Question about Toshiba 35A44 35" TV

1 Answer

The demo display for showing tv adjustments controls, will come on by itself and continually repete itself and never shut off. Tried unplugging the set for several minutes to reset it. Open to any suggestions, we really like the tv. Great picture.

Posted by on

  • 2 more comments 
  • builderbob20 Jan 02, 2011

    yes we have tried turning off the demo display and this had no effect.

  • builderbob20 Jan 02, 2011

    also, the sound volume sometimes does not work at all, either on the remote or the button on the tv.

  • builderbob20 Jan 02, 2011

    Sorry i did know that you replied back. We have tried turning off the demo mode many of times. Sometimes it works for a few minutes but most of the it just does not work at all.

  • builderbob20 Jan 03, 2011

    Yes it would be nice to see if we can fix this tv , before i get rid of it. So if you can provide an explanation of what the problem might be and possibly fix it, that would be greatand happy to pay.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 342 Answers

Have you tried to go into the menu and check if the demo mode is off? if not refer to your user manual and see if that will help you

Posted on Jan 02, 2011

  • 2 more comments 
  • Ryan Nguyen
    Ryan Nguyen Jan 02, 2011

    The tv might be doing this because of a setting is turned on inside the menu if it is that then go into the menu and turn demo mode to off

  • Ryan Nguyen
    Ryan Nguyen Jan 03, 2011

    the demo mode can me removed by going into menu or pressing a certain key combination because those i have never experienced before so i will have to look into this further

  • Ryan Nguyen
    Ryan Nguyen Jan 03, 2011

    if you accept to pay me i will work with you further to resolve this issue it might even be that there is a issue with the programming that the factory has put in one tv i have seen did that and it turned out to be that a logic board component has gone bad

  • Ryan Nguyen
    Ryan Nguyen Jan 03, 2011

    please feel free to email me when you are in need but your thing keeps showing a timer for the premium and i do not know why my email is



    custserv.compuparts@gmail.com

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tried to reset DMPBD79last step it shut off it wouldnt turn back on I just get a blinking redlight.


This is for a diff. model but give it a try, they may be diff. #'s showing up then what pops up on screen then is listed below.

  1. Remove any disc from the drive and switch the device to stand-by
  2. Press and hold [OK], [BLUE] and [YELLOW] simultaneously on the remote control until the device turns on and shows "00 RET" on the display
  3. Repeatedly press [RIGHT] on the remote control until the device shows "08 FIN" on the display
  4. Press and hold [OK] on the remote control for at least 3 seconds -> The device will reset itself to factory condition and show "HELLO" on the display
  5. Press [POWER] button on the remote control -> The device will shut down

May 02, 2016 | Panasonic Televison & Video

2 Answers

Magnavox Demo TV


Could you please provide the model number of your TV?
It appears that the TV demo was activated by accident.

Jul 23, 2008 | Philips Magnavox 27MS343S 27" TV

1 Answer

My Samsung tv continues to do display demo features on the left side of the Tv


Go through the menu or program on the tv screen until you see where to turn off demo

Oct 16, 2013 | Samsung BN59-00851A Remote Control

1 Answer

Older magnavox - TR2510C101. The TV store advertisment is all it will display. Says "This should be your next TV, etc." Will not shut off or respond. We have to unplug it.


The tv is in the demo mode. To get it out of the demo mode, try this:
Press and hold the VOLUME UP and VOLUME DOWN front panel buttons at the same time. This will take the TV out of that demo mode.
Hope this helps

Jan 28, 2011 | Televison & Video

1 Answer

Hi - I just moved and when I hooked up my 2003 Panasonic SC-AK100, it stays in 'demo' mode and won't shut off completely...after showing "goodbye" and apparently shutting off, it comes back on...


http://www.retrevo.com/support/Panasonic-SC-AK100-manual/id/356ag917/t/2/

Page 12:

A demonstration of the display is shown if you have not set the clock.

You can reduce the power consumed in standby mode by turning it

off.

During standby mode

Hold down ['square icon'/-DEMO] until "NO DEMO" is displayed.

Every time you hold down the button:

NO DEMO (off)↔DEMO ON (on)

To show a demonstration of the display
Hold down ['square icon'/-DEMO] until "DEMO ON" is displayed.

Jan 16, 2011 | Panasonic SC-AK100 CD Shelf System

2 Answers

The unit turns on by itself


keep pressing display demo button for sometime.it will show no demo and you're done

Aug 03, 2009 | Panasonic SC-AK78 CD Shelf System

1 Answer

Magnavox MODEL # HD1905 C121 CHASSIS # 19E604-00AA SERIAL # 43468127 My Magnavox is stuck in a demo mode. I cannot turn the power on or off, and NONE of the buttons work, nor does the...


on the set press and hold the up and down volume buttons together till the tv turns off then press power to turn back on and everything should be fine

Jun 10, 2009 | Philips Magnavox 20MS3442 20" TV

3 Answers

Insignia LCD TV won't recognize computer input...


Heres the dealyo.
Click start button
Click control panel
Click display
Click settings
adjust screen resolution (probably have to go down) until the tv displays your computer
if this did not work, you will have to adjust bit rate from 32 to 16. Fiddle with the settings until the magic happens.
You will not get any sound unless you use an audio jack plugged into t.v.

Im here all week

May 20, 2008 | Televison & Video

2 Answers

Turns itself on


Hey there, you actually need to press the Stop /-DEMO Button when the device is doing the demo mode...it will take about 8 seconds and it will display "DEMO OFF" and turn off. This procedure needs to be run everytime there is a power failure OR you unplug it from the wall.
Pressing the Stop /-DEMO while it is on will cause it to start the demo while it is running!
Regards, Joel

Feb 23, 2008 | Panasonic SC-AK200 CD Shelf System

Not finding what you are looking for?
Toshiba 35A44 35" TV Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...