Question about Philips 42PFL5603D - 42 IN. LCD HDTV

1 Answer

NEED replacement LCD, looked everywhere including TV repair shops but cant find one. Does anyone know where i can find one? Or some one that is looking to get rid of their tv for cheap so I can scavenge the LCD. Thank you for your help!!!!!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Philips Master
  • 1,210 Answers

To purchase a new LCD screen is too expensive and not cost effective. You are doing the right thing by searching. Unfortunately, these TVs are still new and finding a salvaged one will take time. The demand right now, for a salvaged screen is in much demand. You must be patient, and time will find one. You may may try the "Shop Jimmy" website. Or check out Encompass TV parts. Sometimes they may have a salvaged one...once again demand is high and the search continues. Just continue to be very patient. Yard sales , pawn shops and continue visiting your local TV shop for one. Good Luck and thanks for asking and show a few hands of support!

Posted on Jan 02, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a Westinghouse LCD tv and i lost the remote but in trying to run auto scan and it keeps telling me to press enter but I don't know how to


WESTINGHOUSE LCD-TV USER MANUAL Pdf Download.

www.manualslib.com > ... > Flat Panel TV > LCD-T
Westinghouse Digital 27'' Wide-Format LCD - TV User's Manual. ... the analog cable or TV antenna wire (not included) directly to this LCD-TV antenna input. ... a list of video sources using the SOURCE button located on top of the LCD-TV.
images for Westinghouse LCD tv enter button location

Sep 28, 2015 | Westinghouse Televison & Video

4 Answers

Need power supply model ad-13d-2 ultra 30" hdtv


d2d45c4.jpgHi!

If anyone would like a Power adapter for their Ultra LCD30-500 and LCD40-500 - please email me Acosta.cal@gmail.com... And I’ll be able to order one…



I too own a Ultra Lcd40-500 HDTV. Bought it from HSN.com back in 2006.

My power adapter burned out 2 weeks ago, and to my dismay PWW, or should I say POS has gone bankrupt.

I looked everywhere online and here in San Jose,CA thinking I would find a replacement or at least someone that could repair the blown capacitor( 630v vpmm), thermitors(IRFD460A) and varistor( SCK206).

After calling every power supply company, distributor, and retailer, had no luck finding a match to this crazy looking 9din pin adapter. Disappointed I gave up on a replacement and took it to various repair shops for repair and was told without schematic would be nearly impossible to replicate the power Output. Finally this one shop was able to replace the burned out components and it seem to work at the store. When I got home with it..no luck..red light would come on…but no light on screen. L

Not wanting to give up or trash my LCD. It was time to dig further…I did some research through my employer; a SemiConductor company here in Santa Clara, CA.

Needless to say this power adapter has driven me crazy….It has been exhausting... But finally just yesterday I got the break needed…I found a manufacturer in Taiwan that has these power supplies for both the Ultra lcd 30" and 40". I was told they only sell to Component or Electronic Suppliers. I’ve asked my employer to see if I would be able to order one on their behalf using their account.

Happy ending! My power supply is on it’s way. I was told it could take up to 4weeks for delivery. But I’m just glad to have a replacement.

Jun 08, 2009 | Ultra LCD30-500 Television

1 Answer

Need power supply model ad-13d-2 ultra 30" hdtv


Hi- I have brand new one in the box- call 978-374-9877
Ask for Tommy or Andy- We are one of the largest tv repair depots in the US-

Jun 08, 2009 | Audiovox FPE3000 30 in. HD-Ready LCD...

1 Answer

Colors dont line up and green is "dancing" all over screen


Your TV most likely has a Convergence Chip Failure ( common problem )

Here are some of the most common symptoms and example photos of a convergence problem

  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
701cb04.jpg
77ea520.jpg
f0900cb.jpg

2c07611.pngSolution #1

You need to replace the convergence chips and convergence resistors. Check the site www.TvRepairKits.com. They have put together convergence repair kits for most models.

The kits include a photo instruction guide, original OEM Sanyo STK chips, convergence resistors, pico fuses, thermal paste, etc. Everything you will need to do the repair yourself.

May 15, 2009 | Sony KP-57WS500 57" Rear Projection...

3 Answers

Ultra 40" LCD40-500--- Need power supply for this LCD TV--- see below for spec's


504bb0c.jpg

Hi!

If anyone would like a Power adapter for their Ultra LCD30-500 and LCD40-500 - please email me Acosta.cal@gmail.com... And I’ll be able to order one…



I too own a Ultra Lcd40-500 HDTV. Bought it from HSN.com back in 2006.

My power adapter burned out 2 weeks ago, and to my dismay PWW, or should I say POS has gone bankrupt.

I looked everywhere online and here in San Jose,CA thinking I would find a replacement or at least someone that could repair the blown capacitor( 630v vpmm), thermitors(IRFD460A) and varistor( SCK206).

