Question about Kidde Nighthawk Combo Gas/co Detector

1 Answer

Our gas alarm is still in arranty but beeps 3 times about every minute, whats wrong please?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 134 Answers

If it's less than 7 years old it's probably just a weak battery. Have you replaced it recently? What is showing on the display? If it reads "Lb", replace the battery. If it reads "Err" and is indeed in Warranty, call Kidde at 1-800-880-6788 to obtain Warranty service. *Disclaimer: I am not a lawyer, despite the handle. Words to live by: "Every creative act results from a sudden cessation of stupidity." -Edwin H. Land, inventor of the Polaroid Land Camera "The problem can always be solved with the materials in the room." -My college Physics Lab Instructor

Posted on Jan 31, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am trying to gain entry to my Hyundai Elantra 2001model I have lost key fob if I use key it will set off alarm please advise


you can get the key to override alarm by just turning key to ON position and leave it that way for 1-3 minutes alarm will slow down and beep a few times then silent. turn key off wait 5 seconds then start engine

Sep 28, 2017 | Hyundai Cars & Trucks

1 Answer

How do I fix the continuous beeping coming from my refrigerator?


LG Fridge Door Alarm ' Chris Inch

www.chrisinch.com/blog/articles/show/lg-fridge-door-alarm/
Aug 30, 2006 - It's just too bad I can't live with beeping noises going off every 30 seconds. .... took them a long time and they scratched the paint) the fridge beganbeeping ..... I opened the fridge door to let the alarm sound and then located the alarm..... I can't tell you how many times I've "snapped" since hearing this thing.

FIXED Frigidaire Professional Constant Beeping - ApplianceBlog

www.applianceblog.com/.../17546-Frigidaire-Professional-Constant-Bee...

Jan 15, 2010 - 10 posts - ‎3 authors
The refrigerator is not refrigerating and I don't here the fan go on or ... the water comes out from the water dispenser and so does the ice. ... Thank You so much! ... The unit is two years old from time of purchase. ... Then to install it you remove the #81 screws here: 11-Controls parts .... All times are GMT -6.

Fisher & Paykel fridge in alarm - Kitchen - Home - Whirlpool

forums.whirlpool.net.au > Home > Kitchen

WhirlpoolJan 24, 2010 - I push the selector button to mute the alarm and then it may not do it again ... I can determine the fault code through the number of beeps/flashes? ... myfridge started beeping every 6 hours abut a week ago. ... posted 2012-Aug-7, 3:17 pm.... If so, defrost the coils behind freezer, you can use a hair dryer to ...

Feb 03, 2016 | Refrigerators

1 Answer

I have model kn-cob-lcb-ca...it does not have a digital display, it was made in 2009..a few nights ago it started beeping...4 beeps, 5 second pause then 4 beeps continuously..the manual says this is a...


send the detector back and have it replaced,
The CO sensor will not alarm to levels of CO below 30 ppm and will alarm in the following time range when exposed to the corresponding levels of CO: 70 ppm CO Concentration 60 - 240 minutes 150 ppm CO Concentration 10 - 50 minutes 400 ppm CO Concentration 4 - 15 minutes The alarm shall include a piezoelectric horn that is rated at 85 decibels at 10 feet. When the unit detects carbon monoxide, the alarm pattern will be four (4) short beeps - followed by five (5) seconds of silence - followed by four (4) short beeps. The unit shall incorporate 2 LED's. A green LED will be illuminated to indicate the alarm is operating properly when plugged into an outlet, and will flash every 10 seconds when on backup battery power. A red LED will flash to indicate that carbon monoxide has been detected until the device is reset or CO is eliminated or will flash to indicate low battery or alarm malfunction. The unit shall at a minimum meet the requirements of CAN/CSA 6.19-01. It shall also include a 10-year manufacturer's limited warranty or

Test/Reset Button - Tests the unit for proper operation. Resets the carbon monoxide alarm.
• Tamper Resist Feature - If activated, unit goes into constant alarm mode if it has been unplugged or has come loose from the outlet.

Sep 20, 2011 | Kidde Nighthawk Combo Gas/co Detector

1 Answer

How do you turn off the HWS alarm on a makita bmr100


A beep tone will activate when selecting the HWS buzzer
alarm.
The alarm beep will become shoter and shoter every
15 seconds for one minute followed by one minute silence
before repeating the cycle.
The HWS alarm will sound for one hour until turning off by
pressing the Power button. Press the Power button whilst
the alarm is activated will cancel the alarm for 24 hours.
1. The HWS buzzer alarm can be set either radio is on or
off.
2. Press and release the HWS buzzer alarm button
, the symbol will flash.
3. During the symbol flashes, long pressing the
button for more than 2 seconds followed by a beep
and display Hour digit will flash.
4. Rotate Tuning Control to select required alarm hour,
then press time set button again. The minute
digit will then flash.
5. Rotate Tuning Control to select required alarm minute,
the press time set button again to complete HWS
buzzer alarm setting.
6. Press and hold down buzzer alarm button for
more than 2 seconds followed by a beep to switch on
or off the HWS buzzer alarm.
Display will appear when buzzer alarm has
been set.

