Question about Husqvarna Sewing Machines

2 Answers

I have a huskystar 219. The feed teeth will not come up

Posted by on

  • 1 more comment 
  • cgefken_ande Jan 04, 2011

    I dropped my feed teeth and now they will not come back up. Is it the switching mechanism? Is it possible the free arm bed cover is the problem.

  • cgefken_ande Jan 04, 2011

    what do I need to do to fix this problem. Do I have to replace the cover? Did something fall off or break? It seems to run fine execpt for the grinding noise. If I lift the feet ever so slightly ( from underneath with the cover off) while turning the wheel the grinding stops. Thank you

  • cgefken_ande Jan 07, 2011

    switching mechanism does not seem to engage. The feed teeth dropped down but the switching mechanism will not bring them back up. How do I fix this problem? Have already done your previous suggestion. Feed teeth move freely with the cover off but will not stay up and are resting slightly on the metal part of the bobbin case, Causing a scraping noise.

×

2 Answers

You will need to clean the feed teeth and hook assembly area. Turn off and unplug your machine and then remove the presser foot, needle and needle plate. Use the lint brush that came with the machine to scrub out the feed teeth and hook assembly area.

Posted on Jan 05, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,382 Answers

Hi, you have to replace the feed dog. You can get a replacement on this LINK.....

Posted on Jan 04, 2011

  • Tunde Autos
    Tunde Autos Jan 04, 2011

    It is the switching mechanism....

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The feeder isnt feeding the fabric through


The length has to be above zero. Insure the bobbin wind is off.

Aug 02, 2016 | Husqvarna Huskystar 207 Sewing Machine

1 Answer

What is the price of Husqvarna Huskystar 219/224


I would try checking with a sewing machine shop in your area to see what their price is, I did find a 219 on ebay for less than $200.00,

Dec 07, 2014 | Husqvarna Sewing Machines

2 Answers

Huskeystar219 how to thread the sewing machine


here is a link for a manual or you can check youtube for a video
Viking Huskystar 219 224 User Guide

Aug 01, 2014 | Sewing Machines

1 Answer

How to correct huskystar 207 stuck in reverse?


Could possibly have the reverse feed checked by a professional - it is possible the machine got wet in the metal parts, and is rusted up or clogged up from too much oiling! NOT a quick easy fix

Jul 14, 2014 | Husqvarna Huskystar 207 Sewing Machine

1 Answer

Huskystar 219 224 type buttonhole


Attach the buttonhole foot. Then pull down the arm to interact with the foot. It is next to the presser bar to the left. Select buttonhole stitch. Start sewing. It should stitch all four sides in one step.

Oct 13, 2013 | Sewing Machines

1 Answer

How do I get the stitch selector knob off janome 307?


Hello, I have the Huskystar 219/224 sewing machine.
The foot does not go down.

Aug 02, 2013 | Sewing Machines

1 Answer

No info in the book for Huskystsr 219-224 for oiling it--HOW DOES ONE LUBRICATE IT??


Not sure if you want to oil the hook and bobbin area or the whole machine.
The hook and bobbin area is eazy, just put a drop of oil in the Hook. To do this just put a drop just under the bobbin Do this ever 2-3 bobbins and just one drop, not two.
To do the whole machine you will need to remove the panels and lubricate all metal on metal moving parts, but that is usaly done buy a sewing machine teck.

Mar 27, 2011 | Husqvarna Huskystar 207 Sewing Machine

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

179 Answers

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Derek Massey

Level 2 Expert

92 Answers

Are you a Husqvarna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...