Question about Vacuums

1 Answer

How to apply the belt on a kirby vacumn - Vacuums

Posted by on

1 Answer

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=759766
Generic problem for all Vacuums
How to apply the belt
Posted by wccles on Jul 09, 2008
How to apply the belt on a Kirby vacuum

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. The belt install on a Kirby is to raise the height adjustment to the highest level and then dial the belt off counter clockwise so it is loose and not on the fan pulley, release the top lever on the bell housing, then remove the bottom plate and unhook the brushroll on one side, slide the old belt off and then slide the new one on, replace the brushroll with the screws facing the carpet and re-hook the bottom plate on the Kirby. Then take the bell housing and hook that back on to the Kirby and lock it down. Then dial the belt on clockwise all the way and the belt should be on the fan pulley. The belt should be ready to go, plug in your Kirby and then do the step down on the vacuum height adjustment until the tone changes, then try to see id it picks up, if not go one more height adjustment and that should be the correct setting.

So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
http://kirby.com/
Customer Service – U. S. & Canada
1-800-494-8586
Hours 8:00 am to 5:00 pm (EST)
Mail To: Consumer Relations
The Kirby Company
1920 West 114 Street
Cleveland, OH 44102
Thanks, Don the Vac Man
Go Ahead. Use Us.

Posted on Jul 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can u put a video on how to put a belt on a Kirby vacumn


Try this YouTube video: http://youtu.be/At7tqnjD-Kc

Mar 01, 2015 | Kirby Vacuums

1 Answer

How to put a belt on silver addition kirby vaccum cleaner


The following site has videos for changing belt on the Kirby vacuums. It should apply to your. Much simpler and better than just a written reply.

http://www.kirby.com/portals/0/videos.html

Sep 23, 2010 | Vacuums

1 Answer

The on/off switch on my kirby g-3 vacumn needs to be replaced I would like to know the best procedure.


Get the parts ... locally or at some place like Repairclinic.com then set aside a Saturday afternoon in a quiet place with screw driver, pliers and a box of band aids and go to it.

Repairclinic.com will also provide you with details of the actual procedure at hand.

That is what I think

a

Oct 05, 2009 | Kirby Generation 3 Bagged Upright Vacuum

1 Answer

I need to get a manual for my kirby heritage II vacumn cleaner


User guidelines will be very similar to newer models unless you need something very specific to your model which is not likely. HERE are some printed manuals as well as free online manual.

Nov 21, 2008 | Kirby G4 Bagged Upright Vacuum

1 Answer

REPLACING BELT KIRBY CLASSIC III


http://geeksquad.fixya.com/ThreadView.aspx?prdid=11562&thid=806061
REPLACING BELT KIRBY CLASSIC III
Posted by JETALBOT on July 19, 2008
I CAN'T REPLACE THE BELT ON THE CLASSIC III (KIRBY). CAN YOU HELP ME? ELAINE
Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. The belt install on a Kirby is to raise the height adjustment to the highest level and then dial the belt off counter clockwise so it is loose and not on the fan pulley, release the top lever on the bell housing, then remove the bottom plate and unhook the brushroll on one side, slide the old belt off and then slide the new one on, replace the brushroll with the screws facing the carpet and re-hook the bottom plate on the Kirby. Then take the bell housing and hook that back on to the Kirby and lock it down. Then dial the belt on clockwise all the way and the belt should be on the fan pulley. The belt should be ready to go, plug in your Kirby and then do the step down on the vacuum height adjustment until the tone changes, then try to see id it picks up, if not go one more height adjustment and that should be the correct setting.

http://kirby.com/
Customer Service – U. S. & Canada
1-800-494-8586
Hours 8:00 am to 5:00 pm (EST)
Mail To: Consumer Relations
The Kirby Company
1920 West 114 Street
Cleveland, OH 44102
Thanks, Don the Vac Man
Go Ahead. Use Us.

Jul 19, 2008 | Kirby Heritage II Vacuum

4 Answers

Belt


I don't know where near you, but most local repair shops should have the belts for kirby.

Jun 18, 2008 | Kirby Generation 3 Bagged Upright Vacuum

1 Answer

What hose gets hooked up for upholstery cleaner. The one that usually goes in front? I cant get my vacumn to turn on.


Hi!
You need to take the power nozzle off and attach the thing that looks like a little plastic "cup" with two hooks and a screen on it. This is the intake guard. Attach it to the front. Now remove the cloth bag and put the hose on the hole where the bag was. You'll have to line the arrow on the hose up with the notch on the Kirby and push the hose arm toward the Kirby until it pops on. (if the hose isn't all the way on, the vacuum will not run) If you need to, lube up the edges of the hole with a wee bit of vaseline or hand lotion. This makes the hose engage easier. If this didn't help, I have mnauals available.
http://stores.ebay.com/CLICK-HERE-FOR-GREAT-DEALS_KIRBY-OWNERS-MANUALS_W0QQcolZ4QQdirZ1QQfsubZ7656839QQftidZ2QQtZkm
Hope this helps...
Marci

Jun 02, 2008 | Kirby Ultimate G Bagged Upright Vacuum

1 Answer

Kirby heritage 2 sweeper


http://reviews.ebay.com/CHANGING-THE-BELT-ON-A-KIRBY-G3-G4-G5-GSIX-ULTIMATE-G_W0QQugidZ10000000003720039
the above link shows you how to change the belt on the g-series kirbys but it will apply to the heritage edition as well...the only difference is the color...some of the arrows may be missing on the front belt lifter knob...but they are little differences...

hope this helps!!!

Feb 06, 2008 | Kirby Heritage II Vacuum

Not finding what you are looking for?
Vacuums Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

D. Floyd Kolb
D. Floyd Kolb

Level 3 Expert

43501 Answers

Are you a Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...