Question about LG WM2277H Front Load Washer
UE means Unbalance Error.. Check your machine legs and ground level properly.. And the main think is dont put a single blanket.
Posted on Feb 14, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: ue error code on the display
For "ue" an unbalanced load is sensed three times, re-adjust your load in the machine.
For e1, it could be a water sensor problem. Check to see if the inlet valve is okay and not clogged, water shd be in good pressure. If this is okay, open up behind after taking the plug off the wall. There is a thin tube coming from the switch area to the outlet pump area; disconnect this from the top carefully and blow into it, it should be free; if it is clogged you will hav a water level problem. Unblock and refit carefully.
Posted on Nov 25, 2007
SOURCE: LG WM 14316FD washing machine
An UE Error Code is indicative of a “Unbalanced Error”. This indicates that the drum is not spinning in a smooth rotation. It may be necessary to rearrange the load in the drum. I found this answer on the lg web site.
Posted on Dec 14, 2008
This is an Imbalance code. Your issue may be with:
Posted on Aug 08, 2009
SOURCE: error code UE
UE Refers that the Unit is Unbalanced. Take out the clothes out of the washer and then Run the washer. Does it Spin?
If yes, then it might be Unbalanced Load. Try to Load Small Clothes. If not, or if the Error is Appearing again and Again, Control Board or the Sensor is at Fault. You cannot Test the Control Board or the Sensor but usually Sensor is the Common Problem with Most of the LG Washers.
So, First Change the Sensor. If Problem Persists, Change the Control Board. On Most Models, Sensor would be Located near the Front of the Unit on the Side of the tub.
Let me know, if needed further assistance.
Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!
Posted on Dec 26, 2009
UE is Imbalance error..Redistribute the load or you may have tried to wash something which will not 'spread' enough to balance the load...Nomess
Posted on May 18, 2010
Tips for a great answer:
Oct 31, 2017 | Dishwashers
Jan 21, 2016 | Kenmore Washing Machines
May 15, 2012 | Washing Machines
Jun 29, 2011 | Samsung WF337AA Front Load Washer
Jun 29, 2011 | Samsung Washing Machines
Feb 12, 2011 | Samsung Washing Machines
Dec 03, 2009 | LG WM-2077C Front Load Washer
Nov 04, 2008 | LG Washing Machines
Sep 23, 2007 | LG WM1814CW Front Load Washer
1,544 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: