Question about Rowenta Steam Generator DG050 Iron

1 Answer

No steam comes out of iron

My steam generator is filled & hot, but no steam comes out of the iron when I squeeze the handle to steam.
appreciate your help
Jan

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 70 Answers

Hi, there is probably a something broken in the moulded plastic trigger assembly (there is a plastic broken finger that actuates a micro-switch under the rubber handle cover). If you are so inclined, use an orange stick and gently pry up the rubber handle cover on either side from the front to the rear cord end to access, inspect and troubleshoot. I am in SoCal and use the California Electric website to obtain parts or go to the Rowenta home website to locate useful manual information, PDF reader and dealer near you.

Posted on Jul 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What can be done about leaking steam?


ensure your iron steam button is not set into perminent steam function. leaving the iron with the point of the iron pointing upwards should reduce steam to the handle. also the iron may need to be descaled to ensure any steam switch funtion is not stuck in an on position.

May 12, 2014 | Euro-Pro Steam Generator EP8001 Iron

1 Answer

Issues with Rowenta Steam Iron DG 05030 steam hose


Does your iron have a self cleaning feature? It sounds to me like you have calcium build up and when you squeeze the hose it displaces the "clog" just enough to allow steam through.

Nov 12, 2012 | Rowenta Steam Generator DG050 Iron

1 Answer

I have a hinari steam generator iron and the steam has stopped coming through the iron and now coming through the base that the iron stands on!can anyone help please


Check the water reservoir of the steam generator and look for some hairline cracks. Also a clogged tubing will likely to go back water on reservoir inlet water pouring. Once you found the cracks, seal it with epoxy just enough to fill the cracks.
Thanks for asking.

Jul 13, 2011 | Rowenta Steam Generator DG050 Iron

1 Answer

How to empty water form iron when finished


Unless you are not going to use the iron for a long time, especially if you use distilled water to fill your steam iron, I would really not bother.
However, if you do want to empty the iron after using it, you have a couple options:
- With the iron still hot, very carefully, use the cleaning function or the 'shot' of steam until no more steam is generated above the sink preferrably.
- With the iron unplug/NO electricty: very carefully tip the water out from whe filling hole above the sink - be aware that the water will remain extremely hot for a long time so avoid splashing water on yourrsel!
Hope the information is useful.

Sep 23, 2010 | Black & Decker D2030 Iron

3 Answers

No steam. I pressed the steam button on the underside of iron handle and no staem.


There 's a leaked capacitor in the circuit board. You just have to replace it and it works again.

Please visit the following page for detailed instructions:
http://thechipfreak.blogspot.com

Jan 15, 2010 | Rowenta DG5030 Iron

1 Answer

I have an elitech steam generator iron but water does not get hot so no steam (iron works fine)


I have had this iron for 5 months and only been used 4 times. When I turn it on , there is water leaking out of the iron and the handle is too hot to touch after a few minutes

Dec 28, 2009 | Irons

1 Answer

Rowenta Powerglide 2 INOX vertical steam, no steam, just water leakage


replace the o-ring gasket on the tank fill cap. It is a simple neoprene "O" ring you can buy at your local hardware or NAPA aauto parts store for less than $3.00.
st. louis mo Ralf

Sep 09, 2008 | Rowenta Steam Generator DG050 Iron

2 Answers

Tefal proline express steam generator iron needs de scaling


Make a solution of half water and half white vinegar. Fill up your iron and get it good and hot then let it sit a couple hours. flush out and repeat as necessary. Hope you find this helpful. Please give me a fixya rating If this works for you. It works very well as long as it is not completely filled with scale. Once you have it good and clean By a gallon of bottled water at the market and use that for your Iron and you will never have a scale problem again. I learned how to do this 20 years ago from a 80 year old woman from england. If it is really bad you can up the vinegar concentration but do not go higher than 2 cup to 1.
George

Jul 13, 2008 | Irons

1 Answer

Euro-Pro Steam Generator G6200H iron


Hi,

Here is a tip that will help you to troubleshoot your iron and figure out what is wrong with it.

Electric Iron not Heating Up or not Working Right
http://www.fixya.com/support/r5300202-electric_iron_not_heating_up_or_not

heatman101

May 18, 2008 | Euro-Pro Steam Generator EP8001 Iron

Not finding what you are looking for?
Rowenta Steam Generator DG050 Iron Logo

Related Topics:

743 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rowenta Irons Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Are you a Rowenta Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...