Question about Numark Complete professional computer-DJ Control package w/Audio I/O & Software for Mac

4 Answers

I have a omni control that oi wish to coneect to my laptop to broadcast with virtual pro 7

Posted by on

  • 3 more comments 
  • george_hanks Jan 03, 2011

    WHAT I NEED IS: HOW DO I CONNECT MY OMNI CONTROL TO MY LAPTOP VISTA. (WHAT CABLES FROM WHERE TO WHERE). AND THE SETTINGS OF THE CONFIGURATIONS FOR MICS AND HEADPHONES FOR VIRTUALDJ PRO. THIS IS TO BROADCAST A WEB RADIO PROGRAM. tHE ASNWER GIVEN SAID NOHING ABOUT CONNECTIONS OR CONFIGURATIONS AND WAS VAGUE TO SAY THE LEAST.

  • george_hanks Jan 03, 2011

    Thank you for yourr advice. I have Parkinson's disease and have problems with a mouse because of the shaking. I am starting as a dj for our web radio in Belgium but don't know a lot about computers and the langauge which goe swith it. I need the virtualdj Pro 7 (bought and legal) to support my omni control which I know nothing about. Could you please explain what cables I need and where to connect my laptop (vista) to the control. Also what configuration do I use. I shall be using a profesional mic and headphone. For xample. " Input none - " outputs headphones master etc. soundcard........................................ Any othe rinfo you can give me will be much appreciated. George

  • george_hanks Jan 04, 2011

    Thank you for the info so far. However nobody has told or showed me how to connect a numark omni control box to a laptop. The only input is for the mic on the front and the slots at the back are output. I can play music and transmit it on our web radio but I cannot get the mic to work and broadcast my voice. I also have a TASCAM US - 122MKII. Can that be used to help matters? Thanks

  • george_hanks Jan 06, 2011

    You solved the problem in an indirect way. The answer is that the omni control will not work with the virtualdj Pro in order to broadcast on the web. I spoke on the phone to Numark Europe and a very helpful lady emlightened me. My solution was to connect my TASCAM with the headphone and micraphone, the tascam and control are connected to the USB ports on the laptop. The next provblem was to get the right combernation of soundcards etc in the vitualdj. All is now working and although you experts did not know the answer, I am satisfied with the attention I waas given.I would not hesitiate to use your services again and recommend it to friends,

  • george_hanks Jan 06, 2011

    The problem was solved because i was steered in the right direction. The experts did not know the answer but knew where to get it from. In this world it is not always what you know! it'''s who you know. I am pleased to have eventually got what I wanted and would not hesitate to recommend your services to my friends. Thank you for your perseverance and tenacity.

×

Ad

4 Answers

You will need to download the drivers and then connect the OMNI control to the USB port of your laptop.

http://www.numark.com/omnicontrol

If this does not get it working then click on this link to contact Numark tech support. Fill in the form with your question and they will get back to you with the answer:

http://www.numark.com/content54

Posted on Jan 05, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,932 Answers

Hi,
Watch the full video in below link.It shows how to connect it.
Part 1 http://www.youtube.com/watch?v=KOrSJuH8b7M&feature=related
Part 2 http://www.youtube.com/watch?v=z3S5bqh-l0o
Thank You

Posted on Jan 04, 2011

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,472 Answers

Once you got it connected to virtual pro 7 you just set it up in the settings.. If you have a valid copy of virtual pro there is a lot of stuff you can download on their website. I am assuming you are connecting it through USB. There is a lot of things you can do here is a link in regards to the midi mapper already set up for the unit.
http://www.virtualdj.com/forums/103722/Virtual_DJ_Plugins/NEW_Numark_Omni_Control_Midi_Map.html
Thank you and enjoy,
Lee

Posted on Jan 03, 2011

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 20 Answers

Snd quality : 1) low quality audio files 2) check audio wires/cables if connected?»¿ properly,try replacing them 2 c if it helps 3) check if there are any Electric wires over/beside Audio cables this might cause electric noise from powering other devices 4) you might have latency problems with ur pc so test 4 it. 5) make sure u close ALL programs when running VDJ 6) Dwnld asio4all and c if it help

Posted on Jan 02, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does RF CH mean?