May 25, 2011 | Car Audio & Video

1 Answer

Code 266 and 263, alarm sounding


This is urgent to check immediately - From what I can tell in the manual you are having high levels of CO detected. This is the parts per million reading in your home. See page 6-3 in manual - this the link - -
http://www.detectorsandalarms.com/images/pdf/Manual_KN-COEG-3_900-0113en.pdf


On page 4-2 it says:
If the alarm sounds for carbon monoxide:
1) Operate test/reset button;
2) Call your emergency services ( fire dept. or 911);
3) Immediately move to fresh air - outdoors or by an open
door/window. Do a head count to check that all persons are accounted for. Do not reenter the premises nor
move away from the open door/window until the emergency services responders have arrived, the premises
have been aired out, and your CO and Gas alarm remains in its normal condition.
4) After following steps 1-3, if your alarm reactivates within a 24 hour period, repeat steps 1-3 and call a qualified
technician to investigate for sources of CO from fuel burning equipment and appliances, and inspect for
proper operation of this equipment. If
problems are identified during this inspection
have the equipment serviced immediately.
Note any combustion equipment not inspected by the technician and consult the manufacturer's instructions,
or contact the manufacturer's directly, for more information about CO safety and this equipment. Make sure
that motor vehicles are not, and have not been, operating in an attached garage or adjacent to the residence.
! WARNING:
Actuation of your CO and Gas alarm indicates the presence of
Carbon Monoxide (CO) or explosive Gas which can KILL YOU.
PHONE NUMBER
PHONE NUMBER
When the CO and Gas alarm senses a dangerous level of CO, the unit will emit a loud alarm pattern and display the concentration
of CO in parts per million (PPM). The alarm pattern is 4 short beeps - followed by 5 seconds of silence - followed by 4 short
beeps repeating. (Note: When the unit is disconnected from the 120V power supply and is on battery backup, the alarm pattern will
continue for the first 4 minutes after detecting CO and then the cycle will repeat every one minute). Know how to respond to a CO
or Gas emergency. Periodically review this user's guide and discuss with all members of your family.
4-

Oct 03, 2010 | Kidde Nighthawk Combo Gas/co Detector

1 Answer

Freezer stopped working, all temperature lights gone off


there is a wrong connection at the compressor.

Feb 19, 2010 | Freezers

1 Answer

Alarm keeps beeping, reads 0


Try testing it first. Press the test/reset button. If it's operating properly on the display:
"GAS" - and it should beep 3 times. Then a number should appear on the display. It should be arround 200. Then it should beep 4 quick times, then nothing for 5 seconds, then 4 quick beeps that keep repeating. It will then show 3 numbers again for a few seconds. When they're gone it will be done resetting. It should show a flashing red light and a 0 or whatever the reading might be. Try this and let me know what happens. If this fixes the problem please rate as fixed. If not, please don't rate yet. Let me know what's going on and I'll be more than happy to help. Thanks.

Apr 15, 2008 | Kidde Nighthawk Combo Gas/co Detector

1 Answer

How to set alarm and ring with radio?


Hi gidgid.
This is direct from manual mailed to me from Oregon Scientific re my own contrast problem.
1. Press [ALARM] to switch to display the alarm setting.
2. Select ALARM 1 or ALARM 2 using [ALARM].
3. Press and hold [ALARM] for two seconds.
4. Use VOLUME [ + ] / [ - ] to enter the hours.
5. Press [ALARM].
6. Use VOLUME [ + ] / [ - ] to enter the minutes.
7. Press [ALARM].
8. Use VOLUME [ + ] / [ - ] to select ALARM or RADIO. If
ALARM is selected, a two-minute crescendo alarm will be
emitted at the set time when the alarm is active. If RADIO is
chosen, the radio will be turned on for two hours at the set time
instead.
9. If RADIO is chosen, use [STATION] to choose the radio
station and press [AM / FM] to select AM or FM.
10. Press [ALARM].
11.Use VOLUME [ + ] / [ - ] to set the volume of the wake up radio.
12. Press [ALARM] to exit.
Note: If there is no battery for the radio, there is no operation for
step 9 ~ 11.
sleepy head

Jan 13, 2008 | Oregon Scientific RRM112 Clock Radio

Not finding what you are looking for?
Kidde Nighthawk Combo Gas/co Detector Logo

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kidde Home Security Experts

Cindy Wells

Level 3 Expert

5479 Answers

yadayada
yadayada

Level 3 Expert

80608 Answers

Brad Brown

Level 3 Expert

17328 Answers

Are you a Kidde Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...