Question about HP Compaq nc6000 Notebook

2 Answers

Hp compact nc 6000 not powering up

WHEN I PRESS THE ON BUTTON MY LAPTOP FAN STARTS AND BEGINS TO BOOT UP BUT AFTER A FEW SECONDS IT STOPS .
OCCASIONALY IT WILL BOOT UP AND GO TO WINDOWS AND BE FINE. THE GREEN POWER LIGHT IS NOT LIT WHEN AC POWER IS PLUGGED IN BUT IS WHEN IT DOES POWER UP. THE LAST TIME IT BOOTED UP I WAS ABLE TO GO INTO CONTROL PANEL AND LOOK AT THE POWER PAGE I DON'T THINK IT KNOWS WHEN THE AC OR BATTERY IS POWERING IT BECAUSE WHEN I DISCONECTED THE AC POWER IT DIDNOT CHANGE TO SAY THAT IT WAS USING THE BATTERYIT SHOWED BOTH.
THANK YOU

Posted by on

  • Anonymous Sep 20, 2008

    i have the same problem... help ASAP...

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have done some research and alot if not all of the nc6000 boards have this problem. You have to replace the board (99-150 bucks) if your not electronics savy to fix. Im trying to find the exact issue online to try repairing mine thats doing the same thing.

Posted on Oct 31, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Will your Laptop boot up normally using just battery power?

Posted on Aug 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have acer 7540 On restart have error 0211 key


Try this fix:-

This problem was on a Gateway NV52 running Vista Home Premium (64) and this is how it was resolved, with the help of their tech support:

1. Turn off computer and unplug power cord.

2. Disconnect all external devices

3. remove battery

4. press power button and hold for 10-15 seconds

5. plug power cord back into computer and press power button.

6. Check LED's and listen for power supply fan.

7. If LED's are on or power supply fan starts spinning, watch for boot screen

8. If computer begins to turn on, turn it off.

9. Reconnect battery and external devices.

10. Press power button and make sure computer starts.

Sep 22, 2014 | Computers & Internet

5 Answers

My hp compaq nc 6000 wouldnt start up, i press the power button on the laptop and can see the blue light and the orange ligth of wireless connection and power turns on can hear the fan starting but in 3...


In this case it is an windows problem you need to reformat your notebook. So that the windows have fresh copy. If the same things happen the problem is the RAM you need to replace the RAM.

Aug 10, 2010 | HP Compaq nc6000 Notebook

1 Answer

My compaq presario laptop keeps getting an error: 0211 keyboard error it says press F1 to resume or F10 to setup but neither one of them does anything when I push them. Can this be fixed?


Hi,

1. Turn off computer and unplug power cord.
2. Disconnect all external devices(open up the computer tower and then )
3. remove battery
4. press power button and hold for 10-15 seconds
5. plug power cord back into computer and press power button.
6. Check LED’s and listen for power supply fan.
7. If LED’s are on or power supply fan starts spinning, watch for boot screen
8. If coputer begins to turn on, turn it off.
9. Reconnect battery and external devices.
10. Press power button and make sure computer starts.

This should work....all the best

May 19, 2010 | Computers & Internet

2 Answers

I have HP 305W. When turns on the power, it stops within 5 scnds


sounds like your motherboard lost a control chip. that makes the power supply cycle off, when m/b doesn't send correct signals to continue boot.

Nov 27, 2009 | HP Computers & Internet

1 Answer

Ihave hp laptop model#ze4200 it wont boot nothing happens on pressing the on/off button. only the a/c charging ledflashes for a while and turns off after few seconds


Besides a really serious failure, there are a few things to try...Remove the laptop battery, then hold the power button down for 10 seconds. Plug the AC adapter in, and leave the battery out. If the laptop starts up, you could just have a battery issue.

Nov 16, 2009 | HP Compaq Motherboard

1 Answer

On my laptop the vent fan starts then stop and the power goes out


These machines have a terrible overheating problem! You will have to clean the fan opening and, put sylicon grease on the heat pipe and, heatsink that covers the cpu

Apr 04, 2009 | HP Pavilion dv9000z Notebook

2 Answers

I have a Gateway Mx6440 Laptop and et CPU FAN error upon boot. afte w while i try spinning th efan and it starts working, i belive it is the heat sink that is defective but where can i find the proper fan...


"Turn off computer and unplug power cord. <br>Disconnect all external devices. <br>Remove the battery. <br>Press power button and hold for 10 to 15 seconds. <br>Plug power cord back into computer and press power button. <br>Check front panel LEDs (lights) on bezel (front face) or optical drives and listen for power supply fan. <br>If LEDs are on or power supply fan starts spinning, watch for boot screen on monitor. <br>If computer begins to start, turn it off. <br>Reconnect any external devices. <br>Press the power button and make sure the computer starts.
Please save this steps and go through that. If in case you require further help, you need to contact Answers by Gateway department which is a paid support. The phone number for Answers by Gateway is 1.800-237-6483. Or please consider contact with a local technician for a detailed troubleshooting."
worked for mee!! good luck

Feb 22, 2009 | HP (158800-001) for Compaq Presario 1246,...

1 Answer

I have hp compaq nc 6000 the screen has not been showing anything i have on and off many times,please what can i do


Shut down the system, disconnect every thing you

can possibly disconnect and remove the battery.

Press and hold the power button for 15 seconds.

Reconnect A/C power and try to boot up.

If no change, remove the CD/DVD drive and if you

feel comfortable, the hard drive. Reconnect power

and try to turn on again.

If you still get nothing, remove and reseat the RAM.

If you get no power, remove the RAM and

reconnect power to see if you get beeps from the

system.

Let me know if you need to go further than this.

Honest1abe

Jan 14, 2009 | Computers & Internet

1 Answer

HP Pavilion N5470 problem (can use the Omni X3 mainboard)


press f11 or f10 when your laptop first turns on and maybe u can reset it

Sep 16, 2008 | HP OmniBook XE3 Notebook

Not finding what you are looking for?
HP Compaq nc6000 Notebook Logo

Related Topics:

390 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Tony

Level 3 Expert

2598 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...