Question about Husqvarna Designer I

2 Answers

Can't read my disk that I read in the sewing machine. Want to combine words and designs to put on my machine and embroider it.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

On designer I you can upgrade to a usb port and this will take care of almost everyones problems I have read.

Posted on Jul 04, 2014

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 201 Answers

What software are you using? You need to read the disk back to your PC in Disk Manager (VIP, 3D or 4D software) or use the input/output of Embird, if that is what you have. The disks that are used in the Designer 1 are not able to be read directly by a PC in Windows Explorer because they are in sewing machine language, not PC language. You can combine designs and lettering on the Designer 1 machine, without having to use PC software at all. Let me know if you need help with this.

Posted on Jul 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why won't my baby lock ellure plus read my USB stick....I copied a pattern from the internet ...it seems to have read the pattern but when I put it in the sewing machine it comes up P1/P1


You downloaded a toyota dst file. The babylock will embroider the design but it wont display the design or any picture or attributes. It will sew it, but try on scrap fabric first to be sure.

Aug 12, 2013 | Baby Lock Sewing Machines

1 Answer

How do you start embroidering a design where the thread breaks on a Bernina Artista 180 sewing/embroidery machine?


Most machines have a stitch counter, stitch forward and step back features. Check your manual and embroidery machine's screens for this.

IN case you have misplaced your manual I found this one for you. It's big so allow time to download.
http://www.itsastitchonline.com/mastery_on_the_web/Mastery_170_180_1-10-02.pdf

Sep 10, 2012 | Bernina Artista 180

1 Answer

Does the futura software from compucon allow you to wind the design forward so you can upload the design to the machine, and can continue embroidering the design to complete it. Reason why is had to...


You can skip color blocks that you have already embroidered. When you get to the one you were working on when the machine was turned off, send it to the machine and use the needle down button to advance the design to the point when you stopped. Then you can hit the green button and proceed.

Dec 04, 2011 | Singer CE-200 Quantum Futura Computerized...

1 Answer

I have a designer 1. recently when i go to embroider, it starts fine then just goes hay wire and put teh embroider all over the place- not like the pattern. Sound to me like the emb. unit? thanks kathy


Hi Kathy, I'm sorry your Designer 1 is not feeling well.8*( It sounds like to me you need to get your embroidery unit re-calibrated by your local technician. When was the last time you had your machine serviced? Are the designs you are trying to embroider stock designs or your own designs? Have you tried resetting your machine by turning it off and back on again and let the machine calibrate again? (Take the hoop off before you do this and put it back on after you have selected your design) and try it again. Also how old is your machine? They had a recall on Des 1 purchased between 1999-2004 for a power supply problem. The serial # and recall info is on the Viking website at- www.husqvarnaviking.com. Also do you have enough clearance around your machine where the hoop is not hitting anything while it's embroidering that will throw it of big time! Hope something here helps you! If I can help you further you can also email me at- kats2sew@hotmail.com Happy Sewing!! Kathy ( from 1 Kathy to another)

Nov 02, 2010 | Husqvarna Designer I

3 Answers

Spaceing between two words


for a sewing machine? that's a really good question.hmmmmm..

Mar 14, 2008 | Brother SE-270D Computerized Sewing...

2 Answers

Designer 1 embroidery problem


If the machine is reading the file to not be found it is probably that the designs are on the floppy but the person sending did not read them to the floppy right. they should have been read thru the softwear.

Dec 28, 2007 | Husqvarna Viking 1

1 Answer

Ebroidering two llines


I don't think you can do 2 lines of text in the computer of the machine. If you have a software program that allows you to do lettering, you can do 2 or more lines. I haven't found anywhere in the instructions that really helps with lettering stored in the machine. I purchased Embroidery Magic 2 for $98. It is a powerful little program for the price and comes with 5 fonts. Also does manual digitizing (which I haven't really figured out yet). Do you have PED Basic to downloand designs from your computer to an embroidery card? If so you can download many free designs and purchase lettering at very good prices on many sites. Just remember that lettering purchased from the web doesn't not mean it is a keyboard font and you will need to combine letters to make words (treat each like a separate design). Maybe this will help.

Dec 05, 2007 | Brother SE-270D Computerized Sewing...

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

165 Answers

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Husqvarna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...