After calling every power supply company, distributor, and retailer, had no luck finding a match to this crazy looking 9din pin adapter. Disappointed I gave up on a replacement and took it to various repair shops for repair and was told without schematic would be nearly impossible to replicate the power Output. Finally this one shop was able to replace the burned out components and it seem to work at the store. When I got home with it..no luck..red light would come on…but no light on screen. L

Not wanting to give up or trash my LCD. It was time to dig further…I did some research through my employer; a SemiConductor company here in Santa Clara, CA.

Needless to say this power adapter has driven me crazy….It has been exhausting... But finally just yesterday I got the break needed…I found a manufacturer in Taiwan that has these power supplies for both the Ultra lcd 30" and 40". I was told they only sell to Component or Electronic Suppliers. I’ve asked my employer to see if I would be able to order one on their behalf using their account.

Happy ending! My power supply is on it’s way. I was told it could take up to 4weeks for delivery. But I’m just glad to have a replacement.

Mar 16, 2009 | Televison & Video

1 Answer

32'' Winbook Lcd Tv bad main board


eBay: Find WINBOOK LCD TV CONTROLLER BOARD 6870C-0060F in the Electronics


I located this board at anewparts on ebay, hope this helps you also



"Q"


'Til the Wheels Fall Off!!

Dec 26, 2008 | Televison & Video

3 Answers

Ultra 40" LCD40-500--- Need power supply for this LCD TV--- see below for spec's


b199d53.jpg


Hi!

If anyone would like a Power adapter for their Ultra LCD30-500 and LCD40-500 - please email me Acosta.cal@gmail.com... And I’ll be able to order one…


I too own a Ultra Lcd40-500 HDTV. Bought it from HSN.com back in 2006.

My power adapter burned out 2 weeks ago, and to my dismay PWW, or should I say POS has gone bankrupt.

I looked everywhere online and here in San Jose,CA thinking I would find a replacement or at least someone that could repair the blown capacitor( 630v vpmm), thermitors(IRFD460A) and varistor( SCK206).

After calling every power supply company, distributor, and retailer, had no luck finding a match to this crazy looking 9din pin adapter. Disappointed I gave up on a replacement and took it to various repair shops for repair and was told without schematic would be nearly impossible to replicate the power Output. Finally this one shop was able to replace the burned out components and it seem to work at the store. When I got home with it..no luck..red light would come on…but no light on screen. L

Not wanting to give up or trash my LCD. It was time to dig further…I did some research through my employer; a SemiConductor company here in Santa Clara, CA.

Needless to say this power adapter has driven me crazy….It has been exhausting... But finally just yesterday I got the break needed…I found a manufacturer in Taiwan that has these power supplies for both the Ultra lcd 30" and 40". I was told they only sell to Component or Electronic Suppliers. I’ve asked my employer to see if I would be able to order one on their behalf using their account.

Happy ending! My power supply is on it’s way. I was told it could take up to 4weeks for delivery. But I’m just glad to have a replacement.

Oct 18, 2008 | NEC MultiSync LCD4010-BK TFT 40" Flat...

1 Answer

THE OUTER EDGES OF THE PICTURE ARE BOWED .


Projection TV sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the video to look normal. When its out of alignment the video will look 3D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the TV menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.

This is a very common failure on these projection sets and a fairly simple DIY fix. All projeciton sets including Samsung, RCA, Sony, Philip Magnavox, Panasonic, Pioneer, Akai, GE, JVC, Toshiba, and others at some point will have the same problem.

Common Symptoms include....
  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
  • TV shuts off after powering on. Power light will blink. TV may also make a chirping noise.
Here are some photos of convergence problems.

42d3683.jpg

7859b01.jpg

e87380c.jpg
Here is a quick test....

Using your original remote go-to the settings menu then goto the convergence section.

Try to adjust the red and then the blue convergence.

You should be able to move RED and BLUE in all directions - up, down, left, and right. And you should be able to get the grid straight.

If you can't move them in all directions or cant move them far enough your convergence chips are bad and should be replaced. This is a common problem.

Note: If you TV has as flash focus or magic focus button only try pressing the button. If it fails to fix the convergence your need to fix it. See below for a fix

69189a5.pngCONVERGENCE SOLUTION

You will need to replace the convergence chips and possibly some convergence resistors and pico fuses.
This is a a fairly easy DIY job if you are handy and can follow directions. You can get complete repair kits from TvRepairKits.com or click here. They have put together DIY repair kits that include the OEM parts and step by step photo instructions for each repair. If you are not handy or can't follow directions we would suggest calling a shop.

Jul 25, 2008 | RCA HD56W66 56" HDTV

Not finding what you are looking for?
Philips 42PFL5603D - 42 IN. LCD HDTV Logo

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74251 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...