Question about Polaroid FLM-323B Television

1 Answer

No TV picture until tVhas warmed up - Polaroid FLM-323B Television

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Polaroid Master
  • 1,208 Answers

Definitely a bad capacitor in the power supply. Search and you shall find this capacitor. I have not repaired this particular model, I already know the problem. You will have to determine your power supply board and there you find this bad capacitor. You will need an ESR meter to find this cap and there may be another one near this one that will need replaced as well. Thanks for asking and show a few hands of support!

Posted on Jan 02, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Partial picture frozen


Hi Robert
Possibly bad video memory.
LSI Chip failure until warms up.

Feb 24, 2014 | Sony BRAVIA KDL-52X2000 50 in. HD-Ready...

1 Answer

LCT TV picture blurry with black smudges until it warms up


No easy way short of monitoring with a scope and or voltmeter, based on age of set I would first "look" at all the filter caps in the main power supply--bad ones when they get hot can regain some function:


12_10_2012_3_40_01_pm.jpg12_10_2012_3_40_21_pm.jpg

Dec 09, 2012 | Televison & Video

1 Answer

When you turn the tv on it goes to the settings screen and you can't get a picture for about 20 minutes until it warms up


Fist is contact Philips to see if this (with the model number) is a known issue or if there is a software upgrade available for this set.

Apr 08, 2012 | Televison & Video

1 Answer

I have a Hitachi 50GX49B, when I turn it on red light on panel comes on, but no picture or sound. 4 weeks ago picture would come on, but would break up and dissappear until warmed up, this took about 2-3...


if you bang on the TV or try kicking the very center bottom of the tv and it works or flickers you got a loose solder connection somewhere on the board. I got the same problem. When it warms up the solder, around what ever pin it might be, makes better contact. I am looking into the problem and will post my finding when i figure it out.

Sep 02, 2010 | Hitachi 50GX49B 50" Rear Projection...

1 Answer

TV picture is unstable until the TV warms up. This is taking longer and longer. Picture gets large, small, large, small... Quality is also lacking until it is warmed up. This is a Phillips 60'' Is this...


What model and brand is your television?
Is it a CRT type or DLP?
If picture is getting smaller then larger, and its a crt rear projection television sound like you have bad connections around the Flyback transformer and or horizontal circuits. This usually happens when a connection is made on the circuit board and the picture returns to normal especially during a cold start, but as the television warms up the connections on the board start to seperate and the problem starts occuring or it could be in the reverse process. Unstable at first then when tv gets warm it make better connections. All in all have a technician check the HV section of your deflection board.

Sep 29, 2009 | Televison & Video

1 Answer

LG 32LCD LCD TV Problem


It turn out to be a $10 diode on the mainboard, which cost me $100 to have troubleshot and repaired

Jan 19, 2009 | LG 32LC2D Television

1 Answer

Picture won't come in clear until TV "warms up" for 15 minutes or more


Change the capacitors first per the instructions in the link below. Symptoms could be anything from high-pitched hum to no picture at all. On these defective models, I would start at the caps and work back. It won't hurt to replace them anyway.

http://www.fixya.com/support/r741402-polaroid_flm_373b_lcd_tv_black_screen

Aug 28, 2008 | Polaroid FLM-323B Television

1 Answer

Tv picture is shakey


Bad capacitors on Hyper module = no longer available, but
can be rebuilt by PTS Corp or a qualified tech...........T.

Feb 13, 2008 | Toshiba 42H81 42" Rear Projection...

Not finding what you are looking for?
Polaroid FLM-323B Television Logo

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73647 Answers

matt martin
matt martin

Level 3 Expert

1208 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

Are you a Polaroid Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...