Question about Samsung ML-2510 Laser Printer

1 Answer

Large irregular black smudge on every page. Fairly new rebuilt cartridge.

Posted by on

  • msaiken Jan 02, 2011

    What's a fuser? Is it in the cartridge or the machine itself?
    Is it an expensive part? Would it be difficult to install?
    Would it be better to just buy a new printer?
    I looked on the site you suggested, but could not figure how to find a Samsung fuser to price it.
    Thanks for your help---msaiken

  • msaiken Jan 03, 2011

    Thanks much--I think we will look into a new one. This part is quite expensive compared to the cost of a new printer. It would be difficult for us novices to install, and not completely certain it would fix it anyway, but thanks for helping us decide..

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,278 Answers

Hello.

Most common reason for this problem is the fuser.

One suggestion for the part (in the US) is:

https://www.encompassparts.com/webwiz/wwiz.asp?wwizmstr=WEB.SEE&partnumber=8003792

Their main link is: https://www.encompassparts.com/

I have never personally purchased from this source nor does FixYa recommend or guarantee. This is just one suggestion.

Hope this resolves your problem.

Posted on Jan 02, 2011

  • 1 more comment 
  • NinaE Jan 02, 2011

    Of, sorry. Thought the first link would get you there. It's printed around $60 - 70 (USD).

    Here's a link to show replacing the fuser in another Samsung printer. Should be similar for yours:

    http://www.samsung.com/us/support/suppor...

  • NinaE Jan 02, 2011

    Should read:

    Oh, sorry. Thought the first link would get you there. It's priced around $60 - 70 (USD). The fuser is a replaceable printer part. See if you can remove the existing fuser. Of course, you may decide it's not worth repairing.

  • NinaE Jan 03, 2011

    You are welcome. Thanks for using FixYa.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I fix my Samsung Multi-function laser printer which has started to print smudged pages.


try to stop the sheet just before it enters the fuser and see if the marks are on the paper already. if not then it has to be the fuser if they are them you have another issue.

Jan 15, 2015 | Samsung CLX-3175FN Color Laser All-in-One...

1 Answer

Have just replaced Black Toner on Epson aculaser c2800 and now repeated regular pattern of smudges on every page (8 columns and 10 smudges per page)


This is caused by the toner cartridges. The manufacturer change an internal component to save a few coppers and this is the result. Usually only happens when the toner cartridge is old and the 'foam roller' in the toner cartridge starts to get a bit 'sticky' - as happens with some types of foam when it ages.


Two cures for the problem

1. Change the cartridge - make sure it is 'fresh'

2 Find an old cartridge with the old type of foam roller (plain full width) and swap this and its support into the cartridge to replace the new (spiral foam) roller

Nov 02, 2013 | Office Equipment & Supplies

1 Answer

Just replaced black cartridge in my 2600n color laser. I have smudged about a half inch wide 2/3rds over the right of each page. It only smudges in black. I have recalibrated several times. Printed at...


If this just started after you replaced the toner cartridge, one would have to say that it is a bad toner cartridge.
Print something that smudges. Pull down the front cover and look at the cartridges. Pay attention to the top one(black).
Look at the drum on that cartridge. You should see the toner sitting there. Compare it to the other cartridges which should be clean.

Feb 08, 2011 | HP Color LaserJet 2600n Printer

1 Answer

Black Smudge of ink along top edge paper Brother Intelifax 2800


try cleaning the grid on the drum unit otherwise there could be some thing on the fuser preasure roller.

Jan 16, 2009 | Brother IntelliFAX 2800 Laser Fax

1 Answer

Small black circle smudges down center of printed page


try replacing the toner cartridge if that does not help it may need a fuser replaced

Jan 12, 2009 | HP LaserJet P2015dn Printer

1 Answer

Print is Smudged


you may try
1) clean the cartridge nozzles with dry soft paper
2) clean the cartridge carriage down side surface there might be bled ink.
3) check the cartridge up side there is the lable cover the ink refill hole is ok, no any lable stick there you need put stick lable there.

Nov 12, 2008 | HP PSC 1600 InkJet Printer

1 Answer

Color lines/dashes at top and middle of page when printing.


Amand321,

Your problem lies with the fact that you manually refilled your cartridges. This is not recommended by any technician I know and your solution is in the replacement of all your cartridges with genuine brother consumables. It is going to be expencive, but it is the only real solution.

Gremlin11

Sep 29, 2008 | Brother MFC-9420CN All-In-One Laser...

1 Answer

Printing Black Smudges


You could print a few more out and see if it goes away.

Check the drum and see if there are any black marks on it. If there is, it could be a scratched drum or the cleaning blade isn't working in it anymore.

Is this a new toner cartridge?

Be careful when you look at the drum at it to keep the light out of it as much as possible.

Where did it jam at?

Jun 13, 2008 | Samsung CLX-3160 All-In-One Laser Printer

1 Answer

Blank pages printing out/or smudged pages(new cartridge)


u have to take printer service center becase in your printer has a gare problem thats y he take more 2 or 3 pages one time or its clibatition is missed so u take your prinetr to printer repaire & solve this problem

Feb 26, 2008 | Lexmark Z615 InkJet Printer

1 Answer

BLACK SMUDGING


Hmm... This sounds like it is a toner problem. If your roller is getting too much toner then it just globs it onto the paper even though the drum is not asking for it. Are you using a new toner cartridge or a re-filled one? Is it from Brother or a 3rd party? I suggest you remove the toner cartridge and check inside the printer. Clean any spilled toner. Check the toner cartridge for leaks .. give it a good shake and see if it is leaking. If you have another toner cartridge, you can replace it to test. You may need to pint a few pages to see a change. Another test could be to print a few (2-5) "BLANK" pages. The printer should not be depositing any toner. If no smudge or the smudge stays the same, then the toner cartridge is the likely problem. If the smudge is there, but gets smaller, then clean your printer.

Good luck!

Jan 10, 2008 | Brother HL 2700CN Laser Printer

Not finding what you are looking for?
Samsung ML-2510 Laser Printer Logo

Related Topics:

221 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

HEMANT GROVER

Level 2 Expert

167 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...