem as above.Disney p1310ATV lost the remote. No Phone # in orginial manual.Television system NTSC (American TV Standard) I have tried other universal remotes also I have a Sony RM-V210 universal remote that will work the sound and change the channels but nothing else. The numbers will not change channels. I am trying to change the input so I don't have to listen to the same movie 120 times. My neighbor has a similar Disney 13" TV but their remote will not work on this TV. Thanks Shane

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 66 Answers

There may be a problem with the tvs remote sensor. most universal remotes you dont even have to enter any codes you just have to follow the same steps to enter the code but instead of entering a code all you have to do is press the channel up button after following all other steps, just keep pressing up until it turns the channel on the tv then press enter or similar button after it changes the channel and this should lock in the code without entering a specific code.And if all other remotes only half the buttons work on if it happens with every universal remotes then it probably a problem with the remote sensor or the tv . Good luck too ya!!!

Posted on Jan 02, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Universal Remote for p1310atv Disney TV


I used the vibe 4 in one but with Emerson codes1008

Mar 05, 2013 | Disney DT1350-P 13" TV

1 Answer

Disney tv Model# p1310ATV manuals


If you need owner manuals GOOGLE each model number with manual to locate them.

Mar 23, 2012 | Disney Princess TV/DVD Combo

1 Answer

Have a Disney modle tv and need the code for a remote the remote is not working now modle # P1300NTV


Try setting it to cable remote--see manual or check back label for manufacturer's parts and accessories phone number.

May 19, 2010 | Disney 13" TV

1 Answer

Replace remote for disney princes p1310atv tv?


Look on the back of the TV or in the back of the manual and you'll see the name of the company that manufactured and/or distributed the TV, or you may find a telephone number listed in the manual. You must contact the manufacturer to find a replacement remote for that TV. Universal remotes don't work because that set is actually made by a small company that doesn't communicate with universal remote makers.

I hope I've provided you useful assistance and that this information allows you to make an informed decision as to how to proceed from here. Please be sure to vote on my response. I hope I've earned a good rating from you today.

Please post a comment if you need additional assistance so that I can help you further.

Jul 11, 2009 | Disney 13" TV

1 Answer

I have a disney princess T.V. and I lost the remote for it, I bought a univercial remote and cannot find the code to use it. I followed the directions and the code is not listed in the paper that came with...


My disney princess tv model P1310ATV uses code 759 with Echostar 6.2 and 6.3 remotes. This code is listed in the echostar manuals as a code for Hisense manufactured TV's.

Feb 28, 2009 | Disney 13" TV

4 Answers

Dish network remote code for Disney 13" TV


On your dish remote, press and hold the tv button until all 4 buttons light up, then release. push either of the power buttons once. Now start pushing the down channel button, It's the one right below select, continue pushing it until tv turns off. When tv goes off push down button one more time then push up button, when tv turns back on stop and press # key, tv light will flash 3 times and should be set. Note....if u press down button and tv does not turn off after going through all codes( tv light will start flashing) press cancel and try again only channel up this time. hope this helps.

Dec 31, 2008 | Disney 13" TV

2 Answers

Has sound but no picture


if you know how solder.then re solder your tv first. then,check the vertical section maybe the ic is busted

Sep 27, 2008 | Disney 13" TV

1 Answer

Disney P1310ATV television


It tells you how in this manual.....http://www.ipc.nl/extensions/templates/default/gebruikshandleidingen/en/TV_combis/Pirates/10202_TV_PIRATES_GB_GA.pdf

Aug 13, 2008 | Disney PC1310 TVD TV

10 Answers

What universal remote works with model number p1300nTV


I too own the Disney Pirates of the Carribean television. We have it setup in my boys' room so they can only watch DVD's, there is no cable connected to it. However, everytime we turn it on, we have to use the remote to change the input to dvd. The large Mickey button on the remote fell out and my daughter lost it. Without that button, you can't change the input at all. Therefore we have a perfectly functioning television that we can't use.

I emailed Disney and they redirected me to the actual manufacturer of the TV, Starlight Griffin. The phone number is 866-387-1902. I called and within 5 minutes, I was told that I would recieve my new remote within 10 days at NO COST TO ME!!

I went crazy for days trying to figure this out so I had to share that info with all of you immidiately! Good Luck!!

Mar 04, 2008 | Disney 13" TV

8 Answers

Universa remote codes.


I used Memorex code 135

Jan 20, 2008 | Disney DT1350-P 13" TV

Not finding what you are looking for?
Disney 13" TV Logo

304 people viewed this question

Ask a Question

Usually answered in minutes!

Top Disney Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73691 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

Chris Goulet

Level 2 Expert

41 Answers

Are you a Disney Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...