Question about Kenmore Washing Machines

1 Answer

MY LOCKING MECHANISM WENT OUT AND I ORDERED A NEW ONE AND PUT IT ON CORRECTLY. I UNPLUGGED IT TO MAYBE RESET IT. MY DOOR IS CLEAN OF ALL DIRT AND DEBRIS BUT I AM STILL GETTING 2 ERRORS F14 AND DL F AND IT WON'T LOCK OR DO ANYTHING. HELP ASAP THANK YOU TONYA

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,998 Answers

EEPROM Error
The Central Condrol Unit (CCU) receives it's data from an EEPROMonboard the CCU. If there is an error reading this data, it will cuse this error.

  • A power glitch may cause this error. Try unplugging the Unit for two minutes to see if that fixes the error.
  • Check CCU
this is what the f14 error code is recheck all the wires that you plugged in the door assembly too as well as recheck allthe wires on the control board any further questions message me back and please remember when our chat is concluded to rank how this opinion has helped fdl or dlf is a door lock error check this wires that you plugged into the new assembly Thanks again Rick

message me back if you have any further questions Thanks

Posted on Jan 02, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Self cleaning


There is a SAFETY INTERLOCK, if you opened it then locked... Is that what you said? It can not clean if the door is not locked.

If you unplug the stove and this will give it a reset. but you may have done some mechanical damage that you will have to inspect to see what it is doing. Is the Locking handle working properly? Is anything jammed ? Ect... Look at the Mechanical components first...

Mar 01, 2014 | Frigidaire Ovens

1 Answer

LG WD1470FD won't open


You will need to replace the door lock assembly. If remove the top, you can reach down and manually open the door. Below is a video to show you how to replace the lock. Here is the lock to order.

Dec 04, 2012 | Washing Machines

1 Answer

Whirlpool aqua steam 6 door won't open tried resetting, cleaned out filter can you help ?


We had the same problem. Mechanic had to come and replace the lock. Took him less then three minutes to open the door, remove the old lock and put a new one in.

Jun 30, 2012 | Whirlpool AQUASTEAM 9559 WASHER FOR 220...

1 Answer

Washer wont start with all panel lights on


usually unplugging it will reset the ECU ( main control board ). is the door lock operating correctly? i have seen them do that if he door look isnt functioning correctly. the owners manual might be helpful if you can find it or maybe download it from maytag site.

Sep 17, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Automatic sliding door does not close correctly every time. It stays slightly ajar. Local mechanic told me it is out of alignment, local Nissan dealer told me I need a new motor. I think the local mechanic...


The first thing to do is clean out the track the door is running in with a rag from dirt and foreign matter then lighly lube the track like put some wd 40 on a clean rag and wipe it in the track,also spray wd 40 or equivilant in the latch area.

Aug 05, 2009 | 2004 Nissan Quest

1 Answer

Lock for self cleaning cycle in the on position


unplug the stove, then force the mechanism back with a screwdriver

Jul 22, 2009 | Ovens

1 Answer

Accidently started clean, food inside,hit cancel,can't open


you would have to disassemble the cook top in order to get the the locking mechanism to manualy unlockit

May 01, 2009 | Kenmore 40494 / 40495 / 40499 Electric...

5 Answers

Frigidaire stove door locked


I've had a similar problem - door is locked. If the door is open - locate the light switch and hold it in for a few seconds. Sometimes it makes a noise and resets the lock. Otherwise, push the Clean button and the Cancel button on front of oven simultaneously and hold for about 30 seconds. The ?locked? light should disappear. If it is working, you?ll hear a mechanical hum as it resets.

May 10, 2008 | Frigidaire PLEF398AC Electric Kitchen...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2180 Answers

fordexpert

Level 3 Expert

5520 Answers

Ed Mac

Level 3 Expert

731 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...