Question about Masonry Tools

1 Answer

Unfortunately i don't have the manual and i need to change the blades on a McAllister Planer Thicknesser COD305P. Can anyone help?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,100 Answers

I can help, but you'll need the gauge to set the knives exactly in the same spot on both or all 3. Do you have the tools that came with it? Do you have new knives or are you getting those sharpened? Getting then out is no problem, just take note of how they sit in the cutter head, loosen the jib screws, don't touch the set screws, take out all the knives, clean the jib off and the blow out the cutter head, sharpen the knives or get the new ones ready to go in, put the jib in, lay the knife on it, tighten up each end just snug, take your setting tool and just scrape the top on the knife, do not touch it, move it or stop on it, just shave it slightly, adjust it so it is just right, tap it back in with a piece of wood if you pull it up too far, do the other side the same, then snug up the jib screws, check the depth again, It has to be the same left and right, all knives, otherwise you will get chatter marks and speed bumps in your wood. Once it is set, tighten up all the jib screws, then tighten them again, do the other knives, all the same, do not answer the fone, get them all tight, put on the cutter guard, and plug it back in. You should be all set.

Posted on Jan 02, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need all manuals for my SAC RS 63-S Surface Planer


Planers - Single - West Coast Machinery

www.wcmachinery.com/WCMACHINERY/myinventory.asp?...S...
Delta/Invicta RC-63-D 24" Planer in excellent condition. ... Table jack screw sprocketshave been replaced ... 16" single surface planer, - 5HP 208-230 volt single phase belt drive motor, - push ... with operation manual, - excellent condition but offered "as taken from service". ... 2240/440V, three phase S/N 203851 1974 year.Missing: my

Wood working machinery > Planers > Thickness planer (used)

www.machineseeker.com/2-106-65.html
Used Dickte SAC, further information will follow shortly... 2.500 EUR ... Thickness Planer, Thicknesser Huefner & Soehne 63 ... Thicknessing machine Sicar S 500... Working width: 500 mm Working height: 200 mm 2 speeds 2 Table rollers manualtable lift 4 knives - Safety shaft. ... Thicknesser mitTersawelle SAC RS 53Missing: my

Woodworking Planers - Southwest Machinery & Equipment


Dec 14, 2015 | Masonry Tools

1 Answer

New blades for powerbase planer


'Guest' is looking for help with a Powerbase planer - giving him instructions for Makita and DeWalt is hardly likely to help!

I too have a Powerbase and need to find the manual - anyone?

Aug 05, 2012 | Tools & Hardware - Others

1 Answer

Searching - user manual for Wadkin BAO/s planer thicknesser


www.machines4wood.com

I Also have a BAO 12 and im trying to find out about the starter as i need a new one. But the company above have a copy which i am ordering. His name is Ben Thatcher.

Hope this helps Rob

Dec 02, 2009 | Tools & Hardware - Others

1 Answer

Dewalt DW733 Bench top thickness planer How to change blades ?


OK you need to go to Dewaltservicenet.com and in the middle of the page at the bottom type in your model number it will take you to another page and then find your type number and click on the instruction manual section on the right side, I clicked on type 2. This manual is about 30 pages long. Let me know if you still need help and if I have helped could you please rate the answer accordingly. Good luck

Apr 16, 2009 | Dewalt Tools & Hardware - Others

1 Answer

Help i need to change my Dewalt DW733 Planer Blades i lost manual


try dewaltservicenet.com They have manuals as well as parts breakdowns.

Apr 16, 2009 | Delta TP300 Shopmaster 12-Inch Portable...

Not finding what you are looking for?
Masonry Tools Logo

Related Topics:

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Masonry Tools Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Tom Chichester

Level 3 Expert

34690 Answers

ray gallant

Level 3 Expert

44225 Answers

Are you a Masonry Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...