Question about Casio FX-300MS Calculator

What make and model calculator?

Is the key you call "Yx" actually y-superscript-x? If so then that's the one.

Is the key you call "Yx" actually y-superscript-x? If so then that's the one.

Sep 17, 2014 | Calculators

It depends on the calculator.

**To enter the variables x or y**, look for an ALPHA key. Then find the key that has an x next to it. To enter x, you press ALPHA followed by the relevant key.

On some TI's TI30XII, there is a key marked [x,y, a, b,c]. You cycle through the available variables by pressing the key repeatedly.

However**if by the yx key you mean the universal power key** sometimes marked as [Y^x] then look for it under the markings [Y^x], [X^y] or [^].

As you might have guessed, knowing the calculator's model number helps us taylor the solution to your question.

On some TI's TI30XII, there is a key marked [x,y, a, b,c]. You cycle through the available variables by pressing the key repeatedly.

However

As you might have guessed, knowing the calculator's model number helps us taylor the solution to your question.

Jan 23, 2012 | Texas Instruments Calculators

The *yx *(where x appears as superscript to y) button will do this for you 5 [yx] 5 = 3125.

Feb 22, 2011 | Texas Instruments TI-30XA Calculator

enter the number you want to multiply by its-self, hit the yx button (the x is raised above the y), then enter the power that you want. For example: 5 yx 2 = 25

Dec 06, 2010 | Sharp ELW535 Calculator

The button yx (right under OFF) controls that.

For example:

To get the answer to "5 to the power of 4," you would press 5, then the yx button, then 4, and then =

And that should be 625.

To get the "4th root of 5" you would press 5, then the "2nd" button, then the yx button, then 4, and then =

That answer will be some small number.

For example:

To get the answer to "5 to the power of 4," you would press 5, then the yx button, then 4, and then =

And that should be 625.

To get the "4th root of 5" you would press 5, then the "2nd" button, then the yx button, then 4, and then =

That answer will be some small number.

Mar 29, 2010 | Texas Instruments TI-30XA Calculator

in the calculator put in 22, then press the YX key located above the divided sign. then hit enter. after that it the times button and put in 18 then the YX button and then 23. hit enter and there should be the solution.

Jan 17, 2010 | Texas Instruments TI-30XA Calculator

use like this : 2^3=8

i.e., for 2^3, press 2, then "yx" (beneath "OFF" button), then the power (3), then press =...

2 --> yx --> 3 --> = 8.

i.e., for 2^3, press 2, then "yx" (beneath "OFF" button), then the power (3), then press =...

2 --> yx --> 3 --> = 8.

Sep 15, 2009 | Texas Instruments TI-30XA Calculator

On the TI-36X there is no rooftop key, there is a yx key. This key is two keys below the on button. To use it, put the number in, press the yx key, put the exponent in, press the equal button.

Jul 24, 2009 | Texas Instruments TI-36 X Solar Calculator

6 Yx 4, where Yx is the button with a lowercase y followed by a small superscript x, denoting y to the power of x.

Here's the manual. Try page 6.

http://usm.maine.edu/math/120D/TI30xa.pdf

Here's the manual. Try page 6.

http://usm.maine.edu/math/120D/TI30xa.pdf

Jun 10, 2009 | Texas Instruments TI-30XA Calculator

Press 2

Press the yx key (just above the divide key and just below the CE/C key)

Press 5

Press the = key

This can be used for any combination... enter the number, then press the yx key, and the power you want to raise it to and then hit enter.

Regards,

Javabytes

Press the yx key (just above the divide key and just below the CE/C key)

Press 5

Press the = key

This can be used for any combination... enter the number, then press the yx key, and the power you want to raise it to and then hit enter.

Regards,

Javabytes

Nov 12, 2007 | Texas Instruments TI-30XA Calculator

42 people viewed this question

Usually answered in minutes!

×