Question about Panasonic PT-53TW53 53" Rear Projection HDTV-Ready Television

1 Answer

Panasonic PT-53WX52F Color blue adjustment

I have a Panasonic PT-53WX52F HDTV Dec 2002 model. The color blue isout of adjustment I tried to adjust the color with the cross adjustments but the blue is way off what could be the problem and what is the fix.

Posted by on

  • 1 more comment 
  • catgofetch Jul 18, 2008

    my tv is stuck on zoom the picture is so stetched the picture is expanded. plus the converge is so off.

  • hkphooey1 Feb 09, 2009

    I just ordered the convergence chips mentioned above and Sonny at ServiceManuals Inc was extremely helpful. They also have a generous return policy and include step-by-step instructions so you don't need to buy a manual. I'll post the results once complete.

  • Anonymous Mar 13, 2009

    is there adjustments on the green lens to help withe the pic

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Panasonic Master
  • 8,617 Answers

Most likely the two convergence Ics need to be replaced. They are STK392-110 you can get replacements at the following link with free instalation instructions with pictures.
http://servicemanuals.vstore.ca/

Posted on Jul 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

PT-47WX53G. TV got moved. Unable to move blue


The convergence ICs have failed which is very common when the set has been moved as a wek IC wont allow the color to be moved. You can get the PT52WX53G convergence repair kit from www.tvrepairworld.com which is the correct one for your model. The kit contains the parts and the CD with repair instructions.

Apr 10, 2010 | Panasonic PT-53TW53 53" Rear Projection...

1 Answer

Very blurry picture all of a sudden


sounds like you convergence generator is gone out, when this happens it is common for one or more of the colors to go out of alignment and not able to adjust, or hold the adjustment. typical cost for this type of repair at a shop is $250-450

Mar 27, 2010 | Panasonic PT-53WXD63 53 in. Rear...

2 Answers

Panasonic pt43lc14 no red color. picture is good. cannot get anything to look normal color after trying to adjust color/tint/picture etc. Have alot of blues and yellow, and brown. seems like no red.


It appears that your light engine is broken, I have the same problem. Have you recently changed the bulb with a non-panasonic part bought on the internet. I did this and think thats what caused the problem. I believe the new bulb burn at a higher temp thus causing damage to the Light engine filters

Jan 04, 2010 | Panasonic PT-43LC14 43" Rear Projection...

1 Answer

Picture changes to green


adjust color if you are not success reset color adjust

Sep 10, 2009 | Panasonic PT-53TW53 53" Rear Projection...

2 Answers

Panasonic PT-52LCX16 DLP TV color problem


This is a very common failure on Projection TV sets.
  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.

You can see some example photos and find a solution here...
http://www.fixya.com/support/r2861627-updated_convergence_problems_amp

Apr 26, 2009 | Panasonic PT-53TW53 53" Rear Projection...

1 Answer

Color problem with Phillips 53" projection tv


Bet the fluid is bad. You can take the back off and look into the green and blue lens. See if the picture is clear. If cloudy the fluid is bad. Be careful when doing this. Changing the fluid should be done by a tech.

Sep 09, 2007 | Panasonic PT-53WX54 53" Rear Projection...

3 Answers

How to adjust picture on projection tv


i have a 52" rca projection , and the screen looks like this ") (" on the sides can i do something to straiten it back out?

Aug 28, 2007 | Panasonic PT-53TW53 53" Rear Projection...

2 Answers

Color guns out of alignment


It sounds to me like the convergence amps themselves have failed. Ic7001 and Ic7002, both are STK392-110 Sanyo built Ic's and not an expensive job for a qualified shop. When shopping around for a shop to repair it ask what they charge for replacement of the convergence amps in this unit. And take the unit to them to save pickup and delivery charges...
Have a great day!
Bill

Dec 21, 2006 | Panasonic PT-53WX53 53" Rear Projection...

Not finding what you are looking for?
Panasonic PT-53TW53 53" Rear Projection HDTV-Ready Television Logo

Related Topics:

741 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Josh Whitehead
Josh Whitehead

Level 3 Expert

1146 Answers

The Knight
The Knight

Level 3 Expert

68352 Answers

Are you a Panasonic Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...