Question about LG Televison & Video

1 Answer

Why can't I get a sound from the dvd on my lg388? The sound from vcr is in half speed. Picture is ok.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • LG Master
  • 6,993 Answers

Hello,

First, you need to do some sound troubleshooting. Check the volume of the DVD from the DVD remote (not TV), make sure it is set to highest. Also check the DVD remote and make sure mute is not activated.

If the above is intact, then the next to check is your audio connection. Check the back of the DVD, the red and white (left & right) RCA space is for Audio. It has to be Audio out. Connect the Audio out of the DVD to audio in of the TV and see if there would be sound. If there is still not sound, try all the red and white space at the back of the DVD. Also, check your Audio wire, make sure its not defective. A defective wire can debar audio.

If after trying the above and there is still no sound, then problem has to be from the internal part of the player. The Audio/Sound IC on the player's board maybe defective and maybe that's why there no sound.

Let me know what happens after trying the above.

Good luck.

Posted on Jan 02, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can not get picture when vhs is playing


This a typical symptom of a dirty video head. People get confused because there is no sound. You see most of all VCR's are designed to mute the sound till the picture is OK. So as soon as you clean the video head using a cleaning tape and get a good picture on the screen you won't get any sound.

Jul 06, 2011 | Philips Magnavox DVD/VCR Dual Player

1 Answer

Using a Sylvania DVR90VF, how can I record from a VHS tape to a DVD?


OK here's what the user manual has to say on it!
PS If you need the user manual I will E-Mail on request.

Prepare for the recording on the DVDRW/ R disc or the videotape. Make sure:• Insert a recordable disc and a videotape with a record tab.
Note for recording to a disc:
• Make sure that the disc is recordable.
1
Hit [SETUP].
Easy Setting Menu or Advanced Setting Menu will appear. If Advanced Setting Menu is displayed,
proceed to step 3.
2
Using [
K / L], select “Advanced Setting Menu”.
Hit [ENTER].
Advanced Setting Menu will appear.
3
Using [
K / L], select “Recording”. Hit [ENTER].
Recording menu will appear.
4
Using [
K / L], select “Dubbing Mode”. Hit
[ENTER].
Option window will appear.
Recording
Auto Chapter 10 minutes
Timer Programming
DVD-RW Recording Format Video mode
Auto Finalize
Dubbing Mode VCR DVD
VCR DVD
Recording
Auto Chapter 10 minutes
Timer Programming
DVD-RW Recording Format Video mode
Auto Finalize
Dubbing Mode VCR DVD
DVD
VCR
DVD-RW DVD-R
VR
DVD-RW
Video
Note
For VCR to DVD duplication:
• After starting VCR to DVD duplication, the picture may be distorted because of the auto tracking function. This is not a malfunction.
5
Using [
K / L], select “VCR DVD”. Hit [ENTER].
6
Hit [SETUP] to exit.
Make sure to select a recording speed using [REC SPEED].
7
Hit [PLAY
B].Then hit [PAUSE F] at the point you
wish to start recording.
• Since it takes about a few seconds before the actual dubbing begins, please allow extra 5 seconds
when selecting the starting point.
8
Hit [DUBBING].
VCR to DVD duplication will start.
9
Hit [STOP
C] to stop the
recording.
When you turn off the unit after setting the Dubbing Mode to DVD VCR, the setting will be set to VCR DVD automatically.
• Dubbing Mode is available only if the videotape or disc is not copy protected.
• You cannot change the output mode during VCR to DVD or DVD to VCR duplication.

For VCR to DVD duplication:
• The playback sound mode is followed by the setting of VCR playback sound mode on page 77. Set the playback sound mode to which you wish to record to the DVD.

May 12, 2010 | Televison & Video

1 Answer

We have a new vcr snowy


It seems that you need to take the new unit back for exchange, since you are using the same output for the vcr and the dvd and your dvd is giving you a good picture, the vcr is acting up and since it's new either exchange or repair will be needed.

Sep 01, 2009 | Philips Magnavox TS3260C 32" TV

1 Answer

Magnavox zv427mg9 sound problem - VCR/DVD combo connected to a Vizio VW42LFHD TV. After some playing around we got the DVD running OK. We can see video and hear the audio. However, the VCR does not play...


sr you can disconect hdmi cable and use a litle speaker and check for audio in rca cables output , when you put your vcr play you can have audio in rca red cable and rca white cable i think when you put hdmi your loose in rca the audio , remember in hdmi you have audio and video , if you dont have audio in vcr the audio head are bad thias is used only in vcr mode. good luck

Jul 08, 2009 | Televison & Video

1 Answer

I get sound but no picture from my DVD player.


Check if you don´t activate the progresive scan function or video sistem

Apr 23, 2009 | Samsung DVD-V5500 DVD Player/VCR

1 Answer

RE: My VCR & DVD Video Recorder The vcr part of it only plays in black n white ( there is a picture but not that great) and there is no sound. What could be wrong with it? Thank you so much!


Depending upon the make and model, bad capacitors on the head/drum assembly can cause this. If the heads do not lock at the correct speed, the picture may appear OK, but have no color. Please post the make and model so I can confirm this or attempt to provice more details.

Thanks,
Dan

Oct 08, 2008 | Televison & Video

2 Answers

Vcr


sound slike bad head on vcr side samsung makes new dvd vcr in one thats nice 79 on sale at circit city ok

Oct 06, 2008 | Philips Magnavox MWR20V6 DVD Recorder/VCR

2 Answers

Dvd player stuck in progressive mode


ok i got a solutioN!!!

ok go to ur actual dvd/vcr player (not the remote) and press and hole the STOP botton for like 5-10 seconds.
thank goodnesss!!!!!!!!!!!!

your welcome! :]]

Jun 11, 2008 | Zenith XBV243 DVD Player/VCR

1 Answer

No picture while playing DVD or VHS tape


Your unit has it seems to have developed a video problem. it could be in the video switching IC or the video processor. Its going to need a trained technician, who knows how to use an ocilliscope to find the video problem.. Good Luck

Aug 02, 2006 | Insignia IS-DVD1001 DVD Recorder/VCR

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Televison & Video Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

74383 Answers

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...