Question about Kodak (844-5074) Print Server

1 Answer

I have a kodak 5052 wireless printer which my computer will not recognize. I have tried everything that I can think of to get the computer to talk to the printer to no avail. The printer is connected to my wireless network. What is the problem?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 111 Answers

Normally you'd have a disc that came with the printer. It not only has a driver on it, which you may or may not need, but... it also will have a program for the computer to configure the printer for you.

You will probably find that the first time you need to connect to the printer with a cable FIRST to do the actual setup. That sets up the connection, printer wireless name, etc, and adds the printer to your list.

Then once that's all done and you disconnect the cable and reboot everything, once the printer comes on it looks for the router/hub, then you generally have a green light there indicating it's connected. Then you can print or do a test page from the computer.

If you don't have that disc, you should be able to download it from the manufacturer's website in Support and/or Downloads.

Good Luck!

:o)

Posted on Jan 02, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printer give a paper jam error when there is no paper in the machine


Hi, thank you all for your replies & sugestions. I think I've tried everything now apart from talking to Kodac and cleaning the paper sensor. Where do I look for the sensor ?. I've had the top cover off & can't see anything.
Many thanks.
Steve

Mar 27, 2016 | Kodak ESP 5250 All-in-One Printer

1 Answer

I have a Kodak ESP C310 all in one printer, when i first got this printer there were no problems with printing with wireless laptop. I think I have tried everything to get this printer to work. This...


You can try updating / reinstalling your Wireless driver. Might help - might be a waste of time. If you have already done, this doing it again and again won't help --Please call me to discuss more +1888-655-2655.

Jun 01, 2017 | Office Equipment & Supplies

1 Answer

I just bought A Kodak esp 3250 series AIO printer. I can print from computer, copy and all that but whenever I try to scan to computer or even preview scan I get a error saying :An error occurred while...


Try a new USB cable. Scanners require bidirectional communication with the computer and thus can fail when printer itself works. (If you use a print server or USB hub, try a direct connection.) Also try changing USB ports.

Another thing to try is to remove the TWAIN driver and reinstall it. This requires the original software CD from Kodak.
1. From your computer desktop, click Start > Run. (In Windows 7, type run in the search box then click on Run.)
2. Type %windir%, then click OK.
3. Double-click twain_32.
4. Right-click Kodak, then select Delete.
5. Insert the KODAK All-in-One Printer Software CD into the appropriate drive, then go to D: > printer > scanner.
NOTE: The CD is indicated by D: above. The CD drive may be a different letter on your computer.
6. Double-click aioscannr.msi, then follow the instructions to remove it.
7. Go to D: > printer > scanner, then double-click aioscannr.msi, and follow the instructions to install the file.
8. Open Home Center Software:
a. Select Scan Documents and Pictures.
b. Scan a document.

Unfortunately, if the error persists, the scanner may need service. Contact Kodak: http://www.kodak.com/go/contact .

I hope this helps.

Cindy Wells

Jan 06, 2011 | Kodak ESP 3 Multifunction Printer/ Copier/...

1 Answer

I have a laptop with built in wireless- i want to connect my kodak esp 5210 printer to it. so far i have searched for printers on the wirless search device button and it cannot find the printer, i can...


I think you may find that, as in my HP Printer, the Wireless through my laptop has to talk to my Broadband Router which in turn talks wirelessly to my printer.
You are right, wireless and WI FI are slightly different standards.

Nov 02, 2010 | Computers & Internet

3 Answers

Kodak ESP 7 WIFI problems


The ACTIONTEC GT124, M1000 and PK5000 Routers are not compatible with wireless-enabled all-in-one printers. These routers cannot connect to your all-in-one printer because they do not support the multicast protocol. Contact your router supplier for additional assistance and to determine if your router will be able to support the muticast protocol in the future.

Feb 26, 2010 | Kodak ESP9 All-in-One w/USB Cable & 4x6...

1 Answer

Going from wireless to USB install


Turn the wireless radio off on the printer so that it is not connected to the router. 1. go to menu-wifi settings and turn it off.

Kindly Go to kodak all in one home center software and click on connect your Kodak printer. select through usb cable and click on next. printer drivers will be installed. go to control panel-printers and faxes and set the printer to default you are ready to go my friend.

Apr 06, 2009 | Kodak ESP 5 Printer

1 Answer

Can't get computer and printer to communicate


Make sure the wireless LAN of your computer is set to AdHoc mode if the Printer is set to that function.

Mar 11, 2009 | Office Equipment & Supplies

1 Answer

Won't come up on printer list


make sure that your printer is being recognized by your computer. to ensure that go to device manager
click on start and then run(XP) for vista click on start>programs>accessories>run then type devmgmt.msc
the device manager will come up
look for other devices you might have unknown device or eastman kodak company if not then go to universal serial bus controllers. for troubleshooting sake, unplug all devices except from your mouse and keyboard look for usb composite device or usb printing support. if you have a wireless mouse or keyboard u might see 2 usb composite device. uninstall the composite device, unplug the printer and plug it back in. then let the computer recognize it. let me know what happened! good luck!

Apr 27, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

Not finding what you are looking for?
Kodak (844-5074) Print Server Logo

313 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Computers & Internet Experts

kakima

Level 3 Expert

102366 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

14534 Answers

Barry Boyd

Level 2 Expert

101 Answers

Are you a Kodak Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...