Belt installation whirlpool stackable

Checked the manual. No such error code. Check if the lid or door can be properly shut or does it bounce back to half open. If it does then the door lock mechanism needs repair.

Download/read the user manual from here:
https://www.whirlpool.com/content/dam/global/documents/201905/owners-manual-w11330506-rev-b.pdf

oh yukkkkkkkkkk hate working on these stackables. u have to break them apart for most jobs, try googling how to take apart ur brand model and youll get instructions, sorry cant help more

remove the 12" X 12" rear access panel,then you can access the belt idler tensioner easily to install new belt on motor and idler pulley

normally u need a tune up kit,,that includes a set of rollers,belt and idler pully apx 15.00-20.00 on ebay http://www.washerwizzards.com

there should be a number on the belt take it to the spares place and they should be able to match one up for you

where is belt on ge washer stackable unit 2005
[email protected]

screw on bracket of motor for tentsion release

Could be the idler pulley, or the dryer seals.

if you have a broken belt... remove the back. and the drum support. then you can remove the belt... and replace it with the new one...pull back the pulley and them loosen the belt... let me know