Question about Watches

1 Answer

Hi, i received a Pulsar Chronograph watch for Christmas. The problem i have is that it stops when i wear it but works perfectly when i take it off however the second hand continues whether is is on or off. I dont know if it makes any difference but i have experienced a lot of static over the last few months e.g. touching car doors and other metal objects. This has never happened before with any other watches, or with watches i currently have apart from this one. Many thanks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,083 Answers

This is interesting, since my ex always said she couldn't wear the battery operated Pulsar watches, but that was years ago. Apparantly, the jeweler she bought it from said some people have electrolytes or chemistry in their system that somehow interferes with the battery controlled mechanism.
However, the static issue could be affecting it also.
I'm also wondering, if the watch isn't getting "flexed" just a bit, to physically affect the minute and hour hands or gear bezels.
Obviously, it or you aren't getting along, and it's too new to be going bad. Get and exchange or refund, since another one might not work for you.
Good luck, and hope this helps.

Posted on Jan 02, 2011

  •  Michael
    Michael Nov 02, 2011

    Try a new battery

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to an Expert (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My pulsar watch needs repair


call touch of gold
google the number

Nov 05, 2016 | Pulsar Watches

1 Answer

Pulsar Chronograph 100 m - The second hand on the left small dial (not the sweep second hand of the stop watch) has begun moving erratically. It appears to move for two counts and pause for three and then...


If your watch is solar powered the second hand performs this characteristic when it's in need of a charge. Try placing your time piece under a bright light for short time or in direct sunlight and see if this helps you with your problem.

Jul 21, 2011 | Pulsar Chronograph Watch

1 Answer

I have a pulsar chronograph 100m the time keeping seems to be ok but, the buttons for stop watch, when stopping the sec,1/20 etc hand are not returning to zero. can u help. richard


Hi,
Thanks for using Fixya.
Try this: pull out crown to the first click, then push and hold button at 2 o'clock. When the hand is adjusted to the desired time, push the crown back in.
If this do not work, do the same using the button at 4 o'clock.

Good Luck and have a nice day.

Apr 27, 2010 | Pulsar Watches

1 Answer

The timer on Pulsar watch does not line up at 12 when reset.


To set the timer hand on these models of Pulsar watches, do the following: 
Looking at the face of the watch, there are two buttons and a crown on the right side. The TOP button is Button "A". - The BOTTOM button is Button "B".
There are 3 positions on the crown: IN (#1), FIRST CLICK (#2) & SECOND CLICK (#3).
First, pull the crown out to the second 'click' position (#3) ... This is all the way out. (STOP THERE! Pulling harder will harm your watch! Don't try to pull past position #3!)
Push and hold Button "A" for two (2) seconds. The dial will sweep around to the 12 O'clock position. You can advance the timer while the crown is in position #3 (second click out) to reset it back to the default position. 
The manual says that if you pull the crown out to position #3 while the timer is measuring, the hand will reset back to the 12 o'clock position... I haven't tried that, so I can't confirm.

Jan 02, 2010 | Pulsar Chronograph Watch

1 Answer

How do i set the alarm on my pulsar chronograph watch?


http://www.pulsarwatches.com.au/files/instructions/137_1.pdf

Oct 20, 2009 | Pulsar Chronograph Watch

1 Answer

How to set alarm on Pulsar Chronograph 100M


See PDF here to solve this problem.
Wish Pulsar would have included this info with their watches!
http://www.pulsarwatches.com.au/manuals_pdf/121_1.pdf

Sep 23, 2009 | Pulsar Chronograph Watch

Not finding what you are looking for?
Watches Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18411 Answers

Ansel Alberto
Ansel Alberto

Level 2 Expert

248 Answers

yadayada
yadayada

Level 3 Expert

77202 Answers

Are you a Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...