Question about MB Quart Car Audio & Video

6 Answers

Need help trying to locate.the Power and speaker plugs for Mb Quart RAA1000 monoblock 1975 Car Amplifier.

Posted by on

  • 3 more comments 
  • 727trendsett Jul 09, 2008

    The Amp was discontinued.So Crutchfield doesn't have the parts in stock.I have a wiring kit.Just need the Power and speaker plugs for Amp

  • 727trendsett Jul 09, 2008

    The speaker and power plugs were made by the company.They plug directly into the Amplifier.Amplifier can't be installed without plugs.

  • 727trendsett Jul 09, 2008

    I already tried contacting Maxxsonics.They couldn't help me either.

  • 727trendsett Jul 09, 2008

    I already tried contacting Maxxsonics.They couldn't help me either.

  • 727trendsett Jul 11, 2008

    I tried ebay also and found nothing.Thats were I bought it from.Seller listed it as is. Think I got screwed.They knew what they were doing.

×

6 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,665 Answers
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 19,396 Answers
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 788 Answers

Have you looked on eBay? Probably your best bet. I can't look for you from work as eBay is blocked but just search for the amp model and something should come up.

Posted on Jul 09, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 13,433 Answers

Here are the contact details

Maxxsonics USA, Inc.
1290 Ensell Road
Lake Zurich, Illinois
60047 USA
Phone: 847-540-7700
FAXX: 847-540-9776

Posted on Jul 09, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 417 Answers

They should be behind the cd player need to pull out and go from there

Posted on Jul 09, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

I am assuming you are referring to the actual connectors/plugs that are needed to wire the MB Quart RAA1000, a complete wiring kit is available here. It includes patch cord, power cable, grounding cable, turn-on lead among others.

If you want a pictorial layout of the wiring and connectors, the owner's manual would be of help and is available here.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Posted on Jul 09, 2008

  • Louie  Role
    Louie Role Jul 09, 2008

    Hi again,

    I understand. Have you tried getting in touch with Maxxsonics USA (MB Quart parent company Chicago, IL.)?

    Should you need:
    847-540-7700
    Technical Support
    Service & Sales
    Alternately, you perhaps you can try posting it here.

    Cheers.




  • Louie  Role
    Louie Role Jul 09, 2008

    If the original manufacturer could not provide the parts/connectors needed and there are none readily available, perhaps your options are rather limited to:
    1. look at eBay and/or repair shops for units identical to your model being sold AS-IS/defective but with the parts that you need; or
    2. hard wire extension wires with readily available connectors if your requirement is for the power and the speaker connectors.


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I wire a mb quart QXD 164 crossover to a kef kar kx3?


I would not recommend this.

Crossovers are designed with specific speakers in mind - they are not interchangeable, since the impedance (Resistance and Inductance) varies widely.

While this will not damage anything to try it, it will probably sound terrible as most people that have separates for the car audio are fairly particular about sound.

May 14, 2014 | MB Quart QSD 164 Car Subwoofer

1 Answer

I have an old soundstream reference class a 5.0 and a set of mb quart pwe 254 10 duel voice coil subs. i would like to know how to wire this set up for the most power. parrallel the voice coils then run...


The Soundstream Class A 5.0 will deliver its full power at 1 ohms mono.
I think your subs are two dual 4 ohm voice coils.
If you wire the voice coils for each sub in PARALLEL, that's 2 ohm for each sub. To get 1 ohm mono, you need to hook up the subs in PARALLEL to the amplifier, in bridge mode. That's the way to get to 1 ohm mono. Please add a fan to your setup as the amplifier will get very hot. You will need to use a relay to hook up the amplifiers and fan(s) to or you will damage the remote ouput of your HU (if you hook up the fan straight to the remote of the HU) as the remote output of the HU is not designed for the amount of current a fan draws.
Good luck. If you need help with the relay issue, have a look here: http://www.caraudiohelp.com/newsletter/multiple_amplifiers.htm

Jun 27, 2011 | MB Quart PWE-254 Car Subwoofer

2 Answers

I was thinkin bout buyin a planet audio ac2600.2 car amplifier but cant find what gauge power an ground wire it takes and how many watts it puts out 2 channel @2ohms rms. can you help?


Here are your specs. RMS 900 Watts Nominal and Max 1300 on 2 Channel @ 2 Ohms.
4 Gauge should do fine but if you like to feed the beast go with 2 gauge.
Looks like going rate is $110 on Amazon or elsewhere.
If it attains the RMS wattage it would be a good amp. I like monoblocks but
you will pay more. I looked into Tri-Mode and it is straight forward but people
are having problems figuring it out. With your 2 speaker operation you should
avoid the issues others are having.
Good luck and remember, rearview mirrors were meant to fall off!
Mine: JL 1800A monoblock into 2-JL 12" W3's in series for low bass 20-80 Hz; Lanzar Vibe 266 bridged into 2-12" Memphis in series for mid bass 40-200m Hz. 2 guage wire to mononblock-250 amp fused at battery, 4 guage to Vibe w/250 amp at battery.