What is the difference between a RF channel and a virtual channel? The RF channel is the channel that the TV station uses to broadcast its signal. Before the conversion to digital, TV stations were normally identified by their channel number, and most people knew that a particular network was on a specific TV channel. While analog broadcasting was being phased out and all TV stations were converting to digital broadcasting, it was necessary for the TV stations to continue to broadcast their analog signals on their original RF channels, and also broadcast their digital signals on a different RF channel. However, since the TV station used their broadcast channel as part of their identification, they wanted to keep using the same channel number. To allow this to happen, the new digital television broadcasting standards (ATSC) provided TV stations the ability to continue to use their original channel number and also tell the TV set to tune to the new RF broadcast channel when their virtual channel number was selected. The original channel number is called the virtual channel number, and it will be followed by a period and a second number (3.1, 7.1, etc.).
One of the benefits of converting to digital for the TV stations is that they now have the ability to transmit more than one program at the same time on the same RF channel. The number of additional channels they can broadcast is determined by the resolution of the program (SD vs. HD, text only, music only, etc.). The second number in their virtual channel number indicates that one of the additional programming sources from the same TV station is being viewed (10.2, 10.3, 10.4, etc.).
When selecting an antenna, it is important to understand the difference between the RF broadcast channel and the virtual channel. Antennas are designed to receive specific ranges of RF channels, and the antenna needs to be selected for the RF channel you wish to receive. TV stations broadcast in two broad frequency ranges, called VHF and UHF. RF channels 2 through 13 are considered VHF, and RF channels 14 through 51 are considered UHF. In order to pick up the channels, the antenna has to be designed for the correct frequency range. It is very common today to find that TV stations using virtual channels 2 through 13 are actually using RF broadcast channels in the UHF range. Although not as common, some TV stations using virtual channels 14 through 51 are actually transmitting in the VHF range. An antenna designed for only UHF channels will not work effectively for RF broadcast channels in the VHF range, and an antenna designed for only VHF channels will not work effectively for RF broadcast channels in the UHF range.

Apr 09, 2015 | Televison & Video

1 Answer

Windows 7 fargo printer drivers


There are no Windows 7 printer drivers available for the Pro-L printer. You may try using the original Windows XP driver if you know how to setup a virtual XP environment in Windows 7 Pro. This requires you to install the printer and the software that uses it inside the virtual XP.

Dec 04, 2013 | Office Equipment & Supplies

1 Answer

I need to download Microsoft Virtual WiFi Miniport adapter


kemar,
Click the link below to view the youtube video on how to turn your windows 7 laptop into a MS Virtual Wfi hotspot.
http://dell.to/13mQJV6
Thank You,
Dell-Jesse L
Dell Social Media and Communities

Jul 15, 2013 | Dell Inspiron 6000 Notebook

2 Answers

Fp3 player driver for windows 8


Unfortunately, your laptop probably has Windows 8 x64. Fisher Price never made drivers for any Windows 64 bit OS. If you had a 32-bit version of Windows, I'd suggest the Fisher Price Windows Vista and 7 software. It's available here: http://service.mattel.com/us/technicalproductdetail.aspx?prodno=K3420&siteid=27&catid=516 .

You could try upgrading to Win8 Pro and using Hyper-V to install a legal copy of XP 32-bit (if you can find one), then use the virtual copy of XP to connect to the FP3. (Windows 7 Pro and Ultimate offered Virtual PC with XP mode to get a copy of XP 32-bit without the expense of a licensed copy.) Otherwise, you need a computer with an older and 32-bit OS. However, 32-bit OS's are limited to a maximum of 3GB of memory.

I wish that I had better news for you.

Cindy Wells

Apr 21, 2013 | Fisher Price Kid Tough Fp3 Song Story...

1 Answer

How do i update my software


hi friend:
you can insert root to update if
if you need help ,we can send user manual to you
we sell samsung omni pro windows phone and Dreambox dm800

Apr 20, 2013 | Cell Phones

1 Answer

I have used PrintMaster 10 for a number of years on my old computer-XP. I recently purchased a new computer and wish to put the program on my laptop( Windows 7). I tried choosing the compatibilty method...


The only solution with this older software that will work is to use a computer (virtual, dual-boot, or true second machine) with an older version of Windows installed. If you have Win7 Pro or Ultimate (or are willing to upgrade to one of these versions), you can create a virtual XP computer for free. Download and install Virtual PC and XP mode from Microsoft. Install them in order. Then install the XP software in the virtual computer and it will work. (Other virtual computer programs are Parallels and VMWare.) All of the other options will require a licensed version of the older Windows OS. Please note that the virtual computer can't share files directly with the main computer. You'll need to save files to external or removable media (optical media or flash drive, for example) to share them. You can't have a printer installed on both the main computer and the virtual one at the same time. You will be asked to uninstall the printer if you try.

Your other option is to upgrade to PrintMaster Platinum 18.1, see http://www.broderbund.com/ for details, which is compatible with Windows 7. This will import your Printmaster 10 projects.


I hope this helps.

Cindy Wells

Apr 11, 2011 | Broderbund Print Master Silver 16.0 for PC

1 Answer

I have Mixtrack Pro and wanna make it work with virtual DJ. How can i make this happen??


Mixtrack pro captures the audio media to perform functionalities while virtual Dj perform the modifications requirements. usually, building the audio files requires an alternate prorgam than the adjustment modifications for broadcasting. The virtual DJ performs among several functions either as compartibility displays.

Feb 19, 2011 | Numark MixTrack DJ Software Controller

1 Answer

Usb


change your usb port or try another port of pc.
chasnge usb cable.

Mar 25, 2008 | HP Compaq Business d530 Small Form Factor...

Not finding what you are looking for?
Numark Complete professional computer-DJ Control package w/Audio I/O & Software for Mac Logo

Related Topics:

639 people viewed this question

Ask a Question

Usually answered in minutes!

Top Numark Computers & Internet Experts

Mike

Level 3 Expert

4340 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

aravind shet
aravind shet

Level 2 Expert

141 Answers

Are you a Numark Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...