Question about D-Link DIR-600 Router

1 Answer

I need to access the d link configuration page. while keeping the internet connected to the router i am plugging a cable to the laptop and to the router and entering 192.168.0.1 an error message is appearing. I also tried while unplugging the internet cable from the router. what am i doing wrong?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 89 Answers

Hi tkoleilat

If you want to access the router configuration page, follow the steps mentioned below:

If your IP starts with 192.168.X.X or 198.162.X.X then open internet explorer( http address box) and type 192.168.1.1 or 198.162.1.1 and it will prompt for User ID and password

Default User ID " Admin" or " Administrator"

Default Password " password " or " admin "

This will help you to access router page.

Note: To perform these steps you need to be connected via Wired LAN cable to Laptop and the main internet cable to be connected to router.


Thank you
gowtam1402@live.com
091-9916828137

Posted on Jan 02, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Belkin n50 setup as wireless access point


Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default admin password.
You can now configure the wireless settings to protect your wireless network and Internet from unauthorized access. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Feb 03, 2013 | Belkin Computers & Internet

1 Answer

How do I use my laptop as an internet source for my wireless router?


You Internet access is through the cable or DSL modem.
Connect your wireless router to the cable or DSL modem and then configure the wireless router with the wireless encryption settings. Then configure the wireless cards in the laptops with the router's encryption settings etc. This will then allow the laptops to connect wirelesslt to the wireless router and the Internet.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security

Mar 05, 2012 | Linksys WRT Computers & Internet

1 Answer

Am i being thick? does each provider have their own type of router?? im trying to connect a d-link 615 using virgin, help please? havent got the disc for router and cant access 192.168.01 to download...


You need to connect your D-Link to a DSL or Cable modem. The ISP usually provides this modem and the configuration settings for the modem so you can connect to the Internet. To test your Internet connection connect a LAN cable from your computer to the modem and then open a browser. If you can coinnect to the Internet then you can then connect the D-Link to the modem and configure the D-Link for wireless settings so you can connect your computer/laptop to the Internet using a wireless connection.

Connect a LAN cable from the D-Link to your laptop/computer'sLAN port, open the browser on your laptop/computer and enter the D-Link'sconfiguration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop withthe router's wireless settings.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Aug 06, 2011 | Computers & Internet

1 Answer

I have a Zyxel P660HW-T1 v2 and when trying to use laptop wirelessly, the internet connection keeps dropping. While connected to the router by ethernet cable, internet is fine. All was working fine until...


For that you need to change wireless channel type in router. You can also configure it with below method.
Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then click on wireless->wireless channel type to 3 or 6 or 11 then save settings and restart router. . Let me know if you need further assistance. Thanks for using FixYa.

Jun 22, 2011 | Zyxel Prestige 660HW Wireless Router...

1 Answer

Need to connect DI524 for wireless connection to internet


If you have a wireless router and it is connected to the DSLor cable modem then - To connect to your wireless router, the router needsits wireless settings to be configured with the SSID, encryption key etc., alsothe wireless cards in all the laptops/computers needs to be configured withthese router's wireless settings. Then the laptops/desktop computers cancommunicate with your wireless router and access the Internet via the DSL or cable modem.

May 16, 2011 | D-Link AirPlus DI-524 Wireless Router

1 Answer

We have cable internet provided by Virgin. I am accessing the internet by plugging the ethernet cable dirctly into my laptop rather than via my DI524. Have just read a post that says I have to be connected...


If you can connect to the internet using the Ethernet cable on your laptop then the cable modem is configured correctly.
If you want to connect to the Internet using the D-Link wireless router then first you need to configure the D-Link wireless settings and then configure the wireless card in your laptop with the D-Link's wireless settings. Remove the Ethernet from the laptop and connect it to the WAN/Internet port on the D-Link wireless router.

To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Mar 13, 2011 | D-Link AirPlus DI-524 Wireless Router

1 Answer

No internet on PC when cables going through router


Hello there,

You have to start from the beginning and my solution would be:

1) Remove any connections(also don't forget to turn of wifi on your laptop) to router and except the power cord. With the unit powered ON locate the reset pinhole on the back of router.

2) Press and hold reset button for at least 15 secs. then release, wait for 20-30 secs. before the router can completely rebooted.

3) Configure your Computer IP address to “Obtain an IP address automatically” .

4) Connect internet cable to router on port labeled "WAN". Connect PC to any LAN ports available.

5) Now lets configure wireless router. Open any browser you have (IE, Firefox, Chrome, Safari, etc.). On the address bar type: "192.168.1.1" (without quotes). Default username: admin ; default password: admin click "OK".

6) Go through "SETUP WIZARD" until you reach the "Setup WAN Interface" page. On "WAN Access Type:" select "DHCP" then click next.

7) You may configure your "Basic Wireless Settings" to Public or Private until finished configuring.

8) On "Operation Mode" be sure you operate on "Gateway" mode.

That's it! Hope this helps.

Don't forget to vote.

Mar 12, 2010 | Encore ENHWI-G2 Router

2 Answers

I need to complet my router setup


Have you secured your Linksys from unauthorized access?
The encryption code protects your wireless router from unauthorized access. The wireless card in your computer/laptop needs to be configured with the router's encryption settings before the computer/laptop can access the router.
For details on configuring the wireless router and the wireless card, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

Jan 06, 2010 | Linksys Wireless-G WRT54G Router

2 Answers

Help me to resolve a problem with my Router


To access the configuration page of the Dlink router, use a wired computer or directly connect your laptop to the router using an ethernet cable. Then open any internet browser and in the address bar type: 192.168.0.1.

Select Admin from the drop-down arrow and then enter your password. Leave the password blank by default. If it doesn't work, then you will need to reset the router.

At the back of the router there is a reset button, hold it down for 30 seconds.

Then try again to access the router. Reconfigure the router's internet connection, depending on your ISP. Under Setup>Internet page, click the Internet connection Setup Wizard button to automatically configure the router.

Then for the wireless settings, go to Setup>Wireless Settings page, then click on the Wireless Network Setup Wizard to configure the wireless settings.

Nov 11, 2009 | Computers & Internet

1 Answer

Limited or no connectivity to the internet. my setup: the telephone port is approx 30m from where i need internet access. Originally I had a dlink wireless router set up but was connected via cable, now...


On which port of the D-link router did you plug the WRT160N router?

Do this setup.

Disconnect the WRT160N from D-link.

Connect a computer to port 1 of the WRT160N. Access the setup page by typing 192.168.1.1 on the address bar. you may need to type in the username and password for WRT160N. on the setup page Change the LAN IP address from 192.168.1.1 to 192.168.2.1. save the settings.

Connect a cable from port 1,2,3 or 4 of the D-link router to the Internet port of the WRT160N. turn off everything then turn them on starting from cable modem>D-link >WRT160N then computer.

You should be able to access the internet.

Oct 08, 2008 | Computers & Internet

Not finding what you are looking for?
D-Link DIR-600 Router Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18387 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...