Anarchy Series 2-Channel Car Amplifier
  • RMS Power Rating:
    • 2 ohms: 900 watts x 2 chan.
    • Bridged, 4 ohms: 1800 watts x 1 chan.
  • Max power output:
    • 2 ohms: 1300 watts x 2 chan.
  • Total Power Output: 2600 watts
  • Pulse width modulated MOSFET power supply
  • Convenient remote subwoofer control
  • LED power (green) and protect (red) indicators
  • Variable Bass Boost 0 to +18 dB
  • Bridgeable Tri-mode operations
  • Chrome-plated connections enhance durability
  • Variable high and low pass crossovers
  • Illuminated logo
  • 3-Way System Protection circuitry (thermal, overload, and speaker short protection)
  • Dual speaker terminals simplify the hookup of multiple speakers
  • Heavy duty aluminum alloy heatsink for extreme heat dissipation
  • Low level high inputs
  • Heavy-duty set-screw terminals
  • Input sensitivity:
    • Low level: 100mV-2V
    • High level: 2V-8V
  • Variable high-pass filter (45-90 Hz, 24 dB/octave)
  • Variable low-pass filter (50-500 Hz, 24 dB/octave)
  • Damping factor: >125
  • Signal-to-Noise Ratio: 102 dB
  • Frequency response: 20-20,000 Hz
  • Dimensions: 15-9/16"L x 10"W x 2-3/16"H
  • 1/0-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • 1-year Manufacturer's warranty

Mar 19, 2011 | Planet Audio Car Audio & Video

1 Answer

Hi i got two speakers clarion xw 1500 ,i`m looking for amplifier good quality and strong enought can supply power for two subwoofer speakers same time,please help me tomargos3@op.pl


The Clarion sub woofers that you have are 600 WATT RMS each, with a combined power handeling of 1200 WATT RMS. Your best option is buying a 1 ch Amplifier (monoblock) Anything in the region of 1000 to 1500 RMS will be more than enough. Brands that you should look at MTX, Phoenix Gold, Soundstream, MA Audio, Kicker, Hifonics, MB Quartz these are but few of the good quality brands out there in the mid to high end range.
If you are on a tight budget then a good alterrnative without a lot of compromise on quality versus cost then Quantum Audio, Crunch Audio, Kenwood will still do the job just fine.

If you are not restricted by budget. Zapco, Mcintosh, DLS and others are up there in the creme de la creme of car audio.
Another brand name that i have used that is not very well know (as far as i know) is Elemental Designs. They have a great monoblock amplifier that delivers all its power at 12V as oposed to most other brands needing 13.8V (V=Volts) and over, it is also suprisingly inexpensive for its quality.

I hope this helps you in the right direction.
Respectfully
dreamsystems

Feb 05, 2011 | Clarion XW1500 Car Speaker

1 Answer

What is the impedance and do they need a capactor on or is crossover built in?


Product MPN MPN RTC 19 Key Features Car Speaker Type dtrquestion.gif Component Car Speaker Function dtrquestion.gif Tweeter Size 1" Nominal Power Handling dtrquestion.gif 70 Watt RMS Technical Features Peak Power Handling 130 Watt Frequency Response 2500 Hz - 32 kHz Sensitivity 87 dB Impedance 4 ohm (Dual Coil)


please be advised you need the crossover that came with it, or you will need an active crossover dedicated to an amplifier to run these.

Aug 14, 2010 | MB Quart RTC 19 Car Tweeter

2 Answers

What are the specs,rms ect on my older mb quart psc 216 speakers


Any type of 4 channel amp that will allow the speakers to be hooked up at 4ohm. I would check your local walmart. The brand VR3 are made by Rockford fosgate as well as lighting audio. From what I have heard they are some really good amps at affordable prices. If you are looking to spend some money I would recommend a JL Audio e2150

Oct 28, 2009 | MB Quart Car Audio & Video

2 Answers

Car amplifier


HI PAL BUY MONOBLOCK AMP TO DRIVE UR SUB TRY GET ROCKFORD FOSGATE, KICKER,BMBOSCHMANN,OR INFINITY

Jun 03, 2009 | ElectroVoice EVM10DLX Car Subwoofer

1 Answer

Rca rc210bp subs


700 to 1000 watt two channel or monoblock amplifier.

May 30, 2008 | RCA RC210BP Car Speaker

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top MB Quart Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4732 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

64286 Answers

Are you a MB Quart Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...