Question about Dryers

1 Answer

Push button to start dryer and hums for about 5 seconds and then nothing. This is a 90 series. Any help would be much appreciated.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Contributor
  • 239 Answers

I suspect your motor is faulty. The motor is available at http://aplusapplianceparts.com/searchquick-submit.sc?keywords=279827 and is accessed by removing the front panel. Instructions are included with the new motor. Use coupon code 1050 for a discount on your order!

Posted on Jan 02, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Kenmore 90 series gas dryer Model# 7691269076912 When I push the start button it whines then nothin. I used wait a few minutes and just start running. now you push the start button, it whines then...


Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor goingbad...

Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101

Oct 20, 2010 | Kenmore 77632 Gas Dryer

1 Answer

Kenmore 90 series... you push the start button and it hums but stops when you release the button and there is no movement with the tub


The infinity start button detent has broken.

Replacing the switch will get you up and running again.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Mar 01, 2010 | Kenmore Dryers

1 Answer

Press the start button on dryer, it hums but wont turn. With 2 people pressed the start button again, held the door switch, reached in turned the drum, it hummed stopped humming then no more nothing....


Sounds like a weak motor. You'll have to get a new motor installed. They are fairly inexpensive and easy to install yourself on that type of machine if you are handy. Motor is located in the bottom right of the machine, attached to the drum belt through a small pulley underneath the drum next to the motor.

Dec 27, 2009 | Dryers

1 Answer

Kenmore Series 80 Gas Dryer only Hums when start button pressed, but won't start


Hi, Does the dryer only hum when you push the start button?
Might be a bad motor.
Does the motor hum but, the drum doesn't turn?
Please let me know and get me a model # so I can assist you further.

Vic

Jun 01, 2009 | Dryers

1 Answer

When I push the start button, the unit just buzzes or hums.


You have a broken drum belt. The hum you hear is the motor spinning at high speed.

Apr 21, 2009 | Maytag MDG2706A Gas Dryer

1 Answer

Kenmore 90 series won't start


You have a bad motor.
It must be replaced.

Mar 31, 2009 | Kenmore 73952 Gas Dryer

1 Answer

Kenmore Dryer 90 Series will start but suddenly stop...


Hello , Sounds like your motor is over heating , it will run until the sensor shuts it down from getting to hot , it is most likley because the motor is covered in lint and needs cleaned. Hope that helps.

Dec 30, 2008 | Dryers

1 Answer

Kenmore 90 series won't start timer ticks


Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor goingbad...

Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101

Dec 03, 2008 | Kenmore Elite HE4 Electric Dryer

1 Answer

Kenmore 80 series dryer, won't turn on


Thanks for the question When you push the start button was thera hum if there is a hum when you push start you need a new motor THanks for the question The appliance doc

Jul 18, 2008 | Kenmore 63942 Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Brad Brown

Level 3 Expert

15729 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...