Question about Sylvania G-Netbook

1 Answer

I still can't connect to my FIOS. I followed the directions but I'm getting an error message "failed to associate with HAG52"

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,267 Answers

You have to follow the instructions exactly as shown below.

It is looking for a password (WiFi Network Key) You have to double click on the little computer icon down in the right tool bar area, the one with the two side radiating arcs, and possibly has a small red X under it. The red X indicates that it is NOT connected. When you double click on that icon a window called RT28701 opens up, then you click on Wireless Information tab, then you cursor down to the name of your WiFi and high light it and click the connect box. Then another window opens up called Network Properties. Uncheck "The key is provided automatically" box. This will allow you to type in your "Network Key", the password that protects your network from outsiders. This "KEY" was set up when you installed the router on your server computer. If this does not work at first, turn the machine over on it's back and using a toothpick, insert it into the little hole about an inch diagonally from the right corner of the data plate, this will re-load a new copy of everything including the WiFi RT28701 driver.

sometimes this driver gets confused. See my TIP at: http://www.fixya.com/support/r7350901-fix_synet07526_wifi_flashing


Additional Information


When I try to sign on with the red X showing, I get "The page cannot be displayed If I then double click on the icon down in the right corner I elucidated above, RT28701 opens up to "Internet Protocol (TCP/IP) with all zeros in the IP address field, and Subnet Mask, with no entries in the default gateway. That is a clue to me that the auto sign on has not found a viable network or needs something else. If I then click on Wireless Information tab, The list of available networks appear in the box. The machine keeps trying to associate my previous entered name site with my prefered site and tells me the signal is good, but it cannot link up. This is a signal to me that it has lost my Network Key or that the software has failed or both. I then click on advance and delete my prefered network and hit OK, this will force the software to ask me for my network again, and notice that the prefered is missing. I click on the name of my network again and then hit connect., then the Wireless Network properties window opens up and I can insert my Network Key again after I uncheck the "The key is provided automatically" box. I enter the key and hit the OK button. I still do not get a connection, so I reboot the machine, and wait for about 30 seconds and the machine synchs up because the little RED X under the icon has disappeared. Now the machine will hook to the internet as long as I want to, but sometimes when I turn the machine on it will not synch, so I go through the above sequence again. The secret is once you have entered your key and ask for the machine to synch up you have to reboot. Why? I do not exactly know, but I suspect that the WiFi driver looses it

Posted on Jan 03, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I solve a problem with a Epson printer that wont print because of error messages saying that printer is incompatibke with somthing called ENPAPP


If your enpapp.exe error is related to a specific program, reinstalling Epson Connect Printer Setup-related software could be the answer.
Instructions for Windows 7 and Windows Vista:
  1. Open Programs and Features by clicking the Start button.
  2. Click Control Panel on the right side menu.
  3. Click Programs.
  4. Click Programs and Features.
  5. Locate enpapp.exe-associated program (eg. Epson Connect Printer Setup) under the Name column.
  6. Click on the Epson Connect Printer Setup-associated entry.
  7. Click the Uninstall button on the top menu ribbon.
  8. Follow the on-screen directions to complete the uninstallation of your enpapp.exe-associated program.
Instructions for Windows XP:
  1. Open Programs and Features by clicking the Start button.
  2. Click Control Panel.
  3. Click Add or Remove Programs.
  4. Locate enpapp.exe-associated program (eg. Epson Connect Printer Setup) under the list of Currently Installed Programs.
  5. Click on the Epson Connect Printer Setup-associated entry.
  6. Click the Remove button on the right side.
  7. Follow the on-screen directions to complete the uninstallation of your enpapp.exe-associated program.
Instructions for Windows 8:
  1. Hover the cursor in the bottom left of the screen to produce the Start Menu image.
  2. Right-Click to bring up the Start Context Menu.
  3. Click Programs and Features.
  4. Locate enpapp.exe-associated program (eg. Epson Connect Printer Setup) under the Name column.
  5. Click on the Epson Connect Printer Setup-associated entry.
  6. Click the Uninstall/Change on the top menu ribbon.
  7. Follow the on-screen directions to complete the uninstallation of your enpapp.exe-associated program.
After you have successfully uninstalled your enpapp.exe-associated program (eg. Epson Connect Printer Setup), reinstall the program according to the SEIKO EPSON Corporation instructions.

May 05, 2015 | Epson Office Equipment & Supplies

1 Answer

SBG900 wireless association failed when we ran the Dell Wireless WLAN Card Utility. It connects via Ethernet but the wireless will not connect. Says it has "Limited or no Connectivity."


Do you get an error that says something such as "Unable to validate identity"? You can definitely fix this issue by logging into the modem and changing the security to WEP. If not WEP you can try no security. I know that no security will work but its trial and error to find out which security type will work with the Dell wireless.

Aug 21, 2011 | Arris SURFboard SBG900 Wireless Router...

1 Answer

In trying to install various versions of Adobe Reader on Windows XP SP3, I get the following error message: "Installation encountered errors; failed to initialize." I get this message on...


Yo! I will have to direct you to a website where you can download anything for your computer.i advice you download another one from here. please follow the link below..

www.download.com

Jul 27, 2011 | Computers & Internet

1 Answer

I have followed the directions given and am still not able to access the internet. When I click on "connect" it gives me an "Error from RasDial" message. Any suggestions??


go to the control pane and internet options in the connections tab look at the connection if there is a dial up connection disable or delete it.if that is ineffective choose the set up and set up a connection from there

Feb 01, 2011 | Computers & Internet

1 Answer

When I try to connect to a wirless internet connection with my Playstation 3 Obtain IP Address succeeds, Internet connection fails and I get the message "A connection error has occured....


try power cycling your router and modem, and if that doesn't do it somewhere in your system should be a menu to get to either in preferences or settings that "sets new IP address"

Jan 17, 2011 | Video Game Consoles & Games

1 Answer

My wireless connection won't work


Those pieces if data come from your FiOS gear. On the bottom of the FiOS Wireless and network set, is a serial number, and associated with that is another number, call it your password, but together they are the profile and Password with which you gain access to the FiOS Network, to allow you to get out to the Internet.
Check all installation papers you got from Verizon, as that information should be there, or call their help line. They are usually pretty good in helping you and FiOS is not off-shore, so you will get a good response.

Jul 01, 2009 | Computers & Internet

2 Answers

Error message "Can not find camera.Please connect Omnivision SuperCam!" on my Vista laptop. Scanner works fine on my friend's XP desktop. Have tried all steps outlined in manual (several tim


On my Vista desktop it worked directly, but I had the same error message on my Vista laptop when the scanner was connected through an USB hub. Perhaps the power is not sufficient?
Then i plugged the connector directly into the laptop usb port 2.0, and the driver was automatically installed and works fine!

May 10, 2009 | Office Equipment & Supplies

Not finding what you are looking for?
Sylvania G-Netbook Logo

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sylvania Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Sylvania Